Teledyne 3000MA Bedienungsanleitung

Addendum for Model 3000MA Percent Oxygen Analyzer

Page 1

Teledyne Analytical Systems

Q002870 C.O. 85723

The instruction manual included with your analysis system from

Teledyne Analytical Instruments describes the standard features of

the system. Refer to the manual for information regarding all

standard features of the model that you have selected.

In addition, your specific system has been designed according to the

needs that you specified at the time of purchase. The information

contained in this addendum addresses those needs and supersedes

any conflicting instructions and descriptions in the standard

instruction manual.

NOTE: All drawings that relate to your system are at the rear of

this manual.

System Overview

The Model 3000MA Percent Oxygen Analyzer is configured with a

Paramagnetic sensor and auto cal valves. This instrument has a

general purpose area class.

Power Requirements

This instrument operates from a power source of 220 VAC at 50/60

Hz.

Analysis Range

The Model 3000MA has three user defined analysis ranges of 0-5 to

0-100 Percent Oxygen (O2).

Signal Outputs

This Model 3000MA has a signal output of 4-20mA isolated.

Additional Operating

instructions and/or

information for your

Model 3000MA

Percent Oxygen

Analyzer

Addendum for Model 3000MA Percent Oxygen Analyzer

Page 2

Teledyne Analytical Systems

Software

The software for this instrument adds hold timers for span and zero

calibration; each calibration has its own timer separate timer.

Span Delay:

By pressing the Span key, the operator accesses the setup mode of

the span calibration. After selecting AUTO span calibration the

following screen will be the hold timer adjustment:

Span Delay: 5 min.

<ENT> For Next

The hold time for the span can be adjusted between 1 minute and 60

minutes. Five minutes is the factory default. When changed the value

is stored so it can be recovered after power down.

Zero Delay:

By pressing the Zero key, the operator accesses the setup mode of

the zero calibration. After selecting AUTO zero calibration the

following screen will be the hold timer adjustment:

Zero Delay: 5 min.

<ENT> For Next

The hold time for the span can be adjusted between 1 minute and 60

minutes. Five minutes is the factory default. When changed the value

is stored so it can be recovered after power down.

Reference Drawings

D74505 Outline Diagram

B74504 Piping Diagram

Spare Parts

A78648 EPROM Software Assembly

Project Engineer ________________ Date ______________

Andere Handbücher für 3000MA

Inhaltsverzeichnis

Andere Teledyne Analytisches Instrument Handbücher

Teledyne

Teledyne BDS 3000 Bedienungsanleitung

Teledyne

Teledyne 3010PA Bedienungsanleitung

Teledyne

Teledyne 4020 Installations- und Betriebshandbuch

Teledyne

Teledyne 3060E Bedienungsanleitung

Teledyne

Teledyne 3000TA-XL-EU Bedienungsanleitung

Teledyne

Teledyne 3300PB Bedienungsanleitung

Teledyne

Teledyne AX300-I Bedienungsanleitung

Teledyne

Teledyne 328 Bedienungsanleitung

Teledyne

Teledyne 3000TB Bedienungsanleitung

Teledyne

Teledyne Ultra Trace 3000 Bedienungsanleitung

Teledyne

Teledyne 8800A Bedienungsanleitung

Teledyne

Teledyne T3AWG2152 Bedienungsanleitung

Teledyne

Teledyne 3220 Bedienungsanleitung

Teledyne

Teledyne Snack O2 Bedienungsanleitung

Teledyne

Teledyne 306WA Bedienungsanleitung

Teledyne

Teledyne 3000TA Bedienungsanleitung

Teledyne

Teledyne 3300TA Bedienungsanleitung

Teledyne

Teledyne 3190 Series Bedienungsanleitung

Teledyne

Teledyne 6020 Bedienungsanleitung

Teledyne

Teledyne 3000PA Bedienungsanleitung

Teledyne

Teledyne GB300 Bedienungsanleitung

Teledyne

Teledyne 2120 Bedienungsanleitung

Teledyne

Teledyne TURBO2 Bedienungsanleitung

Teledyne

Teledyne 3000TA Bedienungsanleitung

Beliebte Analytisches Instrument Handbücher anderer Marken

Cocraft

Cocraft NLT04 Bedienungsanleitung

M&C

M&C GENTWO PMA1000 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON optoncdt 1700 Bedienungsanleitung

CONDTROL

CONDTROL XP4 PRO Bedienungsanleitung

Extech Instruments

Extech Instruments BR200 Bedienungsanleitung

Dewetron

Dewetron DEWE-30-16 Produkthandbuch

EXTOL PREMIUM

EXTOL PREMIUM 8820043 Montage- und Bedienungsanleitung

RIDGID

RIDGID SeeSnake Compact Bedienungsanleitung

YDLIDAR

YDLIDAR TIA Bedienungsanleitung

Olympus

Olympus IPLEX FX Series Bedienungsanleitung

Bosch

Bosch GLM 50 C Professional Bedienungsanleitung

Reflecta

Reflecta DigiEndoscope Bedienungsanleitung

Chinavision

Chinavision CVACZ-G696 Montageanleitung

Fuji Electric

Fuji Electric ZKMA Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT IC-100HD Bedienungsanleitung

RIDGID

RIDGID micro CA-25 Bedienungsanleitung

Würth

Würth MASTERVISION MINI REC Bedienungsanleitung

AMI

AMI 2001LC Bedienungsanleitung