Teledyne T3SP Series Bedienungsanleitung

Operator’s Manual

T3SP-Series Time Domain

Reectometer

T3SP-Series Operator’s Manual

Revision E - December 20, 2021

Relang to the following release versions:

Soware Version Rev. 1.8.0 and later

change without noce. Product brand or brand names are trademarks or

requested trademarks of their respecve holders.

T3 stands for Teledyne Test Tools.

931776 RevE

T3SP-Series Operator’s Manual

Contents

1 General Information about the T3SP Series 7

1.1 Intended Applicaon . . . . . . . . . . . . . . . . . . . . . . 7

1.2 Disclaimer............................ 7

1.3 Contents of Packing . . . . . . . . . . . . . . . . . . . . . . 8

2 Commissioning 9

2.1 GeneralRemarks........................ 9

2.2 Soware Conguraon File . . . . . . . . . . . . . . . . . . 10

2.3 SowareStartup........................ 10

2.4 Power Supply & USB Connecon . . . . . . . . . . . . . . . 10

2.5 Descripon of the Applicaon Windows . . . . . . . . . . . 11

2.5.1 MainWindow ..................... 11

2.5.1.1 Samples................... 12

2.5.1.2 Sample List . . . . . . . . . . . . . . . . . 14

2.5.1.3 Macro List . . . . . . . . . . . . . . . . . . 14

2.5.2 Oscilloscope Window . . . . . . . . . . . . . . . . . 15

2.5.3 Result Visualizaon Window . . . . . . . . . . . . . 18

2.5.4 Opons Dialog . . . . . . . . . . . . . . . . . . . . . 24

2.6 Soware Operaon Modes . . . . . . . . . . . . . . . . . . 27

2.6.1 Sample List Operaon Mode . . . . . . . . . . . . . 27

2.6.2 Macro Operaon Mode . . . . . . . . . . . . . . . . 27

2.6.3 Quick Operaon Mode . . . . . . . . . . . . . . . . 29

2.7 Login with Limited User Privileges . . . . . . . . . . . . . . . 30

3 Quick Start Guide 31

4 Three-Term & 12-Term Correction 38

4.1 Fundamentals ......................... 38

4.2 Requirements.......................... 38

931776 RevE

T3SP-Series Operator’s Manual

4.3 Calibraon Wizard . . . . . . . . . . . . . . . . . . . . . . . 39

4.4 General Remarks on reloading TTC/12TC Data . . . . . . . . 41

4.5 Status Indicators for TTC & 12TC . . . . . . . . . . . . . . . . 42

5 Measurement Modes 44

5.1 Impedance Measurements (Modes TDR & DTDR) . . . . . . 44

5.1.1 General Recommendaons . . . . . . . . . . . . . . 45

5.1.2 Reference Measurement . . . . . . . . . . . . . . . 48

5.1.3 Impedance Measurement Properes Window . . . . 49

5.1.4 User-dened Impedance Masks . . . . . . . . . . . 54

5.2 (D)S11 - Measurement Mode (Return Loss) . . . . . . . . . . 56

5.3 S-Parameters (Scaering Matrix, oponal) . . . . . . . . . . 57

6 Frequency Domain Smoothing 59

7 De-Embedding 60

7.1 De-Embedding Basics . . . . . . . . . . . . . . . . . . . . . 60

7.2 The De-Embedding Dialog . . . . . . . . . . . . . . . . . . . 61

7.3 Creang De-Embedding S-Parameters . . . . . . . . . . . . . 63

7.4 Addional Remarks on De-Embedding . . . . . . . . . . . . 64

8 Import & Export Modules 65

8.1 PDF-Export Module . . . . . . . . . . . . . . . . . . . . . . 65

8.2 CSV-Export Module . . . . . . . . . . . . . . . . . . . . . . . 67

8.3 Touchstone-Export . . . . . . . . . . . . . . . . . . . . . . . 67

8.4 Matlab-Export ......................... 67

9 Workshop Files 68

10 ESD-Protection Module 69

931776 RevE

T3SP-Series Operator’s Manual

11 RF-Multiplexer (optional Hardware) 71

11.1 Assigning Channels to Samples . . . . . . . . . . . . . . . . 71

11.2 Calibraon of the Mulplexer (TTC/12TC) . . . . . . . . . . . 73

11.3 De-Embedding of the Mulplexer . . . . . . . . . . . . . . . 75

11.4 Addional Remarks on Mulplexing . . . . . . . . . . . . . . 77

12 Additional Information 78

12.1 Descripon of the Toolbar Items in the Main Window . . . . 78

12.2 Descripon of the Toolbar Items in the Result Window . . . 80

12.3 Descripon of the Main Window Menu Items . . . . . . . . 81

12.4 Keyboard Shortcuts . . . . . . . . . . . . . . . . . . . . . . 86

13 Technical Specications 88

13.1 T3SP-Series Mainframes . . . . . . . . . . . . . . . . . . . . 88

13.2T3SP-DPROBE.......................... 89

13.3T3SP-DPROBE-F......................... 90

13.4T3SP-SEP ............................ 90

13.5T3SP-SEPROBE-F ........................ 91

14 Troubleshooting 92

15 Safety Instructions 94

15.1 Operang Environment . . . . . . . . . . . . . . . . . . . . 94

15.2Power.............................. 94

15.3 Safety Symbols & Terms . . . . . . . . . . . . . . . . . . . . 95

15.4 Safety Requirements . . . . . . . . . . . . . . . . . . . . . . 95

16 Maintenance 97

17 Certications 98

17.1EMCCompliance........................ 98

17.1.1 EC DECLARATION OF CONFORMITY - EMC . . . . . . 98

931776 RevE

T3SP-Series Operator’s Manual

17.1.2 AUSTRALIA & NEW ZEALAND DECLARATION OF CON-

FORMITY–EMC .................... 99

17.2 Safety Compliance . . . . . . . . . . . . . . . . . . . . . . . 100

17.2.1 EC DECLARATION OF CONFORMITY – LOW VOLTAGE 100

17.3 Environmental Compliance . . . . . . . . . . . . . . . . . . 101

17.3.1 END-OF-LIFE HANDLING . . . . . . . . . . . . . . . . 101

17.3.2 RESTRICTION OF HAZARDOUS SUBSTANCES (RoHS) . 101

931776 RevE

T3SP-Series Operator’s Manual

1. General Informaon about the T3SP Series

The T3SP series is developed to perform true dierenal TDR measurement.

Complementary step signals with an ultra-wide bandwidth are emied and

acquired by the instrument. The signals are applicable to external compo-

nents via the coaxial connectors.

Please read this operaon manual carefully before commissioning the T3SP,

to avoid incorrect operaon of the instrument. Keep this manual carefully

the enre life-me of the instrument. Subsequently the T3SP TDR is gener-

ally described as “device”.

1.1 Intended Application

The device is exclusively intended for usage in conjuncon with the deliv-

ered soware. Upon request soware libraries are available to integrate

the device control into other soware environments. Beware of using the

device for purposes other than intended.

1.2 Disclaimer

Warranty or liability claims for personal or property injury are excluded if

they are caused by one or more of the following reasons:

•Usage of the device for other purposes as described in this manual

•Disregarding the instrucons for correct operaon of the device

•Disregarding the safety instrucons listed in this operaon manual

•Opening of the instrument by the customer or user

931776 RevE

T3SP-Series Operator’s Manual

1.3 Contents of Packing

•T3SP me-domain reectometer

•USB 2.0 cable, Mini USB-B to USB-A

•External power supply: input 100-240VAC, output 24VDC, max. 3A

•Integrated ESD-protecon module

•Metal or plasc storage and transport case

•ESD-protecon kit

•Cables

•Calibraon kit including RF connector torque wrench

•Adapters (oponal)

931776 RevE

T3SP-Series Operator’s Manual

2. Commissioning

Before the rst start of operaon you have to install the provided Seunis

soware. Please follow the installaon instrucons given by the soware.

Before starng the soware connect the device and turn it on. The soware

automacally detects the connected instrument.

Remark: In rare cases, the device cannot be found. Please see the troubleshoong

secon 14 for further informaon.

2.1 General Remarks

The Seunis measurement soware was designed to make series measure-

ments and therefore the central element of the main window is a spread-

sheet-like table. For a beer understanding, some regularly used terms are

dened below:

Sample Synonym for object / device under test (DUT)

Sample List Collecon of samples in the spreadsheet table

(D)TTC =

(Dierenal)

Three-Term

Correcon

Error correcon method, removes systemac device &

external cable/connector errors

12TC =

Twelve Term

Correcon

Error correcon method for full 2-port S-parameter

measurements. Only used if full 2-port measurement

mode is available

Measurement

Modes

The soware is capable of measuring various

parameters (impedance, S11, etc.). These

funconalies are called measurement modes

931776 RevE

T3SP-Series Operator’s Manual

2.2 Software Conguration File

Some specialized hidden opons and funconalies can only be modied via

the soware conguraon le Seunis.cong. The default locaon of the con-

guraon le is C:\Users\<USERNAME>\AppData\Roaming\Teledyne.

2.3 Software Startup

To start the soware, the device must be switched on, as the available mea-

surement modes are read out from the internal memory. Alternavely the

soware can be started with the Teledyne Viewer Key.

2.4 Power Supply & USB Connection

To enable measurements, connect the USB port of the instrument to a com-

puter. Please follow the instrucons given below:

•If available plug the Mini-USB-B plug connector of the USB-cable into

the corresponding USB-jack connector of the device and the USB-A

plug into a USB-port of your computer.

•Turn on the device by pressing the power buon for more than 1 sec-

ond. Aer a few seconds, the buon LED changes to red. The device

can be turned o by pressing the power buon for more than 3 sec-

onds.

•The 2-state red-green LED signals have the following meaning:

Green blinking LED: Device switched o, baery charging acve

Red blinking LED: Device switched on, baery charging acve

Red LED turned on: Device switched on, baery charging nished

•The soware will automacally probe your USB ports to communicate

with the device. You can check if this was successful in the status bar

on the boom of the Main Window, which shows whether the device

is Connected or Not connected.

931776 RevE

Andere Handbücher für T3SP Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Teledyne Messgerät Handbücher

Teledyne

Teledyne HASTINGS 200 Series Bedienungsanleitung

Teledyne

Teledyne PS200 Series Handbuch

Teledyne

Teledyne Frontline Sodera Bedienungsanleitung

Teledyne

Teledyne HVG-2020B Bedienungsanleitung

Teledyne

Teledyne 6600 Bedienungsanleitung

Teledyne

Teledyne 4250 Betriebsanleitung

Teledyne

Teledyne 300M Bedienungsanleitung

Teledyne

Teledyne 300E Bedienungsanleitung

Teledyne

Teledyne SeaBat T Series Bedienungsanleitung

Teledyne

Teledyne SP-F-SIM Bedienungsanleitung

Teledyne

Teledyne TED 191 Bedienungsanleitung

Teledyne

Teledyne T101 Bedienungsanleitung

Teledyne

Teledyne PMAT 2000 Bedienungsanleitung

Teledyne

Teledyne T360 Bedienungsanleitung

Teledyne

Teledyne PS200-LMP Bedienungsanleitung

Teledyne

Teledyne Echotrac E20 Bedienungsanleitung

Teledyne

Teledyne HASTINGS 200 Series Bedienungsanleitung

Teledyne

Teledyne T3MIL50 Bedienungsanleitung

Teledyne

Teledyne ADFM Pro20 Bedienungsanleitung

Teledyne

Teledyne BENTHOS UDB-9000 Bedienungsanleitung

Teledyne

Teledyne HASTINGS HFM-300 Bedienungsanleitung

Teledyne

Teledyne HVG-2020A Bedienungsanleitung

Teledyne

Teledyne T3SP Series Bedienungsanleitung

Teledyne

Teledyne 100E Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung