Teledyne T360 Bedienungsanleitung

MODEL T360/T360M

CARBON DIOXIDE ANALYZER

Operation Manual

Also supports operation of:

T360U/GFC 7000E CO2 Analyzer

(when used in conjunction with T360U/GFC 7000E Addendum, PN 07273)

9480 Carroll Park Drive

San Diego, CA 92121-5201

USA

Toll-free Phone: 800-324-5190

Phone: 858-657-9800

Fax: 858-657-9816

Email: [email protected]

Website: http://www.teledyne-api.com/

Teledyne Advanced Pollution Instrumentation 13 December 2012

ABOUT TELEDYNE ADVANCED POLLUTION INSTRUMENTATION (TAPI)

Teledyne Advanced Pollution Instrumentation, Inc. (TAPI) is a worldwide market

leader in the design and manufacture of precision analytical instrumentation used

for air quality monitoring, continuous emissions monitoring, and specialty process

monitoring applications. Founded in San Diego, California, in 1988, TAPI

introduced a complete line of Air Quality Monitoring (AQM) instrumentation,

which comply with the United States Environmental Protection Administration

(EPA) and international requirements for the measurement of criteria pollutants,

including CO, SO2, NOX and Ozone.

Since 1988 TAPI has combined state-of-the-art technology, proven measuring

principles, stringent quality assurance systems and world class after-sales

support to deliver the best products and customer satisfaction in the business.

For further information on our company, our complete range of products, and the

applications that they serve, please visit www.teledyne-api.com or contact

[email protected]m.

NOTICE OF COPYRIGHT

TRADEMARKS

All trademarks, registered trademarks, brand names or product names appearing

in this document are the property of their respective owners and are used herein

for identification purposes only.

07272B DCN6552

Model T360/T360M Operation Manual Teledyne API

This page intentionally left blank.

07272B DCN6552

iii

SAFETY MESSAGES

Important safety messages are provided throughout this manual for the purpose of avoiding personal

injury or instrument damage. Please read these messages carefully. Each safety message is associated

with a safety alert symbol, and are placed throughout this manual; the safety symbols are also located

inside the instrument. It is imperative that you pay close attention to these messages, the

descriptions of which are as follows:

WARNING: Electrical Shock Hazard

HAZARD: Strong oxidizer

GENERAL WARNING/CAUTION: Read the accompanying message for

specific information.

CAUTION: Hot Surface Warning

Do Not Touch: Touching some parts of the instrument without

protection or proper tools could result in damage to the part(s) and/or the

instrument.

Technician Symbol: All operations marked with this symbol are to be

performed by qualified maintenance personnel only.

Electrical Ground: This symbol inside the instrument marks the central

safety grounding point for the instrument.

CAUTION

This instrument should only be used for the purpose and in the manner

described in this manual. If you use this instrument in a manner other tha

That for which it was intended, unpredictable behavior could ensue with

possible hazardous consequences.

NEVER use any gas analyzer to sample combustible gas(es)!

For Technical Assistance regarding the use and maintenance of this instrument or any

other Teledyne API product, contact Teledyne API’s Technical Support Department:

Telephone: 800-324-5190

Email: [email protected]

or access any of the service options on our website at http://www.teledyne-api.com/

07272B DCN6552

Model T360/T360M Operation Manual Teledyne API

CONSIGNES DE SÉCURITÉ

Des consignes de sécurité importantes sont fournies tout au long du présent manuel dans le but d’éviter

des blessures corporelles ou d’endommager les instruments. Veuillez lire attentivement ces consignes.

Chaque consigne de sécurité est représentée par un pictogramme d’alerte de sécurité; ces pictogrammes

se retrouvent dans ce manuel et à l’intérieur des instruments. Les symboles correspondent aux

consignes suivantes :

AVERTISSEMENT : Risque de choc électrique

DANGER : Oxydant puissant

AVERTISSEMENT GÉNÉRAL / MISE EN GARDE : Lire la consigne

complémentaire pour des renseignements spécifiques

MISE EN GARDE : Surface chaude

Ne pas toucher : Toucher à certaines parties de l’instrument sans protection ou

sans les outils appropriés pourrait entraîner des dommages aux pièces ou à

l’instrument.

Pictogramme « technicien » : Toutes les opérations portant ce symbole doivent

être effectuées uniquement par du personnel de maintenance qualifié.

Mise à la terre : Ce symbole à l’intérieur de l’instrument détermine le point central

de la mise à la terre sécuritaire de l’instrument.

MISE EN GARDE

Cet instrument doit être utilisé aux fins décrites et de la manière décrite dans

ce manuel. Si vous utilisez cet instrument d’une autre manière que celle pour

laquelle il a été prévu, l’instrument pourrait se comporter de façon imprévisible

et entraîner des conséquences dangereuses.

NE JAMAIS utiliser un analyseur de gaz pour échantillonner des gaz

combustibles!

07272B DCN6552

WARRANTY

Warranty Policy (02024 F)

Teledyne Advanced Pollution Instrumentation (TAPI), a business unit of Teledyne

Instruments, Inc., provides that:

Prior to shipment, TAPI equipment is thoroughly inspected and tested. Should

equipment failure occur, TAPI assures its customers that prompt service and support

will be available.

COVERAGE

After the warranty period and throughout the equipment lifetime, TAPI stands ready

to provide on-site or in-plant service at reasonable rates similar to those of other

manufacturers in the industry. All maintenance and the first level of field

troubleshooting are to be performed by the customer.

NON-TAPI MANUFACTURED EQUIPMENT

Equipment provided but not manufactured by TAPI is warranted and will be repaired

to the extent and according to the current terms and conditions of the respective

equipment manufacturer’s warranty.

Product Return

All units or components returned to Teledyne API should be properly packed for

handling and returned freight prepaid to the nearest designated Service Center.

After the repair, the equipment will be returned, freight prepaid.

The complete Terms and Conditions of Sale can be reviewed at

http://www.teledyne-api.com/terms_and_conditions.asp

CAUTION – Avoid Warranty Invalidation

Failure to comply with proper anti-Electro-Static Discharge (ESD) handling and packing instructions

and Return Merchandise Authorization (RMA) procedures when returning parts for repair or

calibration may void your warranty. For anti-ESD handling and packing instructions please refer to

“Packing Components for Return” in the Primer on Electro-Static Discharge section of this manual,

and for RMA procedures please refer to our Website at http://www.teledyne-api.com under

Customer Support > Return Authorization.

07272B DCN6552

Model T360/T360M Operation Manual Teledyne API

This page intentionally left blank.

07272B DCN6552

vii

ABOUT THIS MANUAL

This manual, PN 07272, provides operation instructions for Models T360 and T360M,

and supports operation of the Model T360U (when used in conjunction with the

T360U/GFC7000E Addendum, PN 07273). This manual is comprised of multiple

documents as listed below.

Part No. Rev Name/Description

07272 B T360 Carbon Dioxide Analyzer Operation Manual

05233 C Menu trees and software documentation (inserted as Appendix A of this manual)

06879 1/4/2011 Spare Parts List (located in Appendix B, this manual)

05235 C Repair Request Questionnaire (inserted as Appendix C of this manual)

Interconnects and Schematics included in Appendix D of this manual

0691201 B Interconnect Wire List (located in Appendix D of this manual)

06912 B Interconnect Wiring Diagram (located in Appendix D of this manual)

03297 K PCA, 03296, IR Photodetector Preamp and Sync Demodulator

03632 C PCA, 03631, 0-20mA driver

04003 N PCA, 04003, Pressure/Flow Transducer Interface

04089 A PCA, 04088, Opto Pickup Interface

04136 B PCA, 04135 Rev A, Relay

04468 B PCA, 04467, Analog Output Series Res

05803 B SCH, PCA 05802, MOTHERBOARD, GEN-5

06698 D SCH, PCA 06697, INTRFC, LCD TCH SCRN,

06882 B SCH, LVDS TRANSMITTER BOARD

06731 B SCH, AUXILLIARY-I/O BOARD

NOTE

Please read this manual in its entirety before making any attempt made to operate the instrument.

REVISION HISTORY

T360 Manual PN 07272

Date Rev DCN Change Summary

2012 Dec 13 B 6552 Administrative updates; minor technical updates

2011 Jan 12 A 5950 Initial Release

07272B DCN6552

Model T360/T360M Operation Manual Teledyne API

viii

This page intentionally left blank.

07272B DCN6552

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Teledyne Messgerät Handbücher

Teledyne

Teledyne T3SP Series Bedienungsanleitung

Teledyne

Teledyne 2150EX Betriebsanleitung

Teledyne

Teledyne TED 191 Bedienungsanleitung

Teledyne

Teledyne Kibra DDR Bedienungsanleitung

Teledyne

Teledyne Sierra M6-2 Bedienungsanleitung

Teledyne

Teledyne HVD3102 Bedienungsanleitung

Teledyne

Teledyne IsoPlane SCT-320 Bedienungsanleitung

Teledyne

Teledyne T3SP Series Bedienungsanleitung

Teledyne

Teledyne 2000A-EU Bedienungsanleitung

Teledyne

Teledyne Princeton Instruments FER785-MM Bedienungsanleitung

Teledyne

Teledyne BOSON+ CZ 14-75 Bedienungsanleitung

Teledyne

Teledyne 4220 Betriebsanleitung

Teledyne

Teledyne Everywhereyoulook T3PM1100 Bedienungsanleitung

Teledyne

Teledyne T3SA3000-NFP Bedienungsanleitung

Teledyne

Teledyne TIENet 301 Betriebsanleitung

Teledyne

Teledyne CEA 9001 Bedienungsanleitung

Teledyne

Teledyne HASTINGS 2002 Bedienungsanleitung

Teledyne

Teledyne 730 Bubbler Bedienungsanleitung

Teledyne

Teledyne T3MIL50 Bedienungsanleitung

Teledyne

Teledyne HASTINGS 200 Series Bedienungsanleitung

Teledyne

Teledyne 3300TB Bedienungsanleitung

Teledyne

Teledyne 514 Bedienungsanleitung

Teledyne

Teledyne EXPLORER Bedienungsanleitung

Teledyne

Teledyne T3LCR1002 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung