Tenmars TM-191 Bedienungsanleitung

Magnetic Field Meter

191

HB2TM1910001

Table of Contents

1Introduction...................................................................1

2Application....................................................................1

3Features.......................................................................1

4Identifying Parts............................................................2

5Measurement Procedures ............................................2

6Specifications ...............................................................4

7Battery replacement .....................................................4

8Safety Precaution.........................................................5

9End of life .....................................................................5

TM-191

1 Introduction

Safety precautions should be taken against electric appliances

in places including medical institutions, schools and residential

districts, where people usually stay for a long time, to prevent

patients, babies and senior citizens from exposure to high

electromagnetic waves.

An electromagnetic wave simply means the wave motion of the

electromagnetic field (EMF).

The change in electric fields produces magnetic fields, and the

change in magnetic fields can also generate electric fields. The

fluctuation of correlation between each other is known as

“electromagnetic waves", which is a form of energy similar to

light and heat that can be transmitted either by radiation in the

air or by an electric conductor.

It is suggested that rearrangements should be made in families

and work locations where electromagnetic fields are detected

the strongest in order to avoid prolonged exposure to excessive

lectromagnetic fields.e

2 Application

 This meter is applied to measuring electromagnetic fields

of extremely low frequency (ELF) of 30 to 300Hz.

 It is capable of measuring the electromagnetic field

radiation intensity that is produced from electric

transmission equipment, power line, microwave oven, air

conditioner, refrigerator, computer monitor, video/audio

device and so forth.

 The magnetic field unit is Tesla (T), Gauss (G),

milli-Gauss (mG) or micro-Tesla (μT).

 1 T＝10,000 G  1 G＝1,000 mG

 1μT＝10 mG

3 Features

 Switch between the display of micro-Tesla and milli-Gauss

is available.

 Data hold (HOLD)、maximum (MAX) Hold function.

 Range display(20,200,2000).

 Low battery detector “ ”.

 Over load display “OL”.

EN-1

TM-191

4 Identifying Parts

1.Sensor position.

2.LCD

3.Power on/off.

4.maximum hold button

5.Data hole button

6.mG unit select button

7.µT unit select button

8.Range select button

9.Battery cover.

5 Measurement Procedures

 Press to power on.

 Select formGunitor forµTunit.

 Position the front (refer to Figure 1) of the meter to

measure the electromagnetic waves. Try to change the

measurement angle or position for obtaining the highest

reading value (please refer to Figure 2 to 6).

 Read the measured value. The display of “OL” on the left

highest position indicates there is an overload on the

reading. Please press to select a higher range for

measurement again.

 Due to the environmental magnetic field factors, this

magnetic field meter could display a reading value that is

lower than 0.5mG prior to measuring. This is not a

malfunction of the device.

 To permanently lock and keep the reading displayed on

the LCD, press or press again to unlock.

 To retain the maximum value, press and the

reading value displayed on the LCD will keep updating to

the maximum value.

EN-2

TM-191

 Figure 1 indicate the correct measurement direction of the

electromagnetic wave.

 Figure 2,3, 4, 5 and 6 indicate the incorrect measurement

direction of the electromagnetic wave.

EN-3

TM-191

6 Specifications

 Display: 3-1/2 digits LCD, maximum reading 1999.

 Range: 200/2000 mG,20/200µT.

 Resolution: 0.1/1 mG or 0.01/0.1 µT.

 Frequency response: 30Hz to 300Hz.

 Sensor: Single Axis

 Accuracy: ±(2.5%+6dgt) at 50Hz/60Hz.

 Over load: LCD display “OL”.

 Sample rate: 2.5 times per second.

 Battery: 9V NEDA 1604, IEC 6F22 or JIS 006P.

 Battery life: Approximate 100 hours.

 Operating temperature & humidity: 5℃to 40℃,below

80% RH.

 Storage temperature & humidity: -10℃to 60℃, below

70%.

 Weight: About 170g.

 Dimensions: 130(L)*56(W)*38(H)mm.

 Accessories: User’s manual, 9V battery, Carrying case.

7 Battery replacement

WARNING

If the symbol “ ” appears on the LCD, please

replace the battery immediately

 Turn off the instrument.

 Remove the battery cover

 Replace the battery.

 Install the battery cover.

EN-4

TM-191

8 Safety Precaution

 For cleaning the instrument use a soft dry cloth. Never use

a wet cloth, solvents or water, etc..

 Operation Altitude: Up to 2000M.

 Operating Environment: Indoors use. This instrument has

been designed for being used in an environment of

pollution degree 2.

9 End of life

Caution: this symbol indicates that equipment

and its accessories shall be subject to a

separate collection and correct disposal

EN-5

TENMARS ELECTRONICS CO., LTD

6F, 586, RUI GUANG ROAD, NEIHU,

TAIPEI 114, TAIWAN.

E-mail: [email protected]

http://www.tenmars.com

Inhaltsverzeichnis

Andere Tenmars Messgerät Handbücher

Tenmars

Tenmars TM-183 Bedienungsanleitung

Tenmars

Tenmars TM-201L Bedienungsanleitung

Tenmars

Tenmars TM-91N Bedienungsanleitung

Tenmars

Tenmars TM-288 Bedienungsanleitung

Tenmars

Tenmars TM-103 Bedienungsanleitung

Tenmars

Tenmars TM-720 Bedienungsanleitung

Tenmars

Tenmars TM-4001 Bedienungsanleitung

Tenmars

Tenmars TM-731 Bedienungsanleitung

Tenmars

Tenmars TM-93 Bedienungsanleitung

Tenmars

Tenmars TM-12E Bedienungsanleitung

Tenmars

Tenmars TM-1016 Bedienungsanleitung

Tenmars

Tenmars TM-91 Bedienungsanleitung

Tenmars

Tenmars SM206 Bedienungsanleitung

Tenmars

Tenmars TM-190 Bedienungsanleitung

Tenmars

Tenmars TM-223 Bedienungsanleitung

Tenmars

Tenmars TM-102 Bedienungsanleitung

Tenmars

Tenmars TM-741 Bedienungsanleitung

Tenmars

Tenmars ST-109R Bedienungsanleitung

Tenmars

Tenmars HB2TM102001 Bedienungsanleitung

Tenmars

Tenmars TM-183 Bedienungsanleitung

Tenmars

Tenmars TM-104 Bedienungsanleitung

Tenmars

Tenmars TM-412 Bedienungsanleitung

Tenmars

Tenmars TM-411 Bedienungsanleitung

Tenmars

Tenmars TM-195 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung