Tenmars TM-215 Bedienungsanleitung

TM-215

Lux Light Meter

User’s Manual

HB2TM2150000

CONTENTS

1 Introduction.......................................................1

2 Accessories.......................................................1

3 Safety Precaution..............................................1

4 Meter Description..............................................2

5 Operation..........................................................3

5.1 Power Button..............................................3

5.2 Turn on backlight (Backlight)......................3

5.3 Data hold (HOLD) ......................................3

5.4 Time display (Time)....................................3

5.5 Luminous intensity display (CD).................4

5.6 Auto zero (ADJ 0).......................................4

5.7 Manual Record...........................................5

5.8 Manual Record Reading.............................5

5.9 Auto-recording (Data Logger).....................6

5.10 Disable Auto Power Off..............................7

5.11 Transmittance Δ% ......................................7

5.12 Averaging 4 or 5 points ..............................8

5.13 Maximum and Minimum Hold...................11

5.14 Function Settings (Setup).........................11

6 Software Installation........................................18

7 General Specifications ....................................19

8 Electrical Specifications:..................................20

8.1 Quality Indices..........................................20

8.2 Relative Visible Spectrum Response........21

9 Maintenance or Repair....................................22

10 Replace the battery.........................................23

11 End of Life Disposal ........................................23

1 Introduction

Lux Light Meter is designed for measuring

Luminance (unit: Lux/FC) and Luminous intensity

(unit: candela or CD), while complying with the

specifications: DIN5032-7-2017 Class C, JJG

245-2005 Class B, JIS C 1609-1: 2006 Class

A,CNS5119.

2 Accessories

1 Meter

1 User manual

1 USB cable

1 9V battery

1 Carrying case

1 AC 100~240V to DC 9V/0.5A(9mm) adaptor

3 Safety Precaution

Note! Please refer to this manual.

Improper use may damage the meter and its

components.

Complies with European Directive.

Do not operate in environments with flammable gas or

humid environments.

Operating altitude: up to 2000M.

Operating environment: Indoor use; Pollution degree 2.

Clean with soft cloth when dirty, such as glasses cloth. Do

not clean with chemicals and other solvents.

Class B – Equipment for use in all establishments other

than domestic.

Group 1 – RF energy generated is needed for internal

functioning.

4 Meter Description

Probe jack

9. Power button

Display

power jack

3. Data hold button /

Transmittance button

11. USB port

Backlitght button

Battery cover

5. Candela (CD) button /

Average button (for 4 or

5 points)

13 Light-detecting

6. Zero button / Maximum

and minimum button

7. Manual record (REC)/

Auto record (LOG)

8. Time display button /

Set button

5 Operation

5.1 Power Button

Press button to turn on or turn off the power.

5.2 Turn on backlight (Backlight)

Press button to turn on or turn off the

backlight.

The backlight will be turned off automatically after

lighting up for 15 seconds.

The backlight will be turned on automatically when

the meter is connected to USB or AC POWER.

5.3 Data hold (HOLD)

Press button to hold the displayed value,

then a symbol will appear. Press again to

disable it and the symbol disappears.

When the reading is held, you can only turn off

the power and use the backlight switch.

5.4 Time display (Time)

Change the display mode of hour-minute, second,

date or year.

Press button to change the display mode. If

rebooting, the display mode will be set to "hour:

minute".

5.5 Luminous intensity display (CD)

Press button to convert as Luminous intensity

mode (CD). The digit shown on the upper right

corner of the display represents the distance setting

value. Press again to exit.

5.6 Auto zero (ADJ 0)

Press button to zeroing and the symbol

will appear. If the meter is not covered with a

cap during ADJ or not covered with a cap when

button pressed, the symbol will

appear.

5.7 Manual Record

With the function, the present value displayed can

be recorded manually, including time, theluminance

value, and the distance for luminous intensity.

With pressing button, the current recorded

number and the symbol REC display. The logs of

manual record are up to 200. If more than 200 logs,

the symbol FULL displays, the logs can be cleared

up in the settings.

5.8 Manual Record Reading

This function can read 200 records of manual data,

including time, illuminance value, candle value and

candle distance setting.

Press more than 2 seconds，and

appears on the LCD，Press or to

select the log number for reading, Press

more than 2 seconds to quit this mode.

5.9 Auto-recording (Data Logger)

This function is designed to record the present

luminance value, time, and the maximum log

number is 7000.

Press button for 2 seconds to enable or

disable the auto-record function. The symbol LOG

and REC display as display turned on, and the

interval is 1 minutes in the initial setting. The symbol

REC will flash when recording.

Connect the meter to a computer for the settings

of auto-recording and data-reading.

The function auto-power off will be disabled when

automatic recording enabled.

When the log number is up to 7000, the symbol

FULL appears until exiting the auto-recording

mode or power off.

5.10 Disable Auto Power Off

Press and hold button for 2 seconds to disable

or reset to the auto-power-off when power on.

The time for auto-power off is 15 minutes.

Auto-power off function will be disabled after USB

and AC power is connected.

5.11 Transmittance Δ%

This function is designed for the measurement of

light transmittance.

Press button for 2 seconds to enter or exit

the menu for transmittance. Entering the menu and

the reference value is shown, press button for

1 second to confirm the present reference value,

and enter the mode of transmittance percentage. At

this moment, press button for 2 seconds to

confirm the present reference value.

Inhaltsverzeichnis

Andere Tenmars Messgerät Handbücher

Tenmars

Tenmars TM-223 Bedienungsanleitung

Tenmars

Tenmars TM-183 Bedienungsanleitung

Tenmars

Tenmars TM-206 Bedienungsanleitung

Tenmars

Tenmars TM-730 Bedienungsanleitung

Tenmars

Tenmars TRIAXIAL ELF Bedienungsanleitung

Tenmars

Tenmars TM-93 Bedienungsanleitung

Tenmars

Tenmars TM-1016 Bedienungsanleitung

Tenmars

Tenmars TM-185 Bedienungsanleitung

Tenmars

Tenmars TM-721 Bedienungsanleitung

Tenmars

Tenmars TM-203 Bedienungsanleitung

Tenmars

Tenmars TM-190 Bedienungsanleitung

Tenmars

Tenmars TM-288 Bedienungsanleitung

Tenmars

Tenmars TM- 4100D Bedienungsanleitung

Tenmars

Tenmars TM-213 Bedienungsanleitung

Tenmars

Tenmars TM-223 Bedienungsanleitung

Tenmars

Tenmars TM-103 Bedienungsanleitung

Tenmars

Tenmars HB2TM102001 Bedienungsanleitung

Tenmars

Tenmars ST-109R Bedienungsanleitung

Tenmars

Tenmars TM-731 Bedienungsanleitung

Tenmars

Tenmars TM-213 Bedienungsanleitung

Tenmars

Tenmars TM-412 Bedienungsanleitung

Tenmars

Tenmars TM-291 Bedienungsanleitung

Tenmars

Tenmars TM-218 Bedienungsanleitung

Tenmars

Tenmars TM201 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung