Tenmars TM-213 Bedienungsanleitung

UV-AB Meter

TM-213

HB2TM2130002

User’s

Manual

TENMARS ELECTRONICS CO., LTD

CONTENTS

1. FOREWORD ............................................................................. 1

2. FEATURES ............................................................................... 1

3. APPLICATIONS Industrial .................................................... 1

4. LABORATORY ......................................................................... 2

5. NAME AND FUNCTION OF EACH PART ....................... 2

6. ELECTRIC SPECIFICATION SPECIFICATIONS .......... 3

7. TEST PROCEDURE .............................................................. 4

8. SAFETY AND MAINTENANCE ........................................... 6

9. BATTERY REPLACEMENT ................................................. 6

10. SERVICE ................................................................................... 7

11. END OF LIFE ............................................................................ 9

TM-213

1. FOREWORD

Thank you for purchasing our product. Please, read the

operating instructions in details before you use this UVAB

optics meter, so you will operate the meter correctly. This

meter can be used in industry and home.

2. FEATURES

˙ Professional, high quality UV meter.

˙ Ultra-violet irradiation measurement of UV

˙ UV detector spec trim from 290 nm to 390 nm.

˙ Measurement range: 3999 uW/cm2 and 39.99 W/cm2

˙ Build Zero button.

˙ Microprocessor circuit provides high reliability and durability.

˙ Separate UV LIGHT probe allows user to measure the

UV light at an optimum position.

˙ LCD display, easy readout.

˙ Overload display OL.

˙ Power off : Manual on/off by push button, or auto shut off

after 15 minutes

˙ Measurement: There 1μw/cm2, 1.00mW/cm2.

3. APPLICATIONS INDUSTRIAL

˙ Monitoring blue light radiation hazards in welding.

˙ UV sterilization.

˙ Graphic arts.

˙ Photochemical matching.

˙ UV EPROM erasure.

˙ Photos resist exposure.

˙ Curing of inks, adhesives and coatings.

˙ Convenient, no need to adjust, data displayed clearly.

TM-213

4. LABORATORY

˙ Weathering "degradation studies".

˙ UV sterilization.

˙ Virology.

˙ Microbial genetics.

˙ DNA research.

˙ Biologic hoods.

˙ General laboratory use.

5. NAME AND FUNCTION OF EACH PART

5.1. THE LCD DISPLAY SHOWS

1. Main display

2. Reading lock.

3. ZERO display.

4. Low power reminder

display.

5. uW/cm2 unit display.

6. mW/cm2 unit display.

7. Decimal point display.

5.2. BUTTONS:

1. The power switch button.

2. Backlight button.

3. hold lock button.

4. zero button.

5. UNIT buttons.

TM-213

6. ELECTRIC SPECIFICATION SPECIFICATIONS

˙ DISPLAY : 3-3/4 digits LCD with maximum reading 4000.

˙ Range : uW/cm2、mW/cm2.

˙ Ranges and range : 3999 uW/cm2 ~39.99mW/cm2 (1000

uW/ cm2=1 mW/cm2).

˙ UV sensor spectrums Band pass : 290 nm to 390 nm.

˙ Accuracy : (±4%FS +2dgt ) FS: full scale

15%:sunlight ultraviolet.

˙ Peak sensitivity wavelength : 365 nm

˙ Sample Time Approx. 3 sec.

˙ Accuracy : < ±3 / year.

˙ Over-input : Display shows" OL".

˙ Operating : Temperature 5℃~40℃, below 80%RH.

˙ Storage temp. & RH : -10℃~60℃, below 70%RH.

˙ Battery life : Approx.50 hr.

˙ Size Main instrument : 133 x 48 x 27 mm. approx 90g.

˙ EMC : this instrument is EMC-compliant and has

undergone compatibility tests according to EN61326

(1997) + A1 (1998) + A2 (2001).

 ACCESSORIES

˙ User manual.

˙ 2 batteries 1.5V AAA MN2400 LR03 AM4.

˙ Carrying case.

TM-213

7. TEST PROCEDURE

7.1. POWER BUTTON

˙ Press the “ ” button to turn ON the power. The display

comes alive.

˙ Press the “ ” button once again to turn OFF the power

and put the device go into sleep mode. The display

changes from light to dark.

7.2. ZERO“ BUTTON“

˙ Press the “ “button for the zero adjustment if any

digits are appearing.

˙ If performing the zero adjustment after powering on,

several digits may not disappear. In this case, perform the

zero adjustment again.

TM-213

7.3. BACKLIGHT DISPLAY AND READING IN THE

DARK.

˙ Press“ ”key backlight light on. Again Press“ ”

button to power off.

˙ Backlight light turns off automatically after 30 seconds.

7.4. UNIT BUTTON:

˙ Press the “ ” button to turn ON the power and put the

device to operating mode. The screen displays

0000uW/cm2. Press the “ ” button to switch from

0000uW/cm2 to 00.00mW/cm2. To select a different unit,

just press this button once again.

7.5. DATA HOLD BUTTON:

˙ Press the “ ” button to go into hold mode, and “ ”

appears on the screen to allow you to read the data.

Press this button once again to deactivate it.

TM-213

8. SAFETY AND MAINTENANCE

˙ Operating altitude: below 2,000m.

˙ Operating environment: for indoor and outdoor use,

expose to pollution level II.

˙ This is a precision device. During use or storage, do not

go beyond its spec. to prevent any possible damage or

danger.

˙ Do not put this device in direct sunlight or where it is hot

and/or damp.

˙ Remember to turn OFF the power after use. For long

storage, remove the battery to prevent the battery from

leaking to cause damage to the parts inside.

˙ Clean the device with a dry soft cloth. Wet cloths, liquid

and water are prohibited.

9. BATTERY REPLACEMENT

When the symbol " " is displayed, batteries need

replacement.

CAUTION

Before replacing batteries disconnect the

test leads from any energized circuits to

avoid electrical shocks.

˙ Turn OFF the meter and disconnect the test leads from

the input terminals.

˙ Use of hand or screwdriver Unscrew the battery cover

and remove the battery. Insert a new battery of the same

type (2 batteries 1.5V AAA MN2400 LR03 AM4)

TM-213

˙ Observing the proper polarity, re-screw the battery cover

and reposition the protective holster.

10. SERVICE

˙ Warranty Conditions.

˙ This instrument is guaranteed for one year against

material or production defects, in accordance with our

general sales conditions. During the warranty period the

manufacturer reserves the right to decide either to repair

or replace the product.

˙ Should you need for any reason to return back the

instrument for repair or replacement take prior

agreements with the local distributor from whom you

bought it. Do not forget to enclose a report describing the

reasons for returning (detected fault). Use only original

packaging. Any damage occurred in transit due to non

original packaging will be charged anyhow to the

customer.

˙ The warranty doesn’t apply to:

˙ Accessories and batteries (not covered by warranty).

˙ Repairs made necessary by improper use (including

adaptation to particular applications not foreseen in the

instructions manual) or improper combination with

TM-213

incompatible accessories or equipment.

˙ Repairs made necessary by improper shipping

material causing damages in transit.

˙ Repairs made necessary by previous attempts for

repair carried out by non skilled or unauthorized

personnel.

˙ Instruments for whatever reason modified by the

customer himself without explicit authorization of our

Technical Dept.

The contents of this manual may not be reproduced in any

form whatsoever without the manufacturer’s authorization.

Our products are patented and our logotypes registered. We

reserve the right to modify specifications and prices in view

of technological improvements or developments which might

be necessary.

 Service

If the equipment is an exception, calling repair before you

test the battery and test lines and other conditions, if

necessary, replace it.

If the device still does not operate, check whether the

operating procedures described in this manual consistent.

To equipment repair, you must return the service at the (local

address or regional offices), the customer pays the freight

must be obtained before sending the other party's consent.

Must be used to send the original packaging and included in

the device more clearly as possible the content.

If you do not use the original packaging to send the sender

will be responsible for damage caused.

Shouldn’t the instrument work properly, before contacting

your distributor make sure that batteries are correctly

Andere Handbücher für TM-213

Inhaltsverzeichnis

Andere Tenmars Messgerät Handbücher

Tenmars

Tenmars TM-103 Bedienungsanleitung

Tenmars

Tenmars TM-102 Bedienungsanleitung

Tenmars

Tenmars TM-4001 Bedienungsanleitung

Tenmars

Tenmars SM206 Bedienungsanleitung

Tenmars

Tenmars TM-215 Bedienungsanleitung

Tenmars

Tenmars TM-91 Bedienungsanleitung

Tenmars

Tenmars TM-731 Bedienungsanleitung

Tenmars

Tenmars TM201 Bedienungsanleitung

Tenmars

Tenmars TM-4100 Bedienungsanleitung

Tenmars

Tenmars TM-91N Bedienungsanleitung

Tenmars

Tenmars TM-186 Bedienungsanleitung

Tenmars

Tenmars TM-213 Bedienungsanleitung

Tenmars

Tenmars TM-740 Bedienungsanleitung

Tenmars

Tenmars TM-197 Bedienungsanleitung

Tenmars

Tenmars TM-206 Bedienungsanleitung

Tenmars

Tenmars TM-411 Bedienungsanleitung

Tenmars

Tenmars TRIAXIAL ELF Bedienungsanleitung

Tenmars

Tenmars TM-802 Bedienungsanleitung

Tenmars

Tenmars TM-720 Bedienungsanleitung

Tenmars

Tenmars TM-730 Bedienungsanleitung

Tenmars

Tenmars TM-1016 Bedienungsanleitung

Tenmars

Tenmars TM-190 Bedienungsanleitung

Tenmars

Tenmars TM-196 Bedienungsanleitung

Tenmars

Tenmars TM-740 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung