Tenmars TM-206 Bedienungsanleitung

Solar Power Meter

TM-206

User’s Manual

HB2TM2060002

-3-

CONTENTS

1. FOREWORD……………………………………….4

2. WARNING AND PRECAUTIONS

3. APPLICATIONS

4. NAME AND FUNCTION OF EACH PART

5. ELECTRIC SPECIFICATION

6. ACCESSORIES

7. SAFETY AND MAINTENANCE

8. BATTERY REPLACEMENT

9. END OF LIFE

……………….4

..…….5

.….…....................8

...……........................................9

..…...............….9

.....................…….10

...........................................…….10

........................……………...….4

‐4‐

1. FOREWORD

The instrument measure the solar power from the solar

power.

2. WARNING AND PRECAUTIONS

CAUTION

For your own safety and to avoid damaging the

instrument follow the procedures described in this

instruction manual and read carefully all notes

preceded by this symbol .

Avoid doing that in humid or wet places.

Avoid doing that in rooms where explosive gas,

combustible gas, steam or excessive dust is

present.

3. APPLICATIONS

Transmission measurement is most suitable for

measuring the effectiveness of the solar film.

Solar radiation measurement.

Car windows light intensity measurement.

Optimal incident angle for the solar panel.

Convenient, no need to adjust, data displayed

clearly.

‐5‐

4. NAME AND FUNCTION OF EACH PART

4.1 THE LCD DISPLAY SHOWS:

1. Data hold .

2. Max. value.

3. Min. value.

4. Decimal point.

5. Numeral screen.

6. W/m2 unit

7. BTU (ft2*h) unit

8. Low battery indicator

4.1.1. Power button:

Turn power on or off .

4.1.2. Lock up Max. and Min button:

When you test in W/m

or BTU (ft

*h) press the

“ ” button to display the max. or min. reading.

Press and hold the “ ” button for 1 second to

allow the device to read the max. value. Press the button

one more time to read the min. value.

Press and hold the “ ” button for more than 1

second, and the max. and min. come off.

When the “ ” button is functional, the “ ”

button is disabled.

‐6‐

4.1.3. BTU (ft

*h) / W/m

button:

The screen displays BTU (ft

*h). Press the “ ”

button to switch from BTU (ft

*h) to W/m

. To select

a different unit, just press this button once again.

4.1.4 Data hold button:

Freezes the reading present on the LCD at the

moment the button is pressed.

Press HOLD again to disable Data Hold.

4.1.5. Manual range selection:

If “199.9” comes up on the screen, it suggests the

device will become overloaded or has become

overloaded “OL”. In this case, press the “ ”

button, and “1999” or your acquired value then

comes up.

4.2. OPERATION

1. Press the button to turn power on or off.

2. Remove sensor cap and place the sensor

perpendicular to the light.

3. Select button scale and range for reading.

4. When done testing, replace the sensor cover to protect

the filter and sensor.

‐7‐

Picture 2:

Picture 3:

Measure the solar insulation effect of your house’s

windows:

Close the window. Press the “ ” button on

To test the sun’s

intensity, put the

device up close

to the window.

Turn on the headlights

and put the device

down close to them to

test their intensity.

To test the sun’s intensity, put

the device close to the

windo

‐8‐

your TM-206 solar meter, and “00.0” comes up on

the screen. Put the device close to the window

and aim it at the sun. Compare the value against

that acquired when the window is closed and the

device is placed at the same position, in order to

understand the window’s heat efficiency.

(Picture3)

5. ELECTRIC SPECIFICATION

Battery life: approx. 100 hr.

Accuracy：typically within ±10W/m2[ ±3 BTU /

(ft2*h) ] or ±5% , whichever is greater in sunlight;

Additional temperature induced error ±0.38W/m2/

℃[ ±0.12 BTU / (ft2*h)/℃] from 25℃

Operating temp. & RH: 5℃~40℃, below 80%RH.

Storage temp. & RH: -10℃~60℃, below 70%RH.

DISPLAY：3-1/2 digits LCD with maximum reading

1999.

Sampling Time：Approx. 0.25 second

Resolution：0.1W/m2, 0.1 BTU /(ft2*h).

Accuracy: < ±3/year

Over-input：Display shows" OL".

Range：1999W/m2, 634 BTU /(ft2 * h).

Dimensions & weight: 132(L) x 60(W) x 38 (H)mm,

approx. 150g.

EMC: this instrument is EMC-compliant and has

undergone compatibility tests according to

EN61326 (1997) + A1 (1998) + A2 (2001).

‐9‐

6. ACCESSORIES

User manual.

9V battery(NEDA 1604 IEC 6F 22 JIS 006P)*1

carrying case.

7. SAFETY AND MAINTENANCE

Operating altitude: below 2,000m.

Operating environment: for indoor use, expose to

pollution level II.

This is a precision device. During use or storage,

do not go beyond its spec. to prevent any possible

damage or danger.

Do not put this device in direct sunlight or where it

is hot and/or damp.

Remember to turn OFF the power after use. For

long storage, remove the battery to prevent the

battery from leaking to cause damage to the parts

inside.

Clean the device with a dry soft cloth. Wet cloths,

liquid and water are prohibited.

‐10‐

8. BATTERY REPLACEMENT

When the symbol " " is displayed, batteries need

replacement.

CAUTION

Before replacing batteries disconnect the

test leads from any energized circuits to

avoid electrical shocks.

9. END OF LIFE

Caution: this symbol indicates that

equipment and its accessories shall

be subject to a separate collection

and correct disposal.

Andere Handbücher für TM-206

Inhaltsverzeichnis

Andere Tenmars Messgerät Handbücher

Tenmars

Tenmars TM-741 Bedienungsanleitung

Tenmars

Tenmars TM-183N Bedienungsanleitung

Tenmars

Tenmars ST-109R Bedienungsanleitung

Tenmars

Tenmars TM-91 Bedienungsanleitung

Tenmars

Tenmars TM-731 Bedienungsanleitung

Tenmars

Tenmars TM-183 Bedienungsanleitung

Tenmars

Tenmars TM-188 Bedienungsanleitung

Tenmars

Tenmars TM-196 Bedienungsanleitung

Tenmars

Tenmars TM-188 Bedienungsanleitung

Tenmars

Tenmars TM-215 Bedienungsanleitung

Tenmars

Tenmars TM-201L Bedienungsanleitung

Tenmars

Tenmars TRIAXIAL ELF Bedienungsanleitung

Tenmars

Tenmars ST-140 Bedienungsanleitung

Tenmars

Tenmars TM-291 Bedienungsanleitung

Tenmars

Tenmars TM-102 Bedienungsanleitung

Tenmars

Tenmars TM-190 Bedienungsanleitung

Tenmars

Tenmars TM-103 Bedienungsanleitung

Tenmars

Tenmars TM-197 Bedienungsanleitung

Tenmars

Tenmars TM-185 Bedienungsanleitung

Tenmars

Tenmars TM-223 Bedienungsanleitung

Tenmars

Tenmars TM-4001 Bedienungsanleitung

Tenmars

Tenmars TM-209 Bedienungsanleitung

Tenmars

Tenmars TM-213 Bedienungsanleitung

Tenmars

Tenmars TM-190 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung