Tenmars TM-741 Bedienungsanleitung
Air Velocity Meter
TM-741
TM-740
User’s manual
HB2TM7410000
Contents
1. Description....................................... 4
2. Safety Precaution............................ 4
3. features............................................ 5
4. Specifications .................................. 5
5. Accessories : ................................... 6
6. Air Velocity Measures...................... 7
7. Operation......................................... 8
7.1Velocity Unit Button: ................................ 8
7.2CAL / ℃/℉Button:................................. 8
7.3℃/℉Button :.......................................... 8
7.4MAX/MIN/AVG Button : ........................... 8
7.5Data Hold button:..................................... 9
7.6Power Button:.......................................... 9
7.7Auto Power:............................................. 9
7.8Enable/disable auto power off................. 9
8. Instrument Description................... 10
9. Battery Replacement......................11
10. End of life...................................11
TM-741/TM-740
4
1. DESCRIPTION
The meter measures air speed and temperature.
It is ideal for spot measurements.
at air outlets on account of its 30mm vane. In
addition to air speed and temperature.
2. SAFETY PRECAUTION
CAUTION
Be extremely careful for the following
conditions while measuring.
Do not operate the meter under the
environment with explosive gas (material),
combustible gas (material) steam or filled with
dust.
In order to avoid reading incorrect data, please
replace the battery immediately when the
symbol " " appears on the LCD.
In order to avoid the damage caused by
contamination or static electricity, do not touch
the circuit board before you take any adequate
action.
Operating Environment : Indoors use. This
instrument has been designed for being used
in an environment of pollution degree 2.
Operation Altitude : Up to 2000M.
EMC : EN61326-1(2006), IEC 61000-4-2(2008,
IEC 61000-4-3(2006) + (2007).
TM-741/TM-740
5
3. FEATURES
30mm 6 plastics vane.
Light air response 0.4m/s.
Max/Min/Avg and data hold.
Auto power off with disable function.
4. SPECIFICATIONS
General Specifications
Display : Dual LCD display. The maximum
value on the primary display is 9999. The
maximum value on secondary display is 999.
Low Battery Indicator : When the LCD displays
" " symbol, please replace the battery.
Sampling Rate : 1 sample per second.
Power Supply : 2 batteries 1.5V AAA MN2400
LR03 AM4.
Battery Life : 50 hours during consecutive use.
Dimensions : 135 × 48 × 23 mm (L × W × H).
Weight : 80g (excluding the battery).
Operating Temperature and Humidity :
5°C ~ +50°C, <95% RH.
Storage Temperature and Humidity :
-10 to 60°C, <70% RH.
TM-741/TM-740
6
Electrical Specification:
Velocity:
Unit Range Resolution Accuracy
m/s 0.4~25 0.1 ±2﹪+0.2
Km/hr(kph) 1.5~90 0.1 ±2﹪+0.8
mph 0.9~55 0.1 ±2﹪+0.4
Knots(kts) 0.8~48 0.1 ±2﹪+0.4
ft/min(fpm) 79~4921 1±2﹪+40
Temperature:
Unit Range Resolution Accuracy
℃
-20~50 0.1
±1
℃
℉
-4~122 0.1
±1.8
℉
5. ACCESSORIES :
User manual.
1.5V battery (AAA MN2400 LR03 AM4)*2.
Carrying case.
TM-741/TM-740
7
6. AIR VELOCITY MEASURES
Fallow the arrows to measure velocity. As
shown in figures.
WARNING
Please don’t touch the vanes by fingers
or foreign body to avoid damage to the
vanes.
TM-741/TM-740
8
7. OPERATION
7.1 Velocity Unit Button:
Select the m/s Knots(kts) ft/min(fpm)
Km/hr(kph) mph.
7.2 CAL / ℃/℉Button:
Calibration of 10 m/s
1. Prepare the 10m/s velocity.
2. Press CAL button and POWER button
more than 2 second the LCD will
display CAL.
3. Unlocks buttons.
4. Press CAL button again more than 2
second the meter will shut down.
5. Correct succeed.
7.3 ℃/℉Button :
Select ℃/℉.
7.4 MAX/MIN/AVG Button :
Press “MAX/MIN” button simultaneously
Lockup data maximum and average and
minimum value of measure data. Press
the “MAX/MIN” button for more than 1
second to disable this feature.
TM-741/TM-740
9
7.5 Data Hold button:
Freezes the reading present on the LCD
screen at the moment the button is
pressed.
7.6 Power Button:
Press the ” ” button more than 2
second to power on the meter.
7.7 Auto Power:
To save battery life, the meter powers
down automatically after approximately
12 minutes of inactivity.
7.8 Enable/disable auto power off
Power Off by pressing the ” ” button
more than 2 second the LCD “ ” symbol
will disappear or enable.
TM-741/TM-740
10
8. INSTRUMENT DESCRIPTION
1. Vane.
2. Display (LCD).
3. Velocity unit select button.
4. Calibration and ℃/℉ button.
5. Data hold button.
6. Maximun/Average/minimum button.
7. Power Button : ON/OFF.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Tenmars Messgerät Handbücher
Tenmars
Tenmars TM-190 Bedienungsanleitung
Tenmars
Tenmars TM-101 Bedienungsanleitung
Tenmars
Tenmars TM-195 Bedienungsanleitung
Tenmars
Tenmars TM-206 Bedienungsanleitung
Tenmars
Tenmars TM-188 Bedienungsanleitung
Tenmars
Tenmars TM-102 Bedienungsanleitung
Tenmars
Tenmars TM-188 Bedienungsanleitung
Tenmars
Tenmars TM-103 Bedienungsanleitung
Tenmars
Tenmars ST-109R Bedienungsanleitung
Tenmars
Tenmars TM-201L Bedienungsanleitung
Tenmars
Tenmars TM-91 Bedienungsanleitung
Tenmars
Tenmars TM-183 Bedienungsanleitung
Tenmars
Tenmars TM-218 Bedienungsanleitung
Tenmars
Tenmars TM201 Bedienungsanleitung
Tenmars
Tenmars TM-411 Bedienungsanleitung
Tenmars
Tenmars TM-223 Bedienungsanleitung
Tenmars
Tenmars HB2TM102001 Bedienungsanleitung
Tenmars
Tenmars TM-104 Bedienungsanleitung
Tenmars
Tenmars TM-4100 Bedienungsanleitung
Tenmars
Tenmars TM-91N Bedienungsanleitung
