Tennsco LSS-361872 Bedienungsanleitung

Tennsco LLC., Dickson, TN 37056-1888 • (866) 446-8686

ASSEMBLY INSTRUCTIONS & PARTS MANUAL

RETAIN INSTRUCTIONS FOR FUTURE REFERENCERETAIN INSTRUCTIONS FOR FUTURE REFERENCE

GENERAL SAFETY INFORMATIONGENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.

For safety, wear a pair of work gloves when assembling or performing any maintenance on the units.

LIMITED WARRANTYLIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply

in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons not authorized by Seller, where goods are damaged during

shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND SHALL IN NO

EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the

goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty

and are returned within the warranty period stated above.

PK-2910520PK-2910520

Stur-D-Store Home Shelving System

Models: LSS-361872 and LSS-482484

LOAD CAPACITIES PER SHELF LEVELLOAD CAPACITIES PER SHELF LEVEL

36w x 18d

48w x 24d

1000 lbs.

850 lbs.

UNIT SIZEUNIT SIZE WEIGHT CAPACITYWEIGHT CAPACITY

ASSEMBLY OF VERTICAL SHELVING UNIT

Two people are recommended for assembly. Approximate assembly time: 15-20 minutes.

The reference numbers used throughout this sheet refer to the illustration on the back cover.

This is to help you to identify the various parts as they are mentioned.

1. Create a unit end by connecting two uprights

(Ref. No. 1) with one of the front-to-back shelf

supports (Ref. No. 2) by inserting the shelf support

rivets into the bottom two keyhole slots of each

upright using a rubber mallet to seat the upright

securely in the keyhole slots.

NOTE: Be sure that the narrow end of

the keyhole slots are pointing downward,

and the ﬂat edge of the shelf support

is facing up.

Tool Required: Rubber Mallet

2. Place a second front-to-back shelf support halfway up the upright

assembly to complete one bottom side. Repeat

these steps to prepare a second set of uprights

giving you two upright end assemblies. Set them

with the angled

corners facing

inward toward

each other.

3. Connect two of the left-to-right shelf supports

(Ref. No. 3) between the two assemblies, one

on each side with angled corners facing

toward each other. Be sure to use

the two keyhole slots

nearest the oor, as

in step 1.

NOTE: As in step one,

make sure the ﬂat

edge of the shelf

supports are facing

upwards. If this has

been done correctly,

there would now be

a ﬂat surface around

all four edges on which to lay the bottom particle board

shelf. If any edges have an upward facing angled edge, the

support has been inserted upside down.

4. Repeat step 3 halfway up the upright post.

5. Mount another upright

post to the top of one of

the other uprights and

attach with a shelf

support as in step 1,

mounting the bottom

rivet of the shelf support

in the bottom upright

post and the top rivet

in the new upright post as

shown below.

6. Place another upright

post on the opposite side

of the one you just

mounted. Using the

other side of the same

shelf support, attach in

the same way described

in step 5.

NOTE: Be sure that the narrow

end of the keyhole slots of the

new posts are pointing down

ward, and that the ﬂat side of

the shelf support is facing

upward.

7. Repeat steps 5 and 6 on the

opposite end of the unit. Then,

attach the two ends by placing

two left-to-right shelf supports

across the width of the unit as

in step 4.

8. Continue placing shelf levels,

one level halfway between

the center shelf and the top,

and one level using the top

two keyhole slots. Make sure

all shelf supports are mounted

with the at side facing up.

Place the plastic shelf post

cap (Ref. No. 5) over the top

of the exposed metal edges of

the upright post.

9. Place one particle board shelf

(Ref. No. 4) in each of the ve

levels of shelf supports. Slant

each piece slightly as it is

being placed to allow it to

t between the uprights

and the shelf supports. Make

sure each piece of particle

board is seated between all

the edges of each of the shelf

supports and that the particle

board is laying at when

nished. The shelving system is

now ready for use.

ASSEMBLY OF HORIZONTAL SHELVING UNIT

1. First, follow assembly

steps 1-4 on the

previous page as well

as adding the plastic

shelf post caps. Next,

instead of stacking

the uprights on top

of each other as shown

in step 5, place the four

shelf supports in the

top two keyhole slots,

being sure that the

at edge of each

shelf support is facing

up as described in

the earlier steps.

2. Build the second unit

in the same manner as

the rst unit, except this

part will only have two

levels. Use the shelf

supports to create the

top level using the top

two keyhole slots,

and the second level

using the bottom two

keyhole slots.

3. Insert one particle board shelf at each of the ve shelf levels, as

described in step 9 of the previous instructions. Then place the

two units together or use separately as desired. The shelving unit

is now ready for use.

NOTE: For stability, be

sure to always have a

shelf on the bottom

of both units.

NOTE: Units are meant for stand alone

only. For safety, NEVER double stack

multiple units on top of one another.

NOTE: Units are meant

for stand alone only.

For safety, NEVER double stack

multiple units on top of each other.

⁭⁭

REPLACEMENT PARTSREPLACEMENT PARTS

Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.

However, should your unit contain missing or damaged parts, please contact your purchase location.However, should your unit contain missing or damaged parts, please contact your purchase location.

REF. NO. DESCRIPTIONREF. NO. DESCRIPTION

PART NUMBERSPART NUMBERS

LSS-361872LSS-361872

QTY.QTY. LSS-482484LSS-482484

1 Upright Post 8 VEUR-36 VEUR-42

2 Front-to-Back Shelf Support 10 VDRS-1816 VDRS-2416

3 Left-to-Right Shelf Support 10 VDRS-3616 VDRS-4816

4 Particle Board Shelf 5 PB-3618 PB-4824

5 Plastic Shelf Post Cap 8 EURPC EURPC

WARNING: This product can expose you to chemicals including formaldehyde which is known to

the State of California to cause cancer. For more information, go to www.P65Warnings.Ca.gov

⁭⁭

Upright PostUpright Post

(Ref No. 1)(Ref No. 1)

Front-to-Back Shelf SupportFront-to-Back Shelf Support

(Ref No. 2)(Ref No. 2)

Left-to-Right Shelf SupportLeft-to-Right Shelf Support

(Ref No. 3)(Ref No. 3)

Particle BoardParticle Board

(Ref No. 4)(Ref No. 4)

49B291

Plastic Shelf Post CapPlastic Shelf Post Cap

(Ref No. 5)(Ref No. 5)

⁭⁭

Dieses Handbuch passt für folgende Modelle

Andere Tennsco Inneneinrichtung Handbücher

Tennsco

Tennsco SRS-601878 Series Bedienungsanleitung

Tennsco

Tennsco 1-Wide Welded Base for Lockers without Legs Bedienungsanleitung

Tennsco

Tennsco Z Series Bedienungsanleitung

Tennsco

Tennsco CC-30 Bedienungsanleitung

Tennsco

Tennsco Capstone Shelving Units Bedienungsanleitung

Tennsco

Tennsco J1878C-N Bedienungsanleitung

Tennsco

Tennsco 1870RH Bedienungsanleitung

Tennsco

Tennsco SINGLE TIER Bedienungsanleitung

Tennsco

Tennsco 4218 Bedienungsanleitung

Tennsco

Tennsco WBHC-1516-MGY Bedienungsanleitung

Tennsco

Tennsco Jumbo Storage Cabinet J2478SU Bedienungsanleitung

Tennsco

Tennsco 7218 Bedienungsanleitung

Tennsco

Tennsco 1842 Bedienungsanleitung

Tennsco

Tennsco B-3000 Bedienungsanleitung

Tennsco

Tennsco 1276 Series Bedienungsanleitung

Tennsco

Tennsco Imperial Shelving Bedienungsanleitung

Tennsco

Tennsco ZA7-4824S-4D Bedienungsanleitung

Tennsco

Tennsco 2476 Series Bedienungsanleitung

Tennsco

Tennsco CINCO NIVELES Bedienungsanleitung

Tennsco

Tennsco Standard Combination Cabinet CVD7214 Bedienungsanleitung

Tennsco

Tennsco 1871 Bedienungsanleitung

Tennsco

Tennsco 7818 Bedienungsanleitung

Tennsco

Tennsco RGL-1236S Bedienungsanleitung

Tennsco

Tennsco 1472 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung