Tennsco 2476 Series Bedienungsanleitung

Tennsco LLC., Dickson, TN 37056-1888 • (866) 446-8686

ASSEMBLY INSTRUCTIONS & PARTS MANUAL

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE

GENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.

For safety, wear a pair of work gloves when assembling or performing any maintenance on the units.

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply in

the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons not authorized by Seller, where goods are damaged during

shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND SHALL IN NO

EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the

goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty

and are returned within the warranty period stated above.

PK-2160419

36” or 48” Wide Double Entry Letter or

Legal Size Imperial Shelving System

Model Series: 2476, 2488, 247848, 248848, 3076 & 3088

Starter Unit Add-On Unit

ASSEMBLY OF IMPERIAL DOUBLE ENTRY UNIT

Two people are recommended for assembly. Approximate assembly time: 30-40 minutes.

The reference numbers used throughout this sheet refer to the illustration on the back cover.

This is to help you to identify the various parts as they are mentioned.

1. Determine whether you will be assembling a single unit, or multiple

units joined together. For a single unit, use two “L” uprights (Ref.

No. 1). For multiple units, use one “L” upright and one “T” upright

(Ref. No. 2).

NOTE: Supports are not fully seated unless you can see

an open space through the hole in the shelf support as

shown above.

Tool Required: Rubber Mallet

2. Examine the slots on the two uprights you have

selected. When an upright is standing up on end,

the narrow part of the keyhole slots should be

toward the oor, while the wide part should be

toward the top.

3. After determining which end of the upright is the bottom, attach a

plastic foot (Ref. No. 11 or 12) to the bottom of each upright by

pressing it into place. Note the differences at right between a foot

for an “L” upright and a foot for a “T” upright.

4. Lean one “L” upright against

a wall, and temporarily place

one shelf support (Ref. No. 3)

at approximately eye

level to properly space the

uprights. Make sure both

rivets on the shelf support are

fully inserted into the keyhole

slots, and are rmly seated

at the bottom of the keyhole

as shown in step 5.

5. To rmly seat shelf supports and backstops, make sure both

rivets are fully inserted in the keyhole slots, and rmly seated in

the bottom of the slot. A rubber mallet can be helpful in

accomplishing this.

6. Hold a second “L” upright

(or a “T” upright if you

are assembling multiple

units) approximately 36”

away. Pull the rst

upright away from the

wall using the shelf support

you attached in step 4, and

insert the other end of the

shelf support into the

second upright.

NOTE: Take care not to

let the uprights fall,

as they are not

stable until this step

is completed.

7. Place a shelf support at the rear of the unit in the bottom keyhole

slots, in the same way you placed the shelf support in steps 4

through 6. Then, place a second shelf support at bottom front of

unit.

Closed “L” Upright Closed “T” Upright

Down

“L” Upright “T” Upright

⁭

Properly Seated Not Seated

8. Place a shelf reinforcement (Ref. No. 8) across the two shelf supports.

The slot in each end of the shelf reinforcement should t over the

ridge of the shelf support.

9. Attach one center stop (Ref. No. 4) to one of the slotted shelves (Ref.

No. 5) by aligning the three holes in the center stop

ange with the holes in the center of

the shelf. Attach with three

10-24 x ” bolts

and nuts

(Ref. Nos. 9 & 10).

13. Insert shelf dividers (Ref. No. 7) by placing dividers into slots on

shelf and then hooking into the slot in the back stop. You have

been provided with enough dividers for ten per shelf level (ve

on each side of the shelf), but these can be placed in whatever

position most suits your needs.

14. If you are assembling only a single unit, assembly is now complete

(shown below left). If you are assembling multiple units joined

together, your starter unit should have been assembled with a “T”

upright (shown below right), as described in step 1. Continue with

step 15.

15. Repeat steps 4 through 13, adding the shelf supports to the “T”

upright already in place on the unit.

NOTE: The plain shelf

(without slots) is for the

unit top.

10. Place the shelf, with the

center stop attached,

onto the unit by lowering it

over the top of the shelf

supports. The edges

of the shelf should t over

the top of the shelf

supports, hiding them

from view.

11. Continue the assembly

by placing supports, shelves,

reinforcements and center

stops as described in steps

7 through 10. The

recommended spacing

between shelves is twelve

inches, which equals six open

keyhole slots between

supports. If necessary, move

the temporarily places

reinforcement from step 6.

12. The top shelf supports and top shelf (Ref. No. 6) should be installed

ush with the upright top. Note that the top shelf has no divider slots.

No shelf reinforcements are needed under top shelf.

⁭

Completed Single Unit Completed Unit Ready for Add-on

NOTE: 48” wide

units will use two

shelf reinforcements

per shelf level,

equally spaced.

⁭

REPLACEMENT PARTS

Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.

However, should your unit contain missing or damaged parts, please contact your purchase location.

DESCRIPTION

36W x 24D x 76H

PART NO.

6 Openings

QUANTITY

49B216

48W x 24D x 88H

7 Openings

QUANTITY

Starter Add-On Starter Add-On

2476PC 2476AC 248848PC 248848AC

Closed “L” Upright OR

Closed “L” Upright

Closed “T” Upright OR

Closed “T” Upright

Shelf Support OR

Shelf Support

Center Stop OR

Center Stop

Slotted Shelf OR

Slotted Shelf

Plain Shelf OR

Plain Shelf

Divider

Shelf Reinforcement

Shelf Reinforcement OR

10-24 x ½” Bolt w

10-24 x ½” Hex Nut w

Plastic Foot for “L” Upright

Plastic Foot for “T” Upright

2476LC

2488LC

3076LC

3088LC

2476TC

2488TC

3076TC

3088TC

TS-3614

TS-4811

CS-36

CS-48

TQD2-3624

TQD2-4824

TQD2-3630

TQD2-4830

T2-3624

T2-4824

T2-3630

T2-4830

FD-1108

TR-24

TR-30

LTNF-L

LTNF-T

Plain Shelf

(Ref No. 6)

Shelf Support

(Ref No. 3)

Shelf Reinforcement

(Ref No. 8)

⁭

Center Stop

(Ref No. 4)

Plastic Foot

for “L” Upright

(Ref No. 11)

Plastic Foot

for “T” Upright

(Ref No. 12)

Slotted Shelf

(Ref No. 5)

⁭

Closed “T”

Upright

(Ref No. 2)

Closed “L”

Upright

(Ref No. 1)

Divider

(Ref No. 7)

REF.

NO.

48W x 24D x 76H

6 Openings

QUANTITY

Starter Add-On

247648PC 247648AC

36W x 24D x 88H

7 Openings

QUANTITY

Starter Add-On

2488PC 2488AC

**Available Locally

⁭

w Not Shown

36W x 30D x 76H

6 Openings

QUANTITY

Starter Add-On

3076PC 3076AC

36W x 30D x 88H

7 Openings

QUANTITY

Starter Add-On

3088PC 3088AC

Dieses Handbuch passt für folgende Modelle

Andere Tennsco Inneneinrichtung Handbücher

Tennsco

Tennsco CC-30 Bedienungsanleitung

Tennsco

Tennsco Imperial Shelving 3630 Bedienungsanleitung

Tennsco

Tennsco Z-Line Bedienungsanleitung

Tennsco

Tennsco J1878A-N-W Bedienungsanleitung

Tennsco

Tennsco 7114 Bedienungsanleitung

Tennsco

Tennsco DWR-6618 Bedienungsanleitung

Tennsco

Tennsco J1878A-N Bedienungsanleitung

Tennsco

Tennsco 7818 Bedienungsanleitung

Tennsco

Tennsco J2478A-N-W Bedienungsanleitung

Tennsco

Tennsco J2478C Bedienungsanleitung

Tennsco

Tennsco FB-12 Bedienungsanleitung

Tennsco

Tennsco Capstone Shelving Units Bedienungsanleitung

Tennsco

Tennsco Sliding Door Jumbo Storage Cabinet JSD2478SU Bedienungsanleitung

Tennsco

Tennsco 1436 Bedienungsanleitung

Tennsco

Tennsco ZA7-4824S-4D Bedienungsanleitung

Tennsco

Tennsco Imperial Shelving Bedienungsanleitung

Tennsco

Tennsco 1471 Bedienungsanleitung

Tennsco

Tennsco 1480 Bedienungsanleitung

Tennsco

Tennsco 1872 Bedienungsanleitung

Tennsco

Tennsco 1472 Bedienungsanleitung

Tennsco

Tennsco B-8400 Bedienungsanleitung

Tennsco

Tennsco Enclosed Foreman’s Desk Bedienungsanleitung

Tennsco

Tennsco ZL7 Series Bedienungsanleitung

Tennsco

Tennsco J2478A-N Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung