Tennsco 1842 Bedienungsanleitung

GENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.

For safety, wear a pair of work gloves when assembling or performing any maintenance on products.

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply

in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons not authorized by Seller, where goods are damaged during

shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND SHALL IN NO

EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the

goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty

and are returned within the warranty period stated above.

PK-2570918

ASSEMBLY INSTRUCTIONS & PARTS MANUAL

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE

Deluxe Storage Cabinet

Unassembled Models 1842 & 2442

Tennsco LLC., Dickson, TN 37056-1888 • (866) 446-8686

LOAD CAPACITIES PER SHELF LEVEL

36w x 18d

36w x 24d

200 lbs.

UNIT SIZE WEIGHT CAPACITY

EVENLY DISTRIBUTED

ASSEMBLY OF 1842 OR 2442 CABINET

Tools Needed: A free 11/32” nut driver is included with each Tennsco cabinet.

Two people are recommended for assembly. Approximate assembly time: 20-30 minutes.

2. Place the cabinet back (Ref. No. 1) on a protected surface

to prevent scratching the paint. The ange on the bottom of

the back should be facing upward.

1. The reference numbers used throughout this sheet refer to

the illustration on the back cover. This is to help you to

identify the various parts as they are mentioned.

3. Attach the left side (Ref. No. 2) to the back by placing

ange (A) around the back and bolting the back and side

together with four bolts and nuts (Ref. Nos. 15 & 16). Be

sure that the lances on all shelf adjustment strips (B) point in

the same direction.

5. Insert one shelf (Ref. No. 4) into the approximate center

of the unit, inserting the shelf edges into the lances on all

four shelf adjustment strips. Be sure that the channeled

edge of the shelf is toward the cabinet front.

6. Place the second shelf at the desired level in the

same manner as in step 5. Next, attach the door frame

assembly (Ref. No. 6) to the cabinet body by placing

it over the sides. Align the weld studs with the slots in the

left and right sides, and attach using four nuts on each side.

4. Attach the right side (Ref. No. 3) to the back in the same

manner as in step 3, again making sure that the ange

is around the back and that

the lances on the shelf

adjustment strips

are pointed in

the same

direction as

those on the

back and

left side.

All lances point UP on

the back and side.

⁭

Flange faces upward.

⁭

Flange goes

under back.

⁭

Channeled edge of the shelf is

toward the front of the unit.

⁭

1. Place the locking handle

(Ref. No. 9) on the right

hand door and fasten with

two #8-32 X 1/4 hex-head

bolts and lock washers,

provided with the handle.

2. Turn the handle to the

open position and

place the locking cam

(Ref. No. 10) over the

square shank of the

door handle. The latch

must be facing downward

as shown. Then place the

locking cotter pin (Ref. No.

12) through the hole of the

square shank.

3. With the handle still in the open position, hook the

locking bars (Ref. No. 8) to the locking cam (see

“A” at left). Once in position, slowly rotate the door

handle to the closed position so the lock bars

prot rude from the holes at the top and bottom

of the door (shown at right, below).

4. Slide the nylon lock bar

guide inserts (Ref. No.

11) over the lock bar

ends and through the

door slots (see “B” at

right). Push down rmly

until the guides snap

into place.

5. Attach the “dummy” handle

(Ref. No. 13) using two

#8-32 X 1/4 hex-head bolts

and lock washers.

Handle/Locking System Installation

7. Set the unit upright and attach the top (Ref. No. 5) by inserting

the weld-studs into the holes provided on the left and right

sides. The ange should t over the outside of the rear of the

cabinet, and theoffset should be toward the front. Bolt

together by attaching nuts to the weld studs and inserting

bolts and nuts through the holes along the back edge.

8. Open the doors and place the bottom (Ref. No. 4) in the

lowest notch of the shelf adjusting strips on the sides and

back. The ange with the two holes nust face the front,

and t over the base plate of the frame. Shelves may now

be adjusted as desired.

⁭

9. Cabinet must be level for doors to

open and close properly. Insert a

athead screwdriver into the two

leveling holes and turn the screws

until the cabinet is level.

⁭

⁭⁭

⁭

REPLACEMENT PARTS

⁭

Tennsco Nut Driver

(Ref No. 14)

Bottom

(Ref No. 7)

Dummy Handle

(Ref No. 13)

Left Side

(Ref No. 2)

Top

(Ref No. 5)

Right Side

(Ref No. 3)

Cotter Pin

(Ref No. 12)

Locking Bar Guide

Nylon Insert

(Ref No. 11)

Locking Bar Set

(Ref No. 8)

Locking Cam

(Ref No. 10)

Locking Handle

with Keys

(Ref No. 9)

Back Panel

(Ref No. 1)

REF. NO. DESCRIPTION

1 Back Panel 1 2442BA 1 2442BA

2 Left Side 1 1842LS 1 2442LS

3 Right Side 1 1842RS 1 2442RS

4 Shelf 2 301 2 302

5 Top 1 043TO 1 044TO

6 Door & Frame Assembly 1 2442FA 1 2442FA

7 Bottom 1 043BO 1 044BO

8 Locking Bar Set 1 978LB 1 978LB

9 Locking Handle w/keys & hardware 1 043LH 1 043LH

10 Locking Cam* 1 944LC 1 944LC

11 Locking Bar Guide Insert (Nylon)* 2 944GI 2 944GI

12 Cotter Pin* 1 CTRPN 1 CTRPN

13 Dummy Handle* 1 043DH 1 043DH

14 Tennsco Nut Driver 1 TOOL-2 1 TOOL-2

15 #8-32 x 3/8” bolts (not shown above) 15 ** 15 **

16 #8-32 nuts (not shown above) 31 ** 31 **

*Included in Ref. No. 9, locking handle with keys and hardware (Part No. 043LH). **Available Locally

QTY. PART NO.

⁭

Door & Frame

Assembly

(Ref No. 6)

NOTE: Additional hardware may be included for replacement purposes.

QTY. PART NO.

1842 (18”d Cabinet) 2442 (24”d Cabinet)

Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.

However, should your unit contain missing or damaged parts, please contact your purchase location.

Shelf

(Ref No. 4)

⁭

49B257

Dieses Handbuch passt für folgende Modelle

Andere Tennsco Inneneinrichtung Handbücher

Tennsco

Tennsco CC-30 Bedienungsanleitung

Tennsco

Tennsco EB-12 Bedienungsanleitung

Tennsco

Tennsco 1470RH Bedienungsanleitung

Tennsco

Tennsco 3018 Bedienungsanleitung

Tennsco

Tennsco Standard Combination Cabinet CVD7214 Bedienungsanleitung

Tennsco

Tennsco J1878A-N-W Bedienungsanleitung

Tennsco

Tennsco 7114 Bedienungsanleitung

Tennsco

Tennsco Z-Line Steel Shelf Unit Bedienungsanleitung

Tennsco

Tennsco Imperial Shelving Bedienungsanleitung

Tennsco

Tennsco J1878C-N Bedienungsanleitung

Tennsco

Tennsco RGL-1236S Bedienungsanleitung

Tennsco

Tennsco B-6000 Bedienungsanleitung

Tennsco

Tennsco 1442 Bedienungsanleitung

Tennsco

Tennsco ZL7 Series Bedienungsanleitung

Tennsco

Tennsco Z-Line Bedienungsanleitung

Tennsco

Tennsco Jumbo Storage Cabinet J2478SU Bedienungsanleitung

Tennsco

Tennsco 1480 Bedienungsanleitung

Tennsco

Tennsco 7218 Bedienungsanleitung

Tennsco

Tennsco 7224 Bedienungsanleitung

Tennsco

Tennsco 2476 Series Bedienungsanleitung

Tennsco

Tennsco 1471 Bedienungsanleitung

Tennsco

Tennsco Capstone Shelving Units Bedienungsanleitung

Tennsco

Tennsco APT-3672S Bedienungsanleitung

Tennsco

Tennsco J2478C Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung