Terex Genie GTH1056 Bedienungsanleitung

Operator's Manual

Serial Number Range

GTH

105

from GTH1012

16292

with

Maintenance

Information

Fourth Edition

Fourth Printing

Part No. 214834

Operator's Manual Fourth Edition • Fourth Printing

GTH-1056 Part No. 214834

Front Matter

Contents

Introduction ........................................................... 1

Symbol and Hazard Pictorials Definitions............. 5

General Safety ...................................................... 7

Work Area Safety................................................ 11

Legend ................................................................ 17

Controls............................................................... 18

Inspections.......................................................... 22

Operating Instructions......................................... 34

Transport Instructions ......................................... 44

Maintenance ....................................................... 46

Attachments ........................................................ 50

Specifications...................................................... 61

Load Charts ........................................................ 62

Fourth Edition: Fourth Printing, August 2013

Genie is a registered trademark of Terex South Dakota, Inc. in

the U.S.A. and many other countries. “GTH” is a trademark of

Terex South Dakota, Inc.

Fourth Edition • Fourth Printing Operator's Manual

Introduction

Part No. 214834 GTH-1056 1

Introducti on

About this manual

Genie appreciates your choice of our machine for

your application. Our number one priority is user

safety, which is best achieved by our joint efforts.

This book is an operation and daily maintenance

manual for the user or operator of a Genie

machine.

This manual should be considered a permanent

part of your machine and should remain with the

machine at all times. If you have any questions,

contact Genie.

Product Indentification

The machine serial number is located on the serial

label.

Intended Use

A variable reach rough terrain forklift truck is

defined as a wheeled type truck with a pivoting

boom, which may be equipped with various

attachments for picking, transporting and placing

loads with the established load range charts.

Bulletin Distribution and

Compliance

Safety of product users is of paramount

importance to Genie. Various bulletins are used by

Genie to communicate important safety and

product information to dealers and machine

owners.

The information contained in the bulletins is tied to

specific machines using the machine model and

serial number.

Distribution of bulletins is based on the most

current owner on record along with their

associated dealer, so it is important to register your

machine and keep your contact information up to

date.

To ensure safety of personnel and the reliable

continued operation of your machine, be sure to

comply with the action indicated in a respective

bulletin.

Operator's Manual Fourth Edition • Fourth Printing

Introduction

2 GTH-1056 Part No. 214834

Contacting the Manufacturer

At times it may be necessary to contact Genie.

When you do, be ready to supply the model

number and serial number of your machine, along

with your name and contact information. At

minimum, Genie should be contacted for:

Accident reporting

Questions regarding product applications and

safety

Standards and regulatory compliance information

Current owner updates, such as changes in

machine ownership or changes in your contact

information. See Transfer of Ownership, below.

Transfer of Machine Ownership

Taking a few minutes to update owner information

will ensure that you receive important safety,

maintenance and operating information that

applies to your machine.

Please register your machine by visiting us on the

web at www.genielift.com or by calling us toll free

at 1-800-536-1800.

Fourth Edition • Fourth Printing Operator's Manual

Introduction

Part No. 214834 GTH-1056 3

Danger

Failure to obey the instructions and

safety rules in this manual will result

in death or serious injury.

Do Not Operate Unless:

You learn and practice the principles of safe

machine operation contained in this operator’s

manual.

1 Avoid hazardous situations.

Know and understand the safety rules

before going on to the next section.

2 Always perform a pre-operation inspection.

3 Always perform function tests prior to use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

You read, understand and obey the

manufacturer’s instructions and safety

rules—safety and operator’s manuals and

machine decals.

You read, understand and obey employer’s

safety rules and worksite regulations.

You read, understand and obey all applicable

governmental regulations.

You are properly trained to safely operate the

machine.

Operator's Manual Fourth Edition • Fourth Printing

Introduction

4 GTH-1056 Part No. 214834

Hazard Classification

Decals on this machine use symbols, color coding

and signal words to identify the following:

Safety alert symbol—used to alert

you to potential personal injury

hazards. Obey all safety

messages that follow this symbol

to avoid possible injury or death.

Indicates a hazardous situation

which, if not avoided, will result in

death or serious injury.

Indicates a hazardous situation

which, if not avoided, could result

in death or serious injury.

Indicates a hazardous situation

which, if not avoided, could result

in minor or moderate injury.

Indicates a property damage

message.

Standards

Many aspects of rough terrain forklift operation and

testing are discussed in standards published by

the American National Standards Institute and the

Industrial Truck Standards Development

Foundation. These standards are updated on a

regular basis with addenda. It is recommended

that you purchase and refer to the following

standards.

ANSI/ITSDF B56.6 - Rough Terrain Forklift Trucks

The ANSI standard can be downloaded from

www.ITSDF.org

CSA B335 - Safety Standard for Lift Trucks

The CSA standard can be downloaded from

www.csa.ca

Safety Sign Maintenance

Replace any missing or damaged safety signs.

Keep operator safety in mind at all times. Use mild

soap and water to clean safety signs. Do not use

solvent-based cleaners because they may damage

the safety sign material.

DANGER

WARNING

CAUTION

NOTICE

Fourth Edition • Fourth Printing Operator's Manual

Symbol and Hazard Pictorials Definitions

Part No. 214834 GTH-1056 5

Symbol and Hazard P ictorials Definiti ons

Electrocution hazard Maintain required

clearance

Crush hazard No people under load Read the operator’s

manual

Crush hazard Keep clear of moving

stabilizers

Maintain required

clearance

Crush hazard Always wear seat

belt

Injection hazard Use a piece of

cardboard or paper

to search for leaks

Crush hazard Keep away from

moving parts

Crush hazard

Keep away from

moving parts

Burn hazard Do not loosen cap

until cool.

Explosion / Burn

hazard

No smoking. No open

flame.

Burn hazard Allow surfaces to

cool

Crush hazard Keep away from

moving parts

Overturning hazard

Operator's Manual Fourth Edition • Fourth Printing

Symbol and Hazard Pictorials Definitions

6 GTH-1056 Part No. 214834

Only trained

maintenance

personnel should

access

compartments

Explosion / Burn

hazard

No smoking. No open

flame.

Fall hazard Work platform use

Tip-over hazard Tip-over hazard Sway operation Keep load low Refer to load charts

and manual.

Fourth Edition • Fourth Printing Operator's Manual

General Safety

Part No. 214834 GTH-1056 7

General Safety

Operator's Manual Fourth Edition • Fourth Printing

General Safety

8 GTH-1056 Part No. 214834

Andere Handbücher für Genie GTH1056

Inhaltsverzeichnis

Andere Terex Baumaschinen Handbücher

Terex

Terex RL4000 Bedienungsanleitung

Terex

Terex Bid-Well 4800 Bedienungsanleitung

Terex

Terex Franna AT-15 Bedienungsanleitung

Terex

Terex TA9P Tier 4 Final Bedienungsanleitung

Terex

Terex TV800 Handbuch

Terex

Terex CBR 24 PLUS Bedienungsanleitung

Terex

Terex MAC 25 Bedienungsanleitung

Terex

Terex BID-WELL 2450 Bedienungsanleitung

Terex

Terex 3B6 Programmierhandbuch

Terex

Terex RT500-1 Bedienungsanleitung

Terex

Terex MHL360 E Bedienungsanleitung

Terex

Terex Genie GTH-1544 Bedienungsanleitung

Terex

Terex RL4000 Bedienungsanleitung

Terex

Terex Genie SX-135 XC Bedienungsanleitung

Terex

Terex SK315 Montageanleitung

Terex

Terex HC60 Montageanleitung

Terex

Terex CBR 40H-4 Bedienungs- und Wartungshandbuch

Terex

Terex TL48 Bedienungsanleitung

Terex

Terex Optima TC Bedienungsanleitung

Terex

Terex TM Series Bedienungsanleitung

Terex

Terex HI-RANGER TM Series Bedienungsanleitung

Terex

Terex GTH10E-12500 Installations- und Betriebsanleitung

Terex

Terex Fuchs MHL380 D Bedienungsanleitung

Terex

Terex RT200-1 Bedienungsanleitung

Beliebte Baumaschinen Handbücher anderer Marken

SASFORKS

SASFORKS EXTREME Bedienungsanleitung

Hailo

Hailo H-50 Bedienungsanleitung

Graco

Graco LineLazer ES 1000 Gebrauchs- und Pflegehandbuch

Greenlee

Greenlee 555RSC Bedienungsanleitung

Manitowoc

Manitowoc Grove CD3340B Bedienungsanleitung

Lux Tools

Lux Tools A-FMR-20 Set Bedienungsanleitung

SIP

SIP 03683 Bedienungsanleitung

Volvo

Volvo L30G Bedienungsanleitung

Grizzly

Grizzly G8712 Bedienungsanleitung

Modulift

Modulift CMOD 12 Bedienungsanleitung

Case

Case DV201 Bedienungsanleitung

Sealey

Sealey SC10.V2 Bedienungsanleitung

Wacker Neuson

Wacker Neuson DT05 Bedienungsanleitung

HYVA

HYVA AMCO VEBA 81 Series Bedienungsanleitung

Atlas Copco

Atlas Copco Dynapac V5100TV Bedienungsanleitung

Toro

Toro 323 Bedienungsanleitung

Manitowoc

Manitowoc National Crane 1400A Bedienungsanleitung

SGS

SGS EC1500 Bedienungsanleitung