Terex SK315 Montageanleitung

Slow Control Functions

Personal Observation

Multimeter

Basic Hand Tools

SK315 / SK405 / SK415 / SK565 / SK575

Necessary Tools:

Type of Tip:

Applicable Models:

TECHNICAL TIPS

CRANES

Basic Safety Rules

Danger

Failure to follow the instructions and safety rules in the Operator's Manual and

Service Manual appropriate to your machine will result in death or serious

injury. Many of the risks identified in the operator's manual are also safety

risks when maintenance and repair procedures are performed.

Do not perform maintenance unless:

➢You are trained and qualified to perform maintenance on this machine.

➢You read, understand and obey:

oThe manufacturer's instructions and safety rules

oEmployer safety rules and workplace regulations

oApplicable government regulations

oYou have the appropriate tools, lifting equipment and a suitable location.

The information contained in this technical tip is a supplement to the service

manual. Consult the appropriate service manual for your machine for safety

rules and risks.

TECHNICAL TIPS

CRANES

If you have any doubts about how to perform any procedure, please contact our Technical Support team through our Web Portal

www.myterexcranes.com and access our Livechat.

Proximity Switch Failure Message on Display

•There are two ways in which the operator will receive this error message.

•The first is with a long jib configuration swinging in first step into the wind.

The crane doesn’t gain momentum within the time period set in the

PLC parameters (2 seconds) that is expects to see the signal from the

proximity switch.

TECHNICAL TIPS

CRANES

If you have any doubts about how to perform any procedure, please contact our Technical Support team through our Web Portal

www.myterexcranes.com and access our Livechat.

Other Possible Causes

•The second is the proximity switch is out of adjustment, has grease on

the face of the switch or has a broken or damaged cable.

The PLC fails to receive a signal from the proximity switch at input E10.8.

As the crane swings, this input will flasn ON and OFF as the proximity

switch passes the gear teeth of the swing bearing exterior race.

TECHNICAL TIPS

CRANES

If you have any doubts about how to perform any procedure, please contact our Technical Support team through our Web Portal

www.myterexcranes.com and access our Livechat.

Dieses Handbuch passt für folgende Modelle

4

Inhaltsverzeichnis

Andere Terex Baumaschinen Handbücher

Terex

Terex RT500-1 Bedienungsanleitung

Terex

Terex HI-RANGER TM Series Bedienungsanleitung

Terex

Terex HC60 Montageanleitung

Terex

Terex Franna AT-15 Bedienungsanleitung

Terex

Terex RT200-1 Bedienungsanleitung

Terex

Terex Genie GTH-1544 Bedienungsanleitung

Terex

Terex RL4000 Bedienungsanleitung

Terex

Terex CBR 24 PLUS Bedienungsanleitung

Terex

Terex TM Series Bedienungsanleitung

Terex

Terex AL4L Einrichtungshandbuch

Terex

Terex Genie GTH-5519 Bedienungsanleitung

Terex

Terex CRC1150S Bedienungsanleitung

Terex

Terex Bid-Well 4800 Bedienungsanleitung

Terex

Terex RL4000 Bedienungsanleitung

Terex

Terex Optima TC Bedienungsanleitung

Terex

Terex TV800 Handbuch

Terex

Terex TL48 Bedienungsanleitung

Terex

Terex RL4000 Bedienungsanleitung

Terex

Terex GTH10E-12500 Installations- und Betriebsanleitung

Terex

Terex RT700 Bedienungsanleitung

Terex

Terex BID-WELL 2450 Bedienungsanleitung

Terex

Terex MAC 25 Bedienungsanleitung

Terex

Terex MHL360 E Bedienungsanleitung

Terex

Terex TA9 Handbuch

Beliebte Baumaschinen Handbücher anderer Marken

SASFORKS

SASFORKS EXTREME Bedienungsanleitung

Hailo

Hailo H-50 Bedienungsanleitung

Graco

Graco LineLazer ES 1000 Gebrauchs- und Pflegehandbuch

Greenlee

Greenlee 555RSC Bedienungsanleitung

Manitowoc

Manitowoc Grove CD3340B Bedienungsanleitung

Lux Tools

Lux Tools A-FMR-20 Set Bedienungsanleitung

SIP

SIP 03683 Bedienungsanleitung

Volvo

Volvo L30G Bedienungsanleitung

Grizzly

Grizzly G8712 Bedienungsanleitung

Modulift

Modulift CMOD 12 Bedienungsanleitung

Case

Case DV201 Bedienungsanleitung

Sealey

Sealey SC10.V2 Bedienungsanleitung

Wacker Neuson

Wacker Neuson DT05 Bedienungsanleitung

HYVA

HYVA AMCO VEBA 81 Series Bedienungsanleitung

Atlas Copco

Atlas Copco Dynapac V5100TV Bedienungsanleitung

Toro

Toro 323 Bedienungsanleitung

Manitowoc

Manitowoc National Crane 1400A Bedienungsanleitung

SGS

SGS EC1500 Bedienungsanleitung