TerraTec Cameo 200 RT Bedienungsanleitung

English Manual

Version 08.10.03

CE - Statement

We:

TerraTec Electronic GmbH · Herrenpfad 38 · D-41334 Nettetal

hereby declare that the product:

VideoSystem Cameo 200 RT

to which this declaration refers complies with the following standards or standardizing documents:

1. EN 50081-1

2. EN 50082-1

The following are the stipulated operating and environmental conditions for the said compliance:

Residential, business and commercial environments and small-company environments.

This declaration is based on:

test report (s) of the EMC testing laboratory

The information in this document is subject to change without notice and shall not be deemed as a warranty by the

seller. No warranties, express or implied, are made with regard to the quality, suitability or accuracy of this

document. The manufacturer reserves the right to change the contents of this document and/or the associated

products at any time without the provision of prior notice to specific persons or organizations. The manufacturer

shall not be held liable for damages of any kind arising from the use, or the inability to use this product or its

documentation, even if the possibility of such damage is known. The information in this document is subject to

purpose without the express written permission of the copyright holders. Product and brand names contained in

this document are used for identification purposes only. All registered trademarks, product designations or brand

names used in this document are the registered property of their respective owners.

2 VideoSystem Cameo 200 RT (English)

Contents

Preface ....................................................................................................................................4

Installation ..............................................................................................................................5

The card's layout ..................................................................................................................5

Installing the Cameo 200 RT – PCI card ................................................................................7

Installation and connection of the Cameo Connect.............................................................. 9

Connection of a DV – Camcorder ........................................................................................ 11

Connection of additional FireWire™-components .............................................................. 11

Installation of drivers............................................................................................................. 12

Installation using Windows 98 SE....................................................................................... 13

Installation using Windows ME...........................................................................................16

Installation using Windows 2000 or XP...............................................................................18

Software installation..............................................................................................................19

Installation of DirectX 9 ......................................................................................................19

Installation of Ulead DVD VideoStudio 7 SE and MovieFactory 2 SE ...................................19

Installation of Prodad Adorage Magic.................................................................................19

Record Videos in DVD - Format. ......................................................................................... 20

Appendix ............................................................................................................................... 21

You're not alone ... .............................................................................................................21

TerraTec service..................................................................................................................23

VideoSystem Cameo 200 RT (English) 3

Glossary .............................................................................................................................25

Preface

Thank you for purchasing a product made by TerraTec. You have made a good choice, as the

Cameo 200 RT is an impressive piece of "State of the art" technology. This product is one of

the most efficient computer devices for video applications. We are convinced, that the Cameo

200 RT will serve you well and you will have a lot of fun, whenever you are using it.

4 VideoSystem Cameo 200 RT (English)

Installation

The card's layout

The external IEEE-1394-connectors

These connectors allow you to connect the Cameo 200 RT to the rest of the world, e.g. to your

camcorder.

The internal IEEE-1394-connector

VideoSystem Cameo 200 RT (English) 5

The internal connector of your Cameo 200 RT is intended to connect the 5,25" front panel

"Cameo Connect".

The internal power supply

If you wish to connect further IEEE-1394 components, which need to receive their power

supply via the Cameo 200 RT, you should connect your computer's power supply directly to

the Cameo 200 RT. This way, the power is provided by the power supply, so that the main

board, which otherwise conducts the current, will not be overloaded.

Please be careful, when connecting the power adapter to your Cameo

200 RT, as an incorrect connection may damage the product and

other components of your system. For more information, please refer

to page 8.

6 VideoSystem Cameo 200 RT (English)

Installing the Cameo 200 RT – PCI card

Before installing the Cameo 200 RT into your computer, please pay attention to special

features of your computer's configuration. Read the instruction manuals of your computer and

other additional cards for information about settings.

If you follow the instructions, the installation should be easy.

If you are experiencing any problems, please carefully read the corresponding sections in the

manual once again.

First, check if the package is complete.

Minimum contents of package:

1 Cameo DV, PCI-IEEE1394 Controller

1 Cameo Connect, 5¼” Front module (additional 4 spare front screen in 4 colors )

1 Installation CDs

1 IEEE1394 connection cable 6 Pin to 4Pin for connection to your camcorder

1 IEEE1394 connection cable 6 Pin to 6Pin for connecting the Cameo 200 RT to the Cameo

Connect

1 Registration card with serial number

1 Instruction manual

VideoSystem Cameo 200 RT (English) 7

Send in your registration card as soon as possible or get registered via the internet on

http://www.terratec.net/register.htm.. This is important for support and

hotline.

Safety note:

Disconnect the power cord from your computer´s power supply and

the electrical socket before opening the enclosure!

And now... step by step:

Shut down your computer and all connected peripheral components, like printer and

monitor. Ensure the power is switched off at the mains supply socket. Leave the power

cord connected first, so that your computer is earthed.

Touch the metal plate on the rear side of your computer to ground yourself and discharge

any static electricity. Remove the power cord.

Remove the cover of your computer.

Look for a free PCI expansion slot, remove the screw that holds the slot's bracket and

remove the bracket. To guarantee the best operation of your Cameo 200 RT, choose a slot

that is not next to a card already installed.

Unpack the Cameo 200 RT – PCI card carefully. Only touch the card's edges, while the

other hand should rest on the metal surface of your computer, ensuring that the

electrostatic discharge flows into the computer without damaging the card. Never touch

the components on the card´s surface.

Adjust the bracket of the Cameo 200 RT to the slot, so that the card's PCI connector

exactly fits to the socket of the slot.

Apply the card to the slot. You may have to use a little force to make sure that it is

connected correctly.

8 VideoSystem Cameo 200 RT (English)

Now attach the Cameo 200 RT with the screw of the PCI slot's bracket.

Installation and connection of the Cameo Connect

For installing the Cameo Connect, remove one of the 5,25" front blanking brackets of your

computer's enclosure (A). Existing shielding sheet metal in the expansion slot must also be

removed. Push the Cameo Connect module into the free slot (B).

Attach the front module to the computer's enclosure, using the supplied screws.

Connect the internal FireWire™-connector of your Cameo DV PCI-card to the connector of the

Cameo Connect front module as shown in the illustration below, using the supplied (short)

FireWire™-cable.

VideoSystem Cameo 200 RT (English) 9

If you wish to connect external components, that do not have an independent power supply,

we recommend you connect the computer's power supply to the Cameo Connect. 1. Plug in a

power connector of the computer's power supply to the female connector of the supplied Y-

cable (see Illustration), 2. Connect the small connector of the Y-cable to the corresponding

connector of the Cameo Connect front module.

PC power supply connector Y-cable

 

.........................................................................................................................Cameo Connect

Re-install the cover.·

· Re-connect the power cord and all other cables and restart your computer.

The power connector MUST be connected correctly to the Cameo

Connect front module, otherwise the module and other components

of your system may be damaged.

10 VideoSystem Cameo 200 RT (English)

Inhaltsverzeichnis

Andere TerraTec PCI-Karte Handbücher

TerraTec

TerraTec AUREON 5.1 SKY Bedienungsanleitung

TerraTec

TerraTec TerraTValue BT878 Bedienungsanleitung

TerraTec

TerraTec Cinergy HT PCI Installationsanleitung

TerraTec

TerraTec Aureon 5.1 PCI Bedienungsanleitung

TerraTec

TerraTec 943204 Bedienungsanleitung

TerraTec

TerraTec Cinergy HT PCI Installationsanleitung

TerraTec

TerraTec TValue Radio Bedienungsanleitung

TerraTec

TerraTec TerraTV Radio+ Bedienungsanleitung

TerraTec

TerraTec EWS 64 XXL Bedienungsanleitung

TerraTec

TerraTec Aureon 7.1 Universe Bedienungsanleitung

TerraTec

TerraTec CINERGY 800 I PVR Installationsanleitung

TerraTec

TerraTec TerraTValue Bedienungsanleitung

TerraTec

TerraTec CAMEO 200DV Handbuch

TerraTec

TerraTec AUREON 7.1 PCI Bedienungsanleitung

TerraTec

TerraTec BASE2 PCI Bedienungsanleitung

TerraTec

TerraTec DMX 6fire LT Bedienungsanleitung

TerraTec

TerraTec XLerate Bedienungsanleitung

TerraTec

TerraTec CAMEO 200RT Handbuch

TerraTec

TerraTec AUREON 7.1 PCI Bedienungsanleitung

TerraTec

TerraTec CAMEO 400DV Handbuch

TerraTec

TerraTec Cameo 400 DV Bedienungsanleitung

TerraTec

TerraTec Cameo 600 DV Bedienungsanleitung

TerraTec

TerraTec Cinergy 200 TV Installationsanleitung

TerraTec

TerraTec AudioSystem EWS 64 S Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung