Texas Instruments TLC4541EVM Bedienungsanleitung

TLC4541/5EVM, TLC3541/5EVM,

TLC2551/2/5EVM AND

TLV2541/2/5EVM

March 2003 Data Acquisition Products

User’s Guide

SLAU103

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,

enhancements, improvements, and other changes to its products and services at any time and to discontinue

any product or service without notice. Customers should obtain the latest relevant information before placing

orders and should verify that such information is current and complete. All products are sold subject to TI’s terms

and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in

accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI

deems necessary to support this warranty. Except where mandated by government requirements, testing of all

parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for

their products and applications using TI components. To minimize the risks associated with customer products

and applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,

in which TI products or services are used. Information published by TI regarding third-party products or services

does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.

Use of such information may require a license from a third party under the patents or other intellectual property

of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without

alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction

of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for

such altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that

product or service voids all express and any implied warranties for the associated TI product or service and

is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

EVM IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

This evaluation kit being sold by TI is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION

PURPOSES ONLY and is not considered by TI to be fit for commercial use. As such, the goods being provided

may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective

considerations, including product safety measures typically found in the end product incorporating the goods.

As a prototype, this product does not fall within the scope of the European Union directive on electromagnetic

compatibility and therefore may not meet the technical requirements of the directive.

Should this evaluation kit not meet the specifications indicated in the EVM User’s Guide, the kit may be returned

within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE

WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,

IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY

PARTICULAR PURPOSE.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user

indemnifies TI from all claims arising from the handling or use of the goods. Please be aware that the products

received may not be regulatory compliant or agency certified (FCC, UL, CE, etc.). Due to the open construction

of the product, it is the user’s responsibility to take any and all appropriate precautions with regard to electrostatic

discharge.

EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE

TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not

exclusive.

TI assumesno liability for applications assistance, customer product design, software performance, or

infringement of patents or services described herein.

Please read the EVM User’s Guide and, specifically, the EVM Warnings and Restrictions notice in the EVM

User’s Guide prior to handling the product. This notice contains important safety information about temperatures

and voltages. For further safety concerns, please contact the TI application engineer.

Persons handling the product must have electronics training and observe good laboratory practice standards.

No license is granted under any patent right or other intellectual property right of TI covering or relating to any

machine, process, or combination in which such TI products or services might be or are used.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

EVM WARNINGS AND RESTRICTIONS

It is important to operate this EVM within the input voltage range of 12 V and the output

voltage range of 0 V and +5 V.

Exceeding the specified input range may cause unexpected operation and/or irreversible

damage to the EVM. If there are questions concerning the input range, please contact a TI

field representative prior to connecting the input power.

Applying loads outside of the specified output range may result in unintended operation and/or

possible permanent damage to the EVM. Please consult the EVM User’s Guide prior to

connecting any load to the EVM output. If there is uncertainty as to the load specification,

please contact a TI field representative.

During normal operation, some circuit components may have case temperatures greater than

70°C. The EVM is designed to operate properly with certain components above 70°C as long

as the input and output ranges are maintained. These components include but are not limited

to linear regulators, switching transistors, pass transistors, and current sense resistors. These

types of devices can be identified using the EVM schematic located in the EVM User’s Guide.

When placing measurement probes near these devices during operation, please be aware

that these devices may be very warm to the touch.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

Related Documentation From Texas Instruments

iii

Preface

Read This First

About This Manual

This user’s guide describes the EVM used to evaluate ten different serial

analog-to-digital converters. These converters are the TLC4541/5,

TLC3541/5, TLC2551/2/5, and TLV2541/2/5; 16-bit, 14-bit, 12-bit, and 12-bit

devices respectfully. A complete circuit description as well as a schematic and

bill of materials are included.

How to Use This Manual

This document contains the following chapters:

Chapter 1 - EVM Overview

Chaper 2 - Layout

Chapter 3 - EVM Bill of Materials and EVM Schematic

Related Documentation From Texas Instruments

To obtain a copy of any of the following TI documents, call the Texas

Instruments Literature Response Center at (800) 477-8924 or the Product

Information Center (PIC) at (972) 644-5580. When ordering, please identify

this booklet by its title and literature number. Updated documents can also be

obtained through our website at WWW.TI.COM.

Data Sheets Literature Numbers

TLV2541/2/5 SLAS245

TLC2551/2/5 SLAS276

TLC3541/5 SLAS345

TLC4541/5 SLAS293

OPA132 SBOS054

REF102 SBVS003

SN74HC1G125DBV SCLS377

Contents

FCC Warning

This equipment is intended for use in a laboratory test environment only. It gen-

erates, uses, and can radiate radio frequency energy and has not been tested

for compliance with the limits of computing devices pursuant to subpart J of

part 15 of FCC rules, which are designed to provide reasonable protection

against radio frequency interference. Operation of this equipment in other en-

vironments may cause interference with radio communications, in which case

the user at his own expense will be required to take whatever measures may

be required to correct this interference.

Contents

1 EVM Overview 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 Introduction 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Features 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Default Jumper Settings 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 Analog Interface 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.5 Digital Interface 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.6 Power Supplies 1-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.7 Voltage References 1-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.8 EVM Operation 1-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Layout 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 EVM Bill of Materials and EVM Schematic 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1 EVM Bill of Materials 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2 EVM Schematic 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Figures

2-1 Top Assembly Layer 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-2 Ground Plane Layer 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-3 Voltage Plane Layer 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-4 Bottom Assembly (Viewed From Top) 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tables

1-1 Single Input Channel 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-2 Pseudo DIfferential Input Channels 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-3 Dual Input Channels 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-4 TLC4541EVM, TLC3541EVM, TLC2551EVM, and TLV2541EVM 1-3. . . . . . . . . . . . . . . . . . . .

1-5 TLC4545EVM, TLC3545EVM, TLC2552/5EVMs, and TLV2542/5EVMs 1-3. . . . . . . . . . . . . .

1-6 Analog Input Connector J1 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-7 Digital Connector J2 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-1 EVM Bill of Materials 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents

1-1

EVM Overview

This chapter provides an overview of the TLC4541/5EVM, TLC3541/5EVM,

TLC2551/2/5EVM and TLV2541/2/5EVM.

Topic Page

1.1 Introduction 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Features 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Default Jumper Settings 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 Analog Interface 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.5 Digital Interface 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.6 Power Supplies 1-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.7 Voltage References 1-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.8 EVM Operation 1-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 1

Introduction

1-2

1.1 Introduction

The series of TLC4541/5, TLC3541/5, TLC2551/2/5 and TLV2541/2/5 are

high-performance low-power, miniature, CMOS, serial analog to digital

converters (ADCs). The low power performance of these ADCs is further

enhanced by an auto-power-down mode incorporated in each series. Three

series of the devices run at a maximum sample rate of 200 Ksps and have their

own internal conversion clock. The TLC2551/2/5 series runs at 360 Ksps and

uses the external SCLK for conversion.

The EVM is designed to accommodate all of the above devices. The analog

input signal is buffered through an operational amplifier follower. The data

output (DO) signal, from the device under test (DUT), is conditioned through

a digital buffer. An on-board voltage reference is generated and buffered to

drive the DUT. An off-board reference, which is user optional, can be supplied

by reconfiguring jumper (W3). The analog electronics operates with bipolar or

unipolar power supplies, by changing two jumpers.

1.2 Features

The EVM is a full featured board designed to accommodate ten serial ADCs.

Device types and resolutions are listed in the following tables:

Table 1-1.Single Input Channel

Device Resolution

TLC4541 16 Bits

TLC3541 14 Bits

TLC2551 12 Bits

TLV2541 12 Bits

Table 1-2.Pseudo DIfferential Input Channels

Device Resolution

TLC4545 16 Bits

TLC3545 14 Bits

TLC2555 12 Bits

TLV2545 12 Bits

Table 1-3.Dual Input Channels

Device Resolution

TLC2552 12 Bits

TLV2542 12 Bits

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Texas Instruments Medienkonverter Handbücher

Texas Instruments

Texas Instruments DM365 Bedienungsanleitung

Texas Instruments

Texas Instruments PCM2704 Bedienungsanleitung

Texas Instruments

Texas Instruments UCC28610EVM-474 Bedienungsanleitung

Texas Instruments

Texas Instruments DAC1006 Bedienungsanleitung

Texas Instruments

Texas Instruments TPS54320 Bedienungsanleitung

Texas Instruments

Texas Instruments ADS79 EVM-PDK Series Bedienungsanleitung

Texas Instruments

Texas Instruments DAC63202W Bedienungsanleitung

Texas Instruments

Texas Instruments TPS40051 Bedienungsanleitung

Texas Instruments

Texas Instruments TPS6204xEVM Bedienungsanleitung

Texas Instruments

Texas Instruments EUROTEXT CF70200 Bedienungsanleitung

Texas Instruments

Texas Instruments TVP5151 Bedienungsanleitung

Texas Instruments

Texas Instruments ADS5102 EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TPS53319EVM-136 Bedienungsanleitung

Texas Instruments

Texas Instruments TPS61092 Bedienungsanleitung

Texas Instruments

Texas Instruments UCC28782EVM-030 Bedienungsanleitung

Texas Instruments

Texas Instruments UCC2891 Bedienungsanleitung

Texas Instruments

Texas Instruments TPS53513 Bedienungsanleitung

Texas Instruments

Texas Instruments LDC3114 Bedienungsanleitung

Texas Instruments

Texas Instruments ADS1230REF Bedienungsanleitung

Texas Instruments

Texas Instruments TPS549B22EVM-847 Bedienungsanleitung

Texas Instruments

Texas Instruments TPS40090EVM-002 Montage- und Bedienungsanleitung

Texas Instruments

Texas Instruments HPA070 Bedienungsanleitung

Texas Instruments

Texas Instruments DM6467 Bedienungsanleitung

Texas Instruments

Texas Instruments TPS543C20AEVM-054 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung