Topcon CT-80 Bedienungsanleitung

INSTRUCTION MANUAL

COMPUTERIZED TONOMETER

CT-80

Оборудование для

оптик,офтальмологи

ческих

кабинетов,заказы

на сайте

www euromed in ua

WARNING INDICATIONS AND POSITIONS

To ensure the safe usage of this equipment, precaution indications are provided.

Abide by the following warning instructions. If any of the following labels are missing,

please contact us at the address printed on the back cover of this manual.

WARNING

• To avoid electrical shock, do not open

the instrument. Refer all servicing to

qualified personnel.

CAUTION

• To avoid potential injury, insure that

the safety stopper knob is engaged

prior to use.

CAUTION

• To avoid potential injury during op-

eration, do not touch the patient’s

eyes or nose with the instrument.

WARNING

• To avoid electrical shock, do not open

the instrument. Refer all servicing to

qualified personnel.

WARNING

• Electrical shock may cause burns or

possible fire. Turn the main power

OFF and UNPLUG the power cord

before replacing the fuses. Replace

only with fuses of the correct rating.

Оборудование для

оптик,офтальмологических

кабинетов,заказы на сайте

www euromed in ua

COMPONENTS

MAIN BODY COMPONENTS

COMPONENTS

Measuring window cap

Measuring head

Clamping knob

Safety stopper knob

Control panel

External I/O terminal

TV Monitor

Measuring switch

Control lever

Power lamp

Fixing knob (used to

stop movements

during removal)

Power switch

Power cable

Adjusting knob

Forehead rest

Measuring window

Measuring nozzle

Height mark

Chinrest pad pin

Chinrest

Chinrest handle

Оборудование для

оптик,офтальмологических

кабинетов,заказы на сайте

www euromed in ua

CONTROL PANEL COMPONENTS

Print switch ................... Prints out the screen readings. When there is no reading, holding

the switch down feeds the paper.

Range switch ................ Switches the range between 0-30 and 0-60.

Clear switch .................. Deletes all the measurement values from the screen.

Menu switch.................. Displays the Menu screen.

Auto/Manual switch...... Switches the mode between auto and manual. Also, when se-

lecting menu software, it moves the cursor right ( ).

Air check switch ........... Performs an air check. Also, when selecting menu software, it

moves the cursor left ( ).

Down switch ................. When selecting menu software, it moves the cursor down ( ).

Up switch....................... Range switch. When selecting menu software, it moves the

cursor up ( ).

COMPONENTS

Print switch Auto/Manual switch

Clear switch

Air check switch

Down switch Range switch

Menu switch Up switch

Select switch

MONITOR SCREEN COMPONENTS

Measurement Screen (Auto mode, alignment)

Measurement Screen (Manual mode, alignment OK)

Menu Screen

COMPONENTS

Inner alignment mark

Outer alignment mark

Alignment bar

Alignment dot

Measuring range

Measurement mode

Target eye

Inner alignment mark

(alignment OK)

Outer alignment mark

Cursor

CONTENTS OF PRINTER OUTPUT

COMPONENTS

Average eye pressure

values

Time/Date display

Work ID No.

Message column

Measured eye pressure

values

ID No.

Equipment No.

Bar code

Оборудование для

оптик,офтальмологических

кабинетов,заказы на сайте

www euromed in ua

STANDARD ACCESSORIES

The following are the standard accessories. The figures in parentheses are the

quantities. Please check to see that all accessories are contained.

Power cable (1) Rail cover (2)

Printing paper (2) Chinrest pin (2)

Chinrest pad (1) Silicone cloth (1)

Fuse (2)

* Different by destinations

Dust cover (1)

Cleaning kit (1) Instruction Manual, Unpacking and Assembly

(1 each)

Window glass cleaning procedure (1)

COMPONENTS

Оборудование для

оптик,офтальмологи

ческих

кабинетов,заказы на

сайте

www euromed in ua

PREPARATIONS

HOW TO INSTALL THE INSTRUMENT

1Fasten the clamping knob.

2Hold the instrument body firmly at the specified positions and place it on the auto-

matic instrument table.

For the automatic instrument table, see “OPTIONAL ACCESSORIES” on page 46.

3After installing the instrument, loosen the fixing knob.

Now the body components can be moved.

4If the machine body is slightly off level, properly turn the adjusters at the four corners

for fine adjustment.

Do not unscrew the adjusters more than 1cm.

PREPARATIONS

Before carrying the instrument, be sure to affix it firmly by

turning the fixing screw at the base.

If the instrument is moved with the screw loosened, it may

result in damage to the instrument.

CAUTION

When moving the instrument, be sure to hold it at the bottom surface

with two people. Carrying by one person may cause back injury or

injury by falling parts. Also, holding areas other than the bottom sur-

face may cause pinching fingers between parts and injury by falling

parts as well as damage to the instrument.

CAUTION

To avoid potential injury, hold the instrument in the proper

position.

CAUTION

Holding the instrumentSpecified holding positions

Fixing knob

HOW TO CONNECT THE POWER CABLE

1Make sure the POWER SWITCH is OFF.

2Attach the power cable to the machine body.

3Plug the power cable into the 3-pin AC receptacle with grounding.

HOW TO CONNECT EXTERNAL I/O TERMINALS

RS-232C OUT

This machine can be connected to another device, including a personal computer via

the RS-232C OUT terminal.

1Connect the cable to the RS-232C OUT terminal of this machine.

2Connect the other cable end to another device.

RS-232C IN

This machine can be connected to another device, including a bar code reader via the

RS-232C IN terminal.

1Connect the cable to the RS-232C IN terminal of this machine.

2Connect the other cable end to the external device.

PREPARATIONS

To avoid electrical shock, do not handle the power plug

with wet fingers.

CAUTION

Input terminalOutput terminal

INITIAL SETTINGS

During the initial setting, date, time, operating time of the power save function, RS-

232C, mode of average value, buzzer and message can be set.

Preparations

1Make sure the power cable is connected.

For connection, see “HOW TO CONNECT THE POWER CABLE” on page 14.

2Check the no-patient condition of the instrument and turn the POWER SWITCH ON.

Displaying The Menu Screen

1Make sure that the Measurement screen is displayed.

2Press on the control panel.

The Menu screen is displayed.

Returning To The Measurement Screen

1Press , on the control panel, move the cursor to “EXIT” and press

MEASUREMENT SWITCH .

Or, press on the control panel. The Measurement screen returns.

PREPARATIONS

•When the machine is moved from a cold room to a warm room or

when the room temperature suddenly rises, it may cause dewing in-

side the machine and disable measurement. In this case, leave the

machine alone for about 30min until it reaches room temperature.

MEMO

Measurement switch

Оборудовани

е для

оптик,офталь

мологических

кабинетов,зак

азы на сайте

www euromed i

n ua

Andere Handbücher für CT-80

Inhaltsverzeichnis

Andere Topcon Medizinische Geräte Handbücher

Topcon

Topcon MC-4S Bedienungsanleitung

Topcon

Topcon TRC-NW200 Bedienungsanleitung

Topcon

Topcon SL-D701 Bedienungsanleitung

Topcon

Topcon GTS-3B Bedienungsanleitung

Topcon

Topcon TRK-1P Bedienungsanleitung

Topcon

Topcon TRC-NW400 Bedienungsanleitung

Topcon

Topcon ALADDIN HW3.0 Bedienungsanleitung

Topcon

Topcon 3D OCT-1 Bedienungsanleitung

Topcon

Topcon KB-50 Bedienungsanleitung

Topcon

Topcon RM-8900 Bedienungsanleitung

Topcon

Topcon PixelChart PC-50S Bedienungsanleitung

Topcon

Topcon LC-300G Bedienungsanleitung

Topcon

Topcon Maestro2 Bedienungsanleitung

Topcon

Topcon DRI OCT-1 Triton Bedienungsanleitung

Topcon

Topcon OM-4 Bedienungsanleitung

Topcon

Topcon SL-6E Bedienungsanleitung

Topcon

Topcon CV-50000 Bedienungsanleitung

Topcon

Topcon SL-1E Bedienungsanleitung

Topcon

Topcon SL-D7 Bedienungsanleitung

Topcon

Topcon Compu-Vision CV-5000 Bedienungsanleitung

Topcon

Topcon SL-D4 Bedienungsanleitung

Topcon

Topcon DC-4 Bedienungsanleitung

Topcon

Topcon CT-1P Bedienungsanleitung

Topcon

Topcon SP-1P Service-Handbuch

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung