Topcon 3D OCT-1 Bedienungsanleitung

3D OCT-1 Maestro

Ver.8.11 Quick Reference Guide

Index

Select Patient P.3

Capturing OCT P.4

Manual mode P.6

Anterior segment scanning P.8

Fundus photography P.11

Peripheral Fundus Photography P.12

Double click on desktop, and start OCT.

【In case of new patient】

Click [Register New Patient] and access to register patient

panel. Input the necessary items and click [Register].

【In case of existing patient】

Select a patient in patient list or search a patient by using search window.

Patients list

Select patient

[patient ID] is mandatory.

What data should be the

essential can be fixed in

setting menu.

Name, DOB, sex, ethnicity is

recommended to refer the

accurate Normative Database.

In patient list field, all

patients are displayed.

It will be more efficient to

sort and to search in search

window by ID/name/last test

date.

Click [Capture] of OCT

software top left. PC

Search Window

Capturing OCT

Select the eye to capture OD(Right), OU (both) or OS(Left).

Select one of the scans in the Capture icons menu on OCT monitor.

It is possible to change the tab name, scan

patterns (max 4 a tab), scan protocols, in

[SETUP].

Please see users manual for the detail.

Set the patient face on chinrest. Keep the chin and forehead stable.

Be sure to adjust the chinrest height to align the “eye marker” and the

corner of eye.

Then, touch [Capture START] .

Capture Icons

SETUP

Chinrest UP-DOWN

button

It is OK to touch

[Capture START]

if the pupil comes

roughly inside

light-blue lines.

Capture START

button

OCT

Please tell the patient to

look at the fixation

target.

Internal Fixation Target

OCT

Auto alignment Auto Focus Auto Optimize Auto shoot

（no operation is needed)

Ready for shooting. Once the timer

counts zero, auto shooting will work.

Before getting zero, by touching

[Capture STOP], timer, and Z button, it

will be switched to Manual mode.

please see P. 5 manual operation.

If the below messages are displayed,

check the patient condition.

[Please stabilize the fixation]

[Please open patient’s eye]

Touch [Retry] between [Retry / Manual],

and re-start auto alignment.

Please see P.5 manual operation.

If you touch [Capture STOP], it will be

switched to manual mode.

please see P. 5 manual operation.

The captured data is displayed on the monitor. Touch [OK] to capture

the next. Touch [Delete] button to erase the current data.

Delete

Manual mode

Touch the pupil center each in Camera 1 and Camera 2,

Touch [Capture START], then auto focus / auto shoot will work.

It is possible to adjust alignment (scanning beam position) manually.

OCT

Manual alignment is available in 3 fields.

When the 3 green frames are displayed, it is ready for capturing.

Touch [Capture START]

It is possible to adjust scan position etc.

If the brackets are

orange, touch the

brackets to correct

alignment.

When B scan is

missing in upper

area, drug down the

Z position.

Green line:

Scan

position

Blue cross

Fixation

target

position

ON/OFF for LFV

LIVE FUNDUS VIEW

When B scan image

quality is poor, touch

[Optimize]

Necessary to have

IQ30 or more.

OCT

Touch the live fundus window, the below scan position adjustment

is available. Once all green frames are displayed, touch

[Capture START].

It is possible to

change scan

positions by

up/down/L/R

button.

Scan line can be

moved directly

by touch and

drug.

Touch the [Advance] to use the following menu.

These allow to change

illumination level and flash

level.

This allows to

use diopter

compensation

lens, in case of

high myopia or

high hyperopia.

Small pupil mode

Anterior segment scanning

OCT

Touch one of Anterior Segment Scanning icons.

For angle scanning For cornea curvature

observation

Touch “Yes” on attention window, and place the forehead rest

attachment. Adjust the chinrest height.

Be careful to have eye surface

behind the forehead rest.

Have the chin stay down

In case of radial scan, please

navigate the patient to look

straight. Although no internal

fixation target is available.

Tap the center of pupil (or where you

want to capture) then the alignment

cameras will catch that area.

OCT

In case of Radial scan, Auto Alignment works.

When Auto Alignment fails, go to step

Adjust the cornea vertex

position (white reflection) in

the blue square with Z-

up/down buttons.

When Auto Alignment succeed, the cornea B scan is already in the

window.

When it fails, please adjust the alignment position, and Z position.

Once you have all green frames, touch [Capture Start].

【Radial scan】

“Up” “Down” button will move

the camera distance to patient.

Press “UP” button more than 2

seconds, until you get the cornea

OCT image coming.

Signal indication shall be

around 20.

Adjust the arrows to have scan line on the

center of cornea.

Navigate the customer to see side so that the angle comes in center.

Please touch [Capture Start] when all green frames are displayed.

Adjust the angle between the blue

lines with Z-up/down buttons.

【Line scan】

OCT

Signal indication shall be around

20.

“Up” “Down” button will move the

camera distance to patient.

If you do not see the line, touch

“UP” button about 2 seconds, until

you get the Angle OCT image.

Check the preview images on OCT monitor.

If it is OK press [OK], if you want to

cancel, please press [delete] button.

Andere Handbücher für 3D OCT-1

Inhaltsverzeichnis

Andere Topcon Medizinische Geräte Handbücher

Topcon

Topcon CT-80 Bedienungsanleitung

Topcon

Topcon DRI OCT Triton Bedienungsanleitung

Topcon

Topcon TRC-NW8F Bedienungsanleitung

Topcon

Topcon TRK-1P Bedienungsanleitung

Topcon

Topcon SL-D7 Bedienungsanleitung

Topcon

Topcon ALADDIN HW3.0 Bedienungsanleitung

Topcon

Topcon Compu-Vision CV-5000 Bedienungsanleitung

Topcon

Topcon RM-8900 Bedienungsanleitung

Topcon

Topcon CT-80 Bedienungsanleitung

Topcon

Topcon SL-D4 Bedienungsanleitung

Topcon

Topcon SL-D701 Bedienungsanleitung

Topcon

Topcon 3D OCT-1 Bedienungsanleitung

Topcon

Topcon TRC-NW200 Bedienungsanleitung

Topcon

Topcon DRI OCT-1 Triton Bedienungsanleitung

Topcon

Topcon KR-1 Bedienungsanleitung

Topcon

Topcon DC-4 Bedienungsanleitung

Topcon

Topcon TRC-NW8Fplus Montageanleitung

Topcon

Topcon LC-300G Bedienungsanleitung

Topcon

Topcon GTS-3B Bedienungsanleitung

Topcon

Topcon IS-100 Bedienungsanleitung

Topcon

Topcon SL-1E Bedienungsanleitung

Topcon

Topcon SL-6E Bedienungsanleitung

Topcon

Topcon 3D OCT-1 Bedienungsanleitung

Topcon

Topcon Maestro2 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung