Tornado 94220 Handbuch

TORNADO INDUSTRIES

7401 W. LAWRENCE AVENUE

CHICAGO, IL 60706

(708) 867-5100 FAX (708) 867-6968

www.tornadovac.com

Tornado

Operation & Maintenance Manual

For Commercial Use Only

Taskforce

1200 & 1700 Wet/Dry Vacuums

MODEL NOS.

94220 & 94221 (12 Gallon)

94225 & 94226 (17 Gallon)

94224 (17 Gallon with Trot-Mop)

For Parts List see L2756FDP

Effective 3/13/2006

NOTES

This instruction book covers:

CATALOG NO. 94220 94224 94225 94221 94226

SERIES D A D D D

H.P./CFM 1.3 / 112 1.6 / 119 1.6 / 119 1.5 / 112 1.5 / 112

CAPACITY 12 17 17 12 17

RECOVERY 8.8 13.8 13.8 8.8 13.8

WATERLIFT 93” 96” 96” 87” 87”

MOTOR TYPE 115V

2-STAGE

BYPASS

115V

2-STAGE

BYPASS

115V

2-STAGE

BYPASS

230V

2-STAGE

BYPASS

230V

2-STAGE

BYPASS

POWER CORD 25 FT. GFCI 25 FT. GFCI 25 FT. GFCI 25 FT. GFCI 25 FT. GFCI

DIMENSIONS 18”L x 17”W

x 26”H

18”L x 17”W

x 26”H

18”L x 17”W

x 26”H

18”L x 17”W

x 26”H

18”L x 17”W

x 26”H

MODEL FEATURES WET/DRY TROT-MOP WET/DRY WET/DRY WET/DRY

CERTIFICATION ETL* ETL* ETL*

ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

TABLE OF CONTENTS:

Warranty Information.......................................................... 4

Specifications ..................................................................... 5

Safety Instructions, Warnings, Grounding Instructions....... 6

Setup and Operation .......................................................... 9

Troubleshooting ................................................................. 12

Thank you for choosing Tornado products. We are proud to offer the most

complete line of commercial and industrial cleaning equipment in the industry.

Our reputation for quality, innovation and durability is unsurpassed.

* Effective January 1 st, 2005. Terms subject to change without notice.

1) Windshear™ Blower-Dryer, Insulation Blowers, T191, T201, T12/1, CV 30, CV 38, CW 50, CW

100, Pro PAC Vacs, Duo-Upright Carpetkeepers™, Gas & Electric Pressure Washers, and all

chargers are warranted for 1 (one) year for both parts and labor.

2) Warranties on the EB30 are 90 days (batteries, charger, parts, accessories)

3) Warranties on all riding sweepers including the ICC1, KM 100/100 R, KMR 1250, and KMR

1700 are 24 months parts/6 months labor OR 1000 hours of operation, whichever comes

first. Warranties on the 75/140 & 90/140 are 24 months parts/12 months’ labor OR 1,000

hours of operation whichever comes first.

4) All non-wear item parts purchased after warranty expiration are warranted for 90 days.

5) Warranty starts from the date of sale to the consumer or, at Tornado’s discretion, 6 months

after dealer purchased the unit from Tornado, whichever comes first.

Note: Tornado, The Latest Dirt, Floorkeeper, Carpetkeeper, Carpetrinser, Carpetrinser/Dryer,

Headmaster, Taskforce, PAC-VAC, T-Lite, Glazer, Windshear, Max-Vac, CV 30, CV 38, and

Trot-Mop are trademarks of Tornado Industries.

1-800-VACUUMS

Chicago area: (708) 867-5100

Fax: (708) 867-6968

7401 W. Lawrence Avenue

Chicago, IL 60706

Features in Brief:

xDesigned for superior ease of operation and storage with high efficiency handling,

stack-ability and cord management functions.

xGasket encased motors that provide low sound levels during operation.

xIndustrial grade components which include highly durable, two stage blower suction

motors with self-cooling design.

xPatented, unique wet/dry cartridge filters (99% efficient to 1 Micron) that attach to

the unit without hardware.

xCustom motor housing design that provides improved maintenance and repair

accessibility.

xOptional throwaway paper bags for dry applications.

Overall Design Features:

The Tornado Taskforce 1200 (12 Gallon) & 1700 (17 Gallon) Wet/Dry Vacuums are

industrial grade units designed for stack-ability, cord management, durability,

maneuverability and ease of operation. They include molded recessed handles for ease

of carrying and dumping. The units have been sized to fit in the back seat or trunk of a

car. Both units hold liquid to 75% of their capacity and the 17-Gallon unit has it's own

drain hose system preventing the need for awkward drain plugs. Both units have a

unique inlet pipe design, which protects the wet/dry filter by creating a vortex flow within

the tank that forces the debris toward the tank walls. All units also have a custom motor

housing design, which reduces the motor sound level and provides good accessibility

for maintenance and repairs. In addition, these units have a solid molded handle

designed specifically for cord storage.

Standard Accessories, except Trot-Mop Model 94224:

x14" Plastic Squeegee Tool

x2-Piece Chrome Plated Extension Wand

x10' Crush-proof Flexible Hose with Swivel

xCrevice Tool

xRound Brush Tool

xBare Floor Tool

Safety Instructions

When using this unit, basic precautions should always be followed. Read all instructions

before using this unit.

WARNING: To reduce the risk of fire, electric shock or injury:

Turn off all controls, unplug from power source and allow unit to cool down before

attempting any maintenance or adjustment. Turn off and unplug when not in use.

Do not expose to rain or submerge in water. Store indoors. Do not use pressurized

water to clean machine. Do not allow to be used as a toy. Close attention is necessary

when used by or near children

Use only as described in this manual. Do not leave machine unattended when running.

If machine is not working as it should, has been dropped, damaged, left outdoors, or

dropped into water, consult an authorized Tornado service center.

Keep hair, loose clothing, fingers, and all parts of body away from openings and moving

parts.

Do not put any object into openings. Do not use with any opening blocked. Keep

openings free of dust, lint, hair, and anything that may reduce airflow.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot

ashes.

Do not pick up flammable or combustible liquids, such as gasoline, or use machine

where they may be present. Do not handle plug or appliance with wet hands.

Unroll the power cord before plugging it into a grounded outlet. Do not pull or carry by

cord, use cord as handle, close a door on cord, or pull cord around sharp edges or

comers. Do not run appliance over cord. Keep cord away from heated surfaces.

Check power cord for signs of crushing, cutting or heat damage. If replacement of plug

or cord is needed, use only identical replacement parts.

Keep all connections dry and off the ground. Do not allow electrical cords to contact

water. Use only extension cords having an electrical rating not less than the rating of the

product. Do not unplug by pulling on cord. To unplug, grasp plug, not cord.

Any electrical wiring or repairs performed on this machine should be done by Authorized

Service Personnel in accordance with National and Local electrical codes. Use only

manufacturer's recommended attachments.

Wear protective clothing, ear plugs and footgear at all times. Use extra care when

cleaning on stairs.

Do not operate the unit when fatigued or under the influence of alcohol or drugs.

The manufacturer cannot be held responsible for any damage/injury caused to persons

or property because of improper procedures used which are not specified in this

manual.

SAVE THESE INSTRUCTIONS

WARNING: Failure to adhere tp any of the instructions provided in this

manual could result in serious bodily injury or property damage.

BEFORE OPERATING MACHINE:

Read this manual completely before attempting to operate machine. This manual has

important information for the use and safe operation of the machine. Keep this manual

on file and handy. If additional information is needed, please contact your local

distributor or contact us at:

Tornado Industries, Inc. (708) 867-5100

7401 W. Lawrence Ave. Fax: (708) 867-6968

Chicago, IL 60706 Service E-mail: [email protected]

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should malfunction or break down, grounding

provides a path of least resistance for electrical current to reduce the risk of electric

shock. This appliance is equipped with a cord having an equipment-grounding

conductor and grounding plug. The plug must be plugged into an appropriate outlet that

is properly installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment-grounding conductor can result in

electric shock. Check with a qualified electrician or service person if you are in doubt as

to whether the outlet is properly grounded. Do not modify the plug provided with the

appliance; if it will not fit the outlet, have a proper outlet installed by a qualified

electrician. This appliance is for use on a nominal 120 or 230-volt circuit (depending on

model in use), and has a grounding plug that looks like the plug illustrated in the sketch

below. A temporary adapter that looks like the adapter illustrated the sketch may be

used to connect this plug to a 2-pole receptacle as shown, if a properly grounded outlet

is not available. The temporary adapter should be used only until a properly grounded

outlet can be installed by a qualified electrician. The green-colored rigid ear, lug or the

like, extending from the adapter must be connected to a permanent ground such as a

properly grounded outlet box cover. Whenever the adapter is used, it must be held in

place by a metal screw.

EXTENSION CORDS

Use only three-wire extension cords (must be 12 Ga. by 3 wire minimum for 50 ft. length

or 10 Ga. by 3 wire minimum for 100 ft.) that have three-prong grounding-type plug caps

and three-pole receptacles that accept the appliance's plug. Replace or repair damaged

cords.

Machine Components

ITEM # DESCRIPTION PART #

1 VAC HEAD -

2CANISTER -

3 10' FLEXIBLE HOSE 30257

4 BARE FLOOR TOOL 90714

5 14" SQUEEGEE FLOOR TOOL 30486

6 UPHOLSTERY TOOL 90711

7 ROUND BRUSH TOOL 90712

8 2-PIECE EXTENSION WAND 30258

9 CLOTH BAG (Not supplied wImachine) 19816

10 PAPER BAG (Not supplied wImachine) 90701

Machine Setup and Operation Guidelines

(Refer to Machine Components on previous page)

NOTE: READ ALL SAFETY INSTRUCTIONS IN THIS MANUAL BEFORE

OPERATING MACHINE

SET UP

1. Remove the Vac-Head by releasing the

side clamps.

2. Remove tools, parts and hose from inside

unit.

3. Wheels

TO ATTACH FRONT WHEELS:

a.) Remove wheel parts from protective bag.

b.) Set machine on its side and screw front

wheels directly into the bottom inserts.

Do not overtighten!

TO ATTACH REAR WHEELS:

(You will need a hammer and some type of

workbench or table to install the rear wheels).

a.) Set machine on its opposite side and

assemble the parts as shown (refer to

photo A).

b.) Insert clevis pin into rear axle hole and

place washer on the -Wheel side (refer to

photo A1).

c.) Position machine firmly on a workbench

or table edge as shown (refer to photo A2)

and use hammer to attach wheel to

the unit. Make sure wheels are attached

securely.

Repeat the above procedure for the other

wheel.

4. Inspect the Wet/Dry filter inside the

machine. Remove any obstructions and

clean or replace if necessary (see

Operation Guidelines).

5. Inspect the Canister for obstructions and

clear if necessary.

NOTE: It is not necessary to use filter bags

with your machine.

6. Replace the Vac-Head and securely tighten

the side clamps.

7. Securely insert the larger end of the flexible hose sleeve into the suction Intake

(refer to photo B).

8. Connect the extension wand onto the flexible hose.

9. Connect a floor tool onto the extension wand.

10.Check to make sure the On/Off switch is

in the "OFF" position.

NOTE: If your machine is supplied with a tank

drain hose, be sure the tank drain Ball Plug is

covering the hose opening before starting the

unit. The vacuum will not operate properly

with the Tank Drain Hose open (refer to

photo C).

OPERATION

AFTER SUCCESSFUL COMPLETION OF

THE SET UP PROCEDURES, YOUR

MACHINE IS NOW READY TO OPERATE.

PLEASE OBSERVE THE FOLLOWING

STEPS AND PRECAUTIONS AT ALL

TIMES:

1. While tightly grasping the flexible hose,

start the unit by turning the on On/Off switch

to the "ON" position.

A. WET PICKUP APPLICATIONS:

Using a floor tool move slowly across the

area you wish to clean. As the Canister of the

machine begins to fill, a float inside the filter

cage (refer to photo D) will rise and will close

the vacuum motor intake. Suction will stop.

At this point, turn the On/Off switch to the

"OFF" position and disconnect the power

cord from the receptacle.

Remove the Vac-Head and empty the

Canister as follows:

Unit Includes Tank Drain Hose:

Place the Tank Drain Hose in an area where

drainage will not be obstructed. Pull the tank

drain Ball Plug away from drain nozzle to

drain. Replace Ball Plug to close off drain

hose and attach drain hose back in its holding

bracket .

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tornado Staubsauger Handbücher

Tornado

Tornado CVD 30/1 Bedienungsanleitung

Tornado

Tornado SURGE 220 Bedienungsanleitung

Tornado

Tornado 98145 Bedienungsanleitung

Tornado

Tornado TASKFORCE 95953 Handbuch

Tornado

Tornado CK 13/1-QD Bedienungsanleitung

Tornado

Tornado Pac-Vac 6 Roam Handbuch

Tornado

Tornado ExSELLerate Series Einrichtungshandbuch

Tornado

Tornado CK 3030 Produkthandbuch

Tornado

Tornado CV 38/1 Bedienungsanleitung

Tornado

Tornado Campus TO4560 Bedienungsanleitung

Tornado

Tornado TV2 SS Handbuch

Tornado

Tornado Pro PAC Handbuch

Tornado

Tornado TO 4210 Bedienungsanleitung

Tornado

Tornado CVD 38/2 Bedienungsanleitung

Tornado

Tornado TO 4210 Bedienungsanleitung

Tornado

Tornado CK-14/1 PRO Handbuch

Tornado

Tornado CA 6200 Bedienungsanleitung

Tornado

Tornado 95995 Bedienungsanleitung

Tornado

Tornado S15 Handbuch

Tornado

Tornado 4000 SERIES Leitfaden

Tornado

Tornado TASKFORCE 98995 Bedienungsanleitung

Tornado

Tornado 95961 Bedienungsanleitung

Tornado

Tornado B2000 Bedienungsanleitung

Tornado

Tornado Taskforce 17 Einrichtungshandbuch

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch