Toshiba B-EP2DL Series Bedienungsanleitung

PRINTED IN JAPAN

TOSHIBA Thermal Printer

B-EP2DL/EP4DL SERIES

Document No. EO15-33005

Original Sep., 2008

(Revised )

tion Installation Manual

PRELIMINARY

Linerless Label Kit, which are under development

as of November 7, 2008, could be changed.

EO15-33005

TABLE OF CONTENTS

Page

1. Linerless Label Kit: B-EP902-LL-QM-R /B-EP904-LL-QM-R----------------------------------------1- 1

2. Wireless LAN Board: B-EP700-WLAN-QM-R------------------------------------------------------------2- 1

3. Bluetooth Module: B-EP700-BLTH-QM-R ----------------------------------------------------------------3- 1

CAUTION!

1. This manual may not be copied in whole or in part without prior written permission of TOSHIBA

TEC.

2. The contents of this manual may be changed without notification.

by TOSHIBA TEC CORPORATION

ll Rights Reserved

570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33005

1. Linerless Label Kit: B-EP902-LL-QM-R/B-EP904-LL-QM-R

1- 1

INSTALLATION PROCEDURE FOR OPTIONAL

EQUIPMENT

1. Linerless Label Kit: B-EP902-LL-QM-R/B-EP904-LL-QM-R

The B-EP902-LL-QM-R/B-EP904-LL-QM-R linerless label kit is a platen roller unit designed for enabling the

B-EP2DL/B-EP4DL series portable printer to issue linerless labels.

The B-EP902-LL-QM-R is for the B-EP2DL series, and the B-EP904-LL-QM-R is for the B-EP4DL series,

respectively.

•Packing List

The following parts are supplied with the kit. Make sure you have all items shown below.

Linerless label kit (1 pc.)

Installation Manual (1 copy)

WARNING!

1. Turn the printer power off and disconnect the power cord before installing an optional

equipment.

2. Be careful not to pinch your fingers or hands with the covers.

3. Be careful not to injure your fingers when installing the cutter module.

WARNING

1. Follow all manual instructions. Failure to do so could create safety hazards such as fire or

electrocution.

• Manual instructions must be followed when installing option kits or adding cables to avoid

system failures and to insure proper performance and operation

• Failure to follow manual instructions or any unauthorized modifications, substitution or change

to this product will void the limited product warranty.

2. Turn the power off and remove the battery pack from the printer before installing this kit. Failure to

do this may cause electric shock or injury.

3. Do not touch the print head and around it immediately after printing, as doing so may cause you to

get burned.

CAUTION!

• Do not drop or hit this kit hard, or it may be broken.

• Do not push the strip shaft too hard. If it is deformed, feed failures may result.

• Do not use any chemical solvent such as thinner or benzene to clean the roller, as doing so

may cause feed failures.

• Do not damage the roller with a sharp object. Doing so may cause print failures or feed failures.

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33005

1. Linerless Label Kit: B-EP902-LL-QM-R/B-EP904-LL-QM-R

1- 2

•Required Tools

●Slotted jewellers screw driver

●Phillips head jewellers screw driver (Only for installing the B-EP904-LL-QM-R)

•Installation Procedure

1. Turn the printer power off and remove the battery pack from the printer.

2. Press the top cover open button and fully open the top cover.

3. Remove the inner top cover using the following procedure.

(For the B-EP2DL Series)

Release the two hooks on the right side of the inner cover with a slotted jewellers screw driver and

remove the inner cover from the top cover.

If the inner cover cannot be removed easily, release the left side hooks, also.

(For the B-EP4DL Series)

(1) Remove the two screws securing the inner cover with a Phillips head jewellers screw driver.

(2) Release the two hooks on the right side of the inner cover with a slotted jewellers screw driver.

(3) Release the three hooks on the left side of the inner cover with a slotted jewellers screw driver,

and remove the inner cover from the top cover.

NOTE: Do not push the hooks too hard, as doing so may break the hooks.

Top Cover

Hook

Inner Cover

Top Cover

Hook

Inner Cover

M-2 x 5 Screw

Hook

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33005

1. Linerless Label Kit: B-EP902-LL-QM-R/B-EP904-LL-QM-R

1- 3

4. While pushing the hook on the right side of the platen unit with a slotted jewellers screw driver, remove

the platen unit upward from the printer.

NOTES: 1. Do not push the hook too hard, as doing so may break the hook.

2. Keep the removed platen unit safe.

5. Install the linerless label kit in place of the platen unit. First, fit the hook of the platen gear side, then

one on the other side.

6 Attach the inner cover in place.

(For the B-EP2DL Series)

First, fit the left side of the inner cover, then the right side.

(For the B-EP4DL Series)

(1) First, fit the left side of the inner cover, then the right side.

(2) Secure the inner cover with the two screws which were removed in Step 3.

Gear

Hook

Platen Unit

Linerless Label Kit

Top Cover

Hook

Inner Cover

Top Cover

Inner Cover

Strip Shaft

M-2 x 5 Screw

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33005

1. Linerless Label Kit: B-EP902-LL-QM-R/B-EP904-LL-QM-R

1- 4

7 Make sure that the top cover can be closed completely.

8 Change the printer setting to activate the linerless label kit.

•Changing the Printer Setting

Use the following procedure to change the printer setting to activate the linerless label kit.

1. Load the battery pack in the printer.

2. While holding down the [FEED] button, press the

[POWER] button.

The printer starts up in the system mode.

3. Press the [PAUSE] button twice.

4. Press the [POWER] button until “LINERLESS XXX” is

displayed on the LCD.

5. When the “LINERLESS OFF” is displayed, press the

[PAUSE] button to set this parameter to ON.

When the “LINERLESS ON” is displayed, go to Step 6

without pressing the [PAUSE] button.

6. Press the [POWER] button until “<2>MODE SETTING”

is displayed on the LCD.

7. Press the [FEED] button twice until “<0>SHUTDOWN”

is displayed on the LCD.

8. Press the [POWER] button to turn the printer power off.

The printer setting change is completed.

<0>SHUTDOWN

<2>MODE SETTING

LINERLESS OFF

LINERLESS ON

<2>MODE SETTING

<0>SHUTDOWN

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33005

2. Wireless LAN Board: B-EP700-WLAN-QM-R

2- 1

2. Wireless LAN Board: B-EP700-WLAN-QM-R

Thank you for purchasing TOSHIBA wireless LAN kit, B-EP700-WLAN-QM-R.

The B-EP700-WLAN-QM-R is an optional wireless LAN interface board for the B-EP2D/EP4D Series.

The pictures used in this document are those of the B-EP4D, but the installation procedure is common with

the B-EP2D unless otherwise noted.

•Packing List

The following parts are supplied with the kit. Make sure you have all items shown below.

Wireless LAN Board (1 pc.)

FPC cable (2 pcs.)

Installation Manual (1 copy)

•Installation Procedure

1. Turn off the printer.

2. Slide the battery lever in the direction of the arrow, and remove the battery pack from the printer.

3. Remove the four tapping screws (T-3x10) from the bottom cover.

1. Follow all manual instructions. Failure to do so could create safety hazards such as fire or

electrocution.

• Manual instructions must be followed when installing option kits or adding cables to avoid

system failures and to insure proper performance and operation.

• Failure to follow manual instructions or any unauthorized modifications, substitution or change to

this product will void the limited product warranty.

2. Turn the power off and remove the battery before installing the wireless LAN module.

3. Be careful not to

inch

our fin

ers or hands with the covers.

WARNING!

Battery Lever

Battery Pack T-3x10 Tapping Screw

T-3x10 Tapping Screw

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33005

2. Wireless LAN Board: B-EP700-WLAN-QM-R

2- 2

4. Press the top cover open button to open the top cover.

5. Remove the left side cover in the direction of the arrow.

NOTE: The gears shown in the picture below is not secured and is easily removed. Be careful

not to drop and break or lose it.

6. Remove the right side cover and the front cover in the direction of the arrow, respectively.

Top Cover

Top Cover Open Button Left Side Cover

B-EP4D B-EP2D

Gea

Gear

Gea

Right Side Cover

Front Cove

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33005

2. Wireless LAN Board: B-EP700-WLAN-QM-R

2- 3

NOTE: As the fold of the FPC cable differs depending on the printer, please connect a correct one to the

printer.

B-EP4D Series

B-EP2D Series

FCC Cable Forming Indication Figure

15 2614.5

150

20 22 37.5 14

7.5 15.5 32.5 20 29.5 22.5 8.5 14

FCC Cable Forming Indication Figure

FCC Cable Folding Directions

7.5

46.5

29.5

6.5

8.5

Connect this terminal to

the Wireless LAN module.

Connect this terminal to

the MAIN PC Board.

Connect this terminal to

the MAIN PC Board.

(Unit: mm)

: Valley Fold

: Mountain Fold

15 20

150

7.5 20.5

28.5 14.5 34.5 21.5 16

168.5

6.529.5

1546.5

37.5

14.5

7.5

15.5

FCC Cable Folding Directions

Connect this terminal to

the Wireless LAN module.

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33005

2. Wireless LAN Board: B-EP700-WLAN-QM-R

2- 4

7. Connect the FPC cable to the wireless LAN module.

8. Pass the FPC cable through the slot, as shown in the picture. (B-EP4D model only)

9. Secure the ground wire with the Tapping screw (T-2x6) which secures the driver PC board.

Wireless LAN Module FPC Cable

Ground

wire

FPC Cable Slot

B-EP2D

B-EP4D Driver PC Board

Ground Wire

T-2x6 Tapping Screw Driver PC Board

Ground Wire

T-2x6 Tapping Screw

Andere Handbücher für B-EP2DL Series

Dieses Handbuch passt für folgende Modelle

Andere Toshiba Drucker Handbücher

Toshiba

Toshiba B-EX4 SERIES Bedienungsanleitung

Toshiba

Toshiba e-STUDIO 20CP Bedienungsanleitung

Toshiba

Toshiba TRST-A10 SERIES Technische Daten

Toshiba

Toshiba B-EP2DL Series Bedienungsanleitung

Toshiba

Toshiba B-SA4T Technische Daten

Toshiba

Toshiba e-studio 80f Bedienungsanleitung

Toshiba

Toshiba B-SA4TM SERIES Bedienungsanleitung

Toshiba

Toshiba B-EV4 Series Bedienungsanleitung

Toshiba

Toshiba B-415 Bedienungsanleitung

Toshiba

Toshiba E-STUDIO 282 Bedienungsanleitung

Toshiba

Toshiba B-EX4 T1 Series Technische Daten

Toshiba

Toshiba TRST-A10 SERIES Bedienungsanleitung

Toshiba

Toshiba B-480-QQ Bedienungsanleitung

Toshiba

Toshiba B-672-QP Bedienungsanleitung

Toshiba

Toshiba B-570 Bedienungsanleitung

Toshiba

Toshiba E-STUDIO E-Studio 3511 Service-Handbuch

Toshiba

Toshiba e-STUDIO 723 Bedienungsanleitung

Toshiba

Toshiba GA-1121 Programmierhandbuch

Toshiba

Toshiba GA-1121 Bedienungsanleitung

Toshiba

Toshiba GA-1120 Konfigurationshandbuch

Toshiba

Toshiba GA-1310 Bedienungsanleitung

Toshiba

Toshiba B-FP3D-GH52-QM-R Bedienungsanleitung

Toshiba

Toshiba TRST-A10 SERIES Bedienungsanleitung

Toshiba

Toshiba SureMark 4610 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung