Toshiba RBC-AMTU31-E Bedienungsanleitung

Model name:

RBC-AMTU31-E

• Read this manual before using the

RBC-AMTU31-E remote controller.

• Refer to the Owner’s Manual supplied with the

indoor unit for any instructions other than

operations of the remote controller.

Multilingual installation manuals and owner’s manual

The manuals in the following languages can be downloaded at our

website.

Български / Česky / Dansk / Deutsch / Ελληνικά / English / Español

/ Eesti / Suomi / Français / Hrvatski / Magyar / Italiano / 한국어 /

Latviešu / Norsk / Nederlands / Polski / Português / Română/

Русский / Slovensky / Slovenščina / Svenska / Türkçe / 中文

https://www.toshiba-carrier.co.jp/global/manual/rbc-amtu31-e.htm

TEMP.

ON / OFF

Wired remote controller

Owner’s Manual

For commercial use

Owner’s Manual

1-EN

Contents

1 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2 Part names and functions of the remote controller . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Display section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Operation section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3 Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Changing the fan speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Changing the set temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Power save operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4 Timer operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Setting the timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Cancelling the timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5 Louver direction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4-way cassette type, Compact 4-way cassette type only . . . . . . . . . . . . . . . . . . . 12

6 Application control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Power saving mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Performing settings of the power saving mode . . . . . . . . . . . . . . . . . . . . . . . . . . 17

8°C operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

7 Address setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Manual address setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Resetting the address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

To recognize the position of the corresponding indoor unit though

the indoor “UNIT No.” is known . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

8 DN setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Setting indoor unit DN codes (I.DN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Setting outdoor unit DN codes (O.DN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

9 Test run. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Execute a test run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

10 Service monitor function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

11 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Confirmation and check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Confirmation of check code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

12 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Owner’s Manual

2-EN

1Safety Precautions

• Read these “Safety Precautions” carefully before using.

• The precautions described below include important items regarding safety. Observe them without fail.

Understand the following details (indications and symbols) before reading the body text, and follow the

instructions.

• Keep this Manual at accessible place for future reference.

WARNING

Installation

•Do not attempt to install the air conditioner yourself.

Ask your dealer or a contractor with specialized experience to install the air conditioner. Electric shocks and/or a fire

may result if you attempt to install the air conditioner yourself and the air conditioner ends up not being installed

perfectly.

•Use only with the authorized air conditioner units.

Be absolutely sure to use only the authorized air conditioner units designated by the manufacturer.

Also, ask a contractor with specialized experience to install them. Electric shocks and/or a fire may result if you

attempt to install the parts yourself and the parts end up not being installed perfectly.

Operation

•Do not operate the buttons with wet hands.

Failure to heed this warning may result in electric shocks and/or trouble.

•Do not get the control unit wet.

Take steps to avoid getting the control unit wet. Failure to heed this warning may result in electric shocks, a fire and/

or trouble.

•If trouble (such as the smell of burning) has occurred, stop operation and turn off the main power switch.

Allowing operation to continue while the trouble has not been remedied may cause electric shocks, a fire and/or

trouble. Consult your dealer.

Relocation

•Do not undertake any repair work yourself.

Under no circumstances must you attempt to do any repair work yourself.

Instead, consult your dealer or a contractor with specialized experience. Electric shocks and/or a fire may result if you

attempt to do repair work yourself and this work ends up not being carried out perfectly.

•Consult your dealer when the control unit is to be relocated and re-installed.

Indication Meaning of Indication

WARNING Text set off in this manner indicates that failure to adhere to the directions in the warning could result in

serious bodily harm (*1) or loss of life if the product is handled improperly.

CAUTION Text set off in this manner indicates that failure to adhere to the directions in the caution could result in

minor bodily injury (*2) or damage (*3) to property if the product is handled improperly.

*1: Serious bodily harm indicates loss of eyesight, injury, burns, electric shock, bone fracture, poisoning, and other

injuries which leave aftereffect and require hospitalization or long-term treatment as an outpatient.

*2: Bodily injury indicates injury, burns, electric shock, and other injuries which do not require hospitalization or long-

term treatment as an outpatient.

*3: Damage to property indicates damage extending to buildings, household effects, domestic livestock, and pets.

Owner’s Manual

3-EN

CAUTION

Installation

•Do not install the remote controller unit where there are high levels of moisture, oils, grease or vibration.

Failure to heed this caution may cause trouble.

•Do not install the remote controller unit direct sunlight or near a heat source.

Failure to heed this caution may cause malfunctioning.

•Do not install the remote controller unit where there are sources of electro-magnetic noise.

Failure to heed this caution may cause unintended operation.

•Do not use this device in locations where children may be present.

Operation

•Do not drop the product or subject it to strong impact.

Failure to heed this caution may cause malfunctioning.

Owner’s Manual

4-EN

2Part names and functions of the remote

controller

This remote controller can control up to 16 indoor units.

Display section

All indicators are displayed in the display example below.

Actually, only the selected options will be displayed.

• blinks on the display of the remote controller the first time the power

switch is turned on.

• The initial settings progress while is blinking. Start to use the remote

controller after has disappeared.

NOTE

The LCD may temporarily be blurred due to static electricity.

1Operation mode indicator

Indicates the operation mode selected.

2SETTING indicator

Displayed when setting the timer or other

functions.

3TEST run indicator

Displayed during test run.

4Louver position display

Indicates the louver position.

5Swing indicator

Displayed during up / down movement of the

louver.

6Central control indicator

Displayed when the air conditioner is controlled

centrally and used with central control devices

such as the central remote controller.

If the use of the remote controller is prohibited by

the central control, blinks when the ON /

OFF, MODE, or TEMP. button on the remote

controller is pushed, and the buttons do not

function. (Settings that can be configured on the

remote controller differ depending on the mode of

the central control. For details, read the Owner’s

Manual of the central remote controller.)

7Louver lock indicator

Displayed when a louver is locked.

SET

TIME

TIMER SET

TEST

FILTER

RESET

TEMP.

FAN

SAVE

SWING/FIX

VENT

MODE

ON / OFF

UNIT LOUVER

Display

section

Operation

section

689

Owner’s Manual

5-EN

8UNIT No. display

Displays the number of the indoor unit selected.

Also displays check code of indoor and outdoor

units.

9Power saving mode display

Limits compressor speed (capacity) to save

energy.

Set temperature display

The selected set temperature is displayed.

Operation mode controlled indicator

Displayed when MODE button is pushed while

operation mode is fixed to cool or heat by the air

conditioner administrator.

Remote controller sensor indicator

Displayed when the remote controller sensor is

used.

Operation ready display

This display appears on some types of unit.

Pre-heat indicator

Displayed when the heating mode is energized or

defrost cycle is initiated.

While this indication is displayed, the indoor fan

stops or operate in fan mode.

No function indicator

Displayed when the function requested is not

available on that type of unit.

Fan speed indicator

Indicates the selected fan speed.

Ventilation operation display

This is displayed during the operation of a

commercially available ventilation fan when it is

connected.

Louver Number display

(example: [01], [02], [03], [04])

Service display

Displayed while the protective device works or a

trouble occurs.

Notice code icon

This icon appears on the display when a notice

code has occurred.

For details, contact your dealer (distributor).

Filter indicator

Reminder to clean the filter.

Timer mode indicator

Displays the timer mode.

Time display

Indicates time concerning the timer.

(Indicates an check code when an abnormality

occurs)

Check indicator

Displayed when the protective device activates or

an abnormality occurs.

689

Owner’s Manual

6-EN

Operation section

Once the settings have been configured, all you need to do is push the button from then on.

1button

Turns on the unit when pushed, and turns off when

pushed again.

2Operation lamp

Lights up during running.

Blinks when an abnormality occurs or the

protective device activates.

button

Adjusts the set temperature.

Select the desired set point by pushing .

4button (Fan speed select button)

Selects the desired Fan speed.

5button (Operation mode select button)

Selects desired operation mode.

6button

Use when a ventilator (commercially-available) is

connected. Push the button to turn on / off the

ventilator. Turning on / off the air-conditioner also

turns on / off the ventilator.

*No ventilator is connected if “ ” appears on

the remote controller display after pushing the

button.

7button (Unit / Louver select button)

Selects a unit number (left) and louver number

(right).

UNIT button:

If two or more indoor units are controlled by one

remote controller, use this button to select a unit to

adjust its air blow direction.

LOUVER button:

Selects a louver to control when adjusting the

louver lock setting or wind direction setting

separately for each louver.

8button (Power save operation)

Use to initiate power saving mode.

9button

Use to select automatic swing or fixed louver

position.

UNIT LOUVER

SWING/FIX

Owner’s Manual

7-EN

button (TEST button)

Use only for service.

(During normal operation, do not use this button.)

button (Filter reset button)

Resets “ FILTER” indication after cleaning.

button (Timer set button)

Use to setup the timer.

OPTION:

Remote controller sensor

Normally the temperature sensor of the indoor unit

senses the temperature. The temperature around the

remote controller can also be sensed. For details,

contact your dealer.

* Avoid using this function when group control is used

as unevenness in room temperature may occur.

(Thermostatic control of individual indoor units is not

possible.)

Owner’s Manual

8-EN

3Basic operation

When you use the air conditioner for the first time or change the settings, follow the procedures below.

From next time, pushing the button starts running of the air conditioner with the chosen settings.

Preparation

Turn on the power switch

• When turned on, the separation line appears and blinks on the remote controller display.

* The remote controller will not work for about 3 minute after turning on the power. This is not a

malfunction.

REQUIREMENT

• Keep the power switch turned on during use.

• When you resume using the air conditioner after a long period of disuse, turn on the power switch at least 12

hours before starting running.

Operations

1Push the button.

The operation lamp lights up.

2Push the button to select a operation

mode.

Each time you push the button, the operation

mode and its icon change in the following order:

Depending on the type of unit connected, the

operation modes that cannot be set will not be

displayed.

3Push the button to stop running.

The operation lamp turns off.

Changing the fan speed

1Push the button to select a fan speed.

• Each time you push the button, fan speed and

its indication change in the following order:

(“ Auto” cannot be selected in the FAN

mode.)

* The available fan speeds vary depending on the

indoor unit connected.

• The temperature sensor detects the return air

temperature at the indoor unit, which may

slightly differ from the actual room temperature

depending on installation condition. Set

temperature is a target of room temperature.

SET

TIME

TIMER SET

TEST

FILTER

RESET

TEMP.

FAN

SAVE

SWING/FIX

VENT

MODE

ON / OFF

UNIT LOUVER

1, 3

(Dehumidify)

AUTO Dry

Fan Cool

Heat

AUTO High Medium+

Low Low+ Medium

Owner’s Manual

9-EN

Changing the set temperature

1Push the buttons.

Push to increase the temperature, and to

decrease the temperature. (The set temperature

cannot be changed in the fan mode.)

NOTE

When cooling

Running starts in approximately 1 minute.

When Automatic cooling / heating

The operation is automatically switched to heating or

cooling based on the difference between the set

temperature and the room temperature.

When heating

• The air conditioner may continue running in the fan

mode for about 30 seconds after stopping heating.

• The heated air comes out after a 3 to 5 minutes of

pre-heating with the indoor fan kept turned off. (The

pre-heat indicator is displayed on the remote

controller.)

Power save operation

1Push the button during operation.

• Power save operation is activated.

• is appeared.

2Push button to deactivate Power save

operation.

• is disappeared.

NOTE

• Capability of the air conditioner is saved during the

Power save operation. The room may not become

cool or warm enough.

• Power save operation will not be deactivated by stop

operation, change operation mode or turn off the

power switch.

SET

TIME

TIMER SET

TEST

FILTER

RESET

TEMP.

FAN

SAVE

SWING/FIX

VENT

MODE

ON / OFF

UNIT LOUVER

Displayed

during Power

save operation.

Save button

Inhaltsverzeichnis

Andere Toshiba Fernbedienung Handbücher

Toshiba

Toshiba RBC-ASC11E Bedienungsanleitung

Toshiba

Toshiba CAMILEO H30 Montage- und Bedienungsanleitung

Toshiba

Toshiba RBC-AX23UWW-E Bedienungsanleitung

Toshiba

Toshiba RBC-AX31U(W)-UL Bedienungsanleitung

Toshiba

Toshiba RBC-AMS41E Bedienungsanleitung

Toshiba

Toshiba RBC-AMS54E Bedienungsanleitung

Toshiba

Toshiba RBC-AXU33UP-E Bedienungsanleitung

Toshiba

Toshiba RBC-AMS54E Bedienungsanleitung

Toshiba

Toshiba Carrier TCB-AX21UL Bedienungsanleitung

Toshiba

Toshiba RBC-AWSU52-UL Bedienungsanleitung

Toshiba

Toshiba ASD-MTG-KITQ9 Bedienungs- und Wartungshandbuch

Toshiba

Toshiba RB-RWS20-E Bedienungsanleitung

Toshiba

Toshiba WH-H1JE2 Bedienungsanleitung

Toshiba

Toshiba RBC-AMS55E-EN Bedienungsanleitung

Toshiba

Toshiba Carrier RBC-AX22CUL Bedienungsanleitung

Toshiba

Toshiba RBC-SRC-PE Bedienungsanleitung

Toshiba

Toshiba RBC-AMS55E-ES Bedienungsanleitung

Toshiba

Toshiba TCB-SC640U-E Bedienungsanleitung

Toshiba

Toshiba MML-AP0074NH-E Bedienungsanleitung

Toshiba

Toshiba RBC-AMSU51-ES Bedienungsanleitung

Toshiba

Toshiba RBC-AX32CE2 Bedienungsanleitung

Toshiba

Toshiba RBC-ASCU11-UL Bedienungsanleitung

Toshiba

Toshiba Carrier RBC-AX22CUL Bedienungsanleitung

Toshiba

Toshiba RBC-CR1-PE Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung