Toto ZL Series Montageanleitung

TOTO U.S.A., Inc. 1155 Southern Road,

Morrow, Georgia 30260

Tel: 888-295-8134 Fax: 800-699-4889

www.totousa.com

0GU4272

Rev A

Warranty Registration and Inquiry

For product warranty registration, TOTO U.S.A. Inc. recommends online warranty registration. Please visit

our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please con-

tact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260

(888) 295-8134 or (678) 466-1300 when calling from outside of U.S.A.

Warranty Registration and Inquiry

For product warranty registration, TOTO U.S.A. Inc. recommends online warranty registration. Please visit

our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please con-

tact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260

(888) 295-8134 or (678) 466-1300 when calling from outside of U.S.A.

Installation and Owner’s Manual

Manual de instalación y del propietario

Manuel d’installation et d’utilisation

Manual de Instalação e do Proprietário

Single Handle Lavatory Faucet

Grifo de Lavabo de Una Manija

Robinet de Lavabo à une Manette

Faucet de Alça Única com Balcão de Banheiro

TLP02301U

TLP02304U

TLP02307U

ENGLISH

Installation Procedure.....................4

Care and Cleaning..........................8

Maintenance....................................9

Warranty..........................................12

Rough-In Dimensions.....................46

Thanks for Choosing TOTO!..........2

Warnings..........................................2

Before Installation...........................2

Included Parts..................................3

Tools You Will Need........................3

Speciﬁcations...................................3

TABLE OF CONTENTS

THANK YOU FOR CHOOSING TOTO!

The mission of TOTO is to provide the world with healthy, hygienic and more

comfortable lifestyles. We design every product with the balance of form and

function as a guiding principle. Congratulations on your choice.

WARNINGS

BEFORE INSTALLATION

For safe operation of the faucet, please observe the following:

Operating Pressure:

Minimum Pressure....................20 psi (138 kPa), dynamic

Maximum Pressure...................80 psi (551 kPa), static

Do not use the product at an ambient temperature below 32º F (0º C)

Observe all local plumbing codes.

Before installing the faucet, be sure to thoroughly flush the supply pipes of dirt

and debris.

Make sure the water supply is shut off at the stop valve.

Read these instructions carefully to ensure proper installation.

TOTO reserves the right to update product design without notice.

ENGLISH

Check to make sure you have the following parts indicated below:

INCLUDED PARTS

TOOLS YOU WILL NEED

Level Tape

Measure

SPECIFICATIONS

Water Supply Pressure Minimum required: 20 psi (138 kPa) (Flowing)

Maximum allowed: 80 psi (551 kPa)

Water Supply Connection 3/8 Comp

Ambient Temperature 32~104°F (0~40°C)

Humidity Max. 90% RH

Flow Rate Maximum 1.2 gallon/min (4.5 L/min)

Adjustable

Wrench

Spout Assembly

Spout

Gasket

Flow

regulator

Slip Washer

Mounting nut

(without

groove)

Mixed

supply

hose

TLP02301 TLP02304

TLP02307

Drain lift rod

Lid Lid

Screw Screw

Pushbutton

Drain lift rod

Handle assembly

Handle

assembly

Gasket

Slip

Washer

Mounting nut

(with groove)

Hot water

supply hose

Cold water

supply hose

Drain assembly

Drain lift rod

connecting part

Nut

9/16-24 UNEF

Phillips

Screwdriver Hacksaw

ENGLISH

INSTALLATION PROCEDURE

1. Mount the handle

assembly.

(1) Insert the HOT/COLD

water supply hoses into the

mounting hole.

(2) Pass the HOT/COLD

water supply hoses through

the gasket, the slip washer

and the mounting nut

(with groove) one by one.

Then, pass the nut of the

connecting pipe through

the groove and secure the

handle assembly. (ill. 1)

2. Mounting the spout

assembly.

(1) Set the gasket, the slip

washer and the mounting nut

(without groove) on the spout

and secure the spout. (ill.2)

IMPORTANT: Align the spout so that it comes out the center of the

mounting hole.

ill. 1

Section View Handle

assembly

Lever

handle

Mounting

hole

Connecting

pipe

Gasket

Slip

Washer

Mounting

nut

(with groove)

Hot water

supply hose

Groove

Cold water

supply hose

ill. 2

Section View

Spout

Gasket

Slip washer

Mounting nut Mixed supply

hose

Mounting

hole

IMPORTANT: Align the shaft

position so that the handle

assembly comes to the center

of the mounting hole.

(3) Connect the hoses to the supply lines. The left hose (marked with red

band) connects to the hot water supply. The right hose connects to the

cold water supply. Thighten with wrench as needed.

ENGLISH

INSTALLATION PROCEDURE

ill. 3

Handle Assembly Connecting

pipe

Nut

Gasket

(black)

Flow regulator

Mixed supply hose

3. Connection of the

mixed supply hose.

(1) Turn the nut of the

connecting pipe and

connect the mixed supply

hose. (ill. 3)

Never turn the nut on the

mixed supply hose side.

The hose may twist and

cause water to leak.

4. Install drain assembly.

(1) Remove the plunger,

ﬂange and gasket from

the drain assembly by

unfastening the ﬂange and

pulling these parts from

the drain. (ill. 4)

ill. 4 Plunger

Flange

Deformed

gasket

Kick lever

box

Flanged nut

Drain

assembly

ENGLISH

INSTALLATION PROCEDURE

(113)

(145) (113)

(145)

(2) Insert the drain body up

through the drain hole from

below the lavatory. If necessary,

turn the nut and push the washer

and gasket (thick) down to allow

for clearance.

While holding the drain body in

place, fasten the ﬂange to the

drain body from the top. Ensure

that the gasket is between the

ﬂange and the lavatory as shown.

Once the ﬂange is fully seated,

turn the nut below the lavatory

up until a good seal is formed.

(3) Mount the drain lift rod in the proper direction. (ill. 6)

ill. 5

Lavatory

Plunger

Flange

Deformed

gasket

Flanged nut

Lever hole

Drain

assembly

Attention

to direction

of plunger

Spout

Part number of the lavatory

LT475 LT476

Spout

Unit: inch

(mm)

Other than the

part numbers

written on the left

Short

4-7/16”

Short 4-7/16”

Long

5-11/16”

Long 5-11/16”

ill. 6

Do not overtighten!

(ill. 5)

Reinsert the plunger if needed.

ENGLISH

INSTALLATION PROCEDURE

(4) Install drain assembly (continued)

(a) Insert the drain lift rod into the

guide from below the spout body.

(b) Mount the pushbutton, screw and

lid on the drain lift rod in that order.

(ill. 7)

5. Connect the drain assembly.

(1) Adjust the position of the drain lift rod so

that the clearance between the spout and the

pushbutton is 3/16”- 3/8” (5~10mm).

(2) Lower the pivot arm to the lowest position

in the condition described in part (a), secure

the screw of the drain lift rod connecting part

to anchor the pivot arm and the drain lift rod.

(ill. 9)

lift rod connecting part on the pivot arm and ﬁt

bushing A on the drain assembly.

(d) After passing the drain lift rod

through the drain lift rod connecting

part, pass the pivot arm through

the hole of the plunger of the

lever hole and secure it with

the pivot ball nut. (ill. 8)

CAUTION

If the pivot arm and the drain lift rod interfere with

the wall and the water drain pipe, cut them to a

length that they do not interfere. (ill. 10)

Make sure water is ﬂowing properly after installing

the faucet.

ill. 10

ill. 7

Guide

Drain lift rod

Connecting pipe

Mixed supply hose

Lid

Screw

Pushbutton

Drain lift rod

ill. 8

Drain lift rod

connecting part

Bushing B

Bushing A

Drain assembly Lever hole

Pivot arm

Pivot Ball

Nut

*Cut 3/8”- 13/16”(10~20) from

the anchoring metal ﬁttings.

ill. 9

Water drain pipe

Pivot arm

Drain lift rod

Pushbutton

Wall

3/16”~ 3/8”

(5~10)

ENGLISH

Clean the parts regularly to prevent the

accumulation of dirt and lime-scale.

For daily cleaning, use a neutral cleaner.

Acids are necessary ingredients of

cleaning materials for removing lime.

However, please pay attention to the

following points when cleaning ﬁttings

(ill. 11):

Only use cleaning materials which

are explicitly recommended for this type of application.

Never use cleaning materials which contain hydrochloric, formic or

acetic acid, as they may cause considerable damage.

Do not use phosphoric acid as it can also cause damage.

Never use cleaning materials or appliances with an abrasive effect,

such as cleaning powders, sponges or microﬁber cloths.

Please follow the cleaning material manufacturer’s instructions.

When using spray cleaners, spray ﬁrst onto a soft cloth or sponge.

Never spray directly onto the ﬁttings, as drops could enter openings

and gaps, which can then cause damage.

After cleaning, rinse thoroughly with clean water to remove any

cleaner residue.

Components with damaged surfaces must be exchanged, otherwise

this can cause an injury. Damage caused by improper treatment will

not be covered by our warranty.

CARE AND CLEANING

ill. 11

Thinner

Acidic/alkali detergents

Cleansers

ENGLISH

Check your faucet at least once a month for the following potential

problems and to do the following maintenance procedures:

Inspect for Leakage

• Check all water connections for signs of leakage. (ill. 12)

Looseness of the product

• Check for any parts that seem abnormal such as being loose as

compared when you ﬁrst began using the product. (ill. 13)

Tighten the Spout and Handle Assembly

• If the spout or handle is loose, tighten the mounting nut underneath

the spout or handle assembly.

If you continue to use the product with loose piping, weight is applied to

the pipe(s) and may result in water leakage.

If you leave any abnormality like looseness unﬁxed, part(s) may break or

plated surfaces may crack whereby injuring you.

If you ﬁnd a loose part, remove the cap and retighten the screw that se-

cures the main body. In case the looseness cannot be repaired, ask your

dealer or seller for repairs (subject to billing).

MAINTENANCE

abnormality No

looseness

ill. 13

ill. 12

No Water

Leaks!

ENGLISH

To clean the nozzle screen:

1. Loosen and remove the set screw using a hexagonal wrench (2 mm).

(ill. 16)

2. Insert the ﬂat-blade precision screwdriver in the notch between the

nozzle screen case and the spout, and remove the nozzle screen case.

Pay attention not to lose the O-ring of the nozzle screen case.

MAINTENANCE

(M3x7)

Flat-blade

precision

screwdriver

Spout

O-ring

(Semi-

transparent)

Nozzle screen

case

Set screw

Notch

Hexagonal wrench

(2mm)

How to secure the lever handle.

Close the stop valve before starting work.

1. Insert a ﬂat-blade precision screwdriver

into the clearance between the lever handle

and the cover, and lift and remove the cover.

(ill. 14)

2. Lift the lever handle and retighten the

setscrew with a hexagonal wrench (2.5mm)

3. Pass the cover over the lever handle,

press it into the counter surface and mount

it. (ill. 15)

Pay attention to the

direction of the cover.

Mount cover.

ill. 14 Flat-blade precision

screwdriver

Lever

Handle Remove Cover

Cover

Hexagonal wrench

(2.5mm)

ill. 15

ill. 16

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Toto Sanitärprodukte Handbücher

Toto

Toto EGO TX124LE Bedienungsanleitung

Toto

Toto TBW02005A Bedienungsanleitung

Toto

Toto TX1EA Bedienungsanleitung

Toto

Toto Nexus TL794DDLQ Montageanleitung

Toto

Toto TTMR202MFK Bedienungsanleitung

Toto

Toto Vivian TS220T Montageanleitung

Toto

Toto EGO II TX445SECMV3 Bedienungsanleitung

Toto

Toto Washlet SG Bedienungsanleitung

Toto

Toto EGO TX108LEBR Bedienungsanleitung

Toto

Toto Soiree TS960C2 Montageanleitung

Toto

Toto EGO TX115LEN Bedienungsanleitung

Toto

Toto TRADITIONAL TS301N6 Montageanleitung

Toto

Toto DONNA TX433SD Bedienungsanleitung

Toto

Toto MERCER TS756PSW Montageanleitung

Toto

Toto TVLM102NSR Bedienungsanleitung

Toto

Toto MONO TX447SM Bedienungsanleitung

Toto

Toto SS234 Bedienungsanleitung

Toto

Toto TOJA TX115LT Bedienungsanleitung

Toto

Toto TN74-2X Kurzanleitung

Toto

Toto MONO TX449SM Bedienungsanleitung

Toto

Toto EGO II Bedienungsanleitung

Toto

Toto REI R Bedienungsanleitung

Toto

Toto TLP03301 Bedienungsanleitung

Toto

Toto TRADITIONAL B Series Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema