TRENDnet TV-IP110W - Wireless Internet Camera Server... Bedienungsanleitung
TV-IP110
TV-IP110W
Quick Installation Guide
Table of Contents
English ...................................................................................................... 1
1
4
3
8
1. Before You Start
2. Hardware Installation .........................................................................
3. Configure the Internet Camera ..........................................................
.................................................................................
Table of Contents
Version 10.19.2007
Troubleshooting ........................................................................................
System Requirements
Package Contents
1. Before You Start
English
1
?
?
?
?AC Power Adapter (5V, 2.5A)
?1 x 2dBi Detachable Antenna
(
?
TV-IP110/TV-IP110W
Quick Installation Guide
Utility CD-ROM
TV-IP110W)
1.8m (5.9 ft) Cat.5 Fast Ethernet
cable
?
?
?
?
?
?
10/100Mbps Ethernet
CPU: Pentium 4 1GHz processor or above
Memory: 256MB RAM or above/ 512MB RAM or above (Windows Vista)
VGA Resolution: 800 x 600 or above
Web Brower: Internet Explorer (6.0 or higher)
Windows 2000/XP/Vista
Application
English
2
Modem
Internet Camera Server
(TV-IP110)
Cable/DSL 4-Port
Broadband Router
(TW100-S4W1CA)
Notebook with PC Card
(TE100-PCBUSR)
Internet
10/100Mbps
Wireless Internet Camera Server
(TV-IP110W)
Wireless G Firewall Router
(TEW-432BRP)
54Mbps
Modem
Notebook with
Wireless G PC Card
(TEW-421PC)
Internet
2. Hardware Installation
English
3
1. Attach the Antenna. (TV-IP110W)
3. Connect the AC Power Adapter to
the Internet Camera Server and
then to a power outlet.
4. Verify the Power and Link LEDs
are on. (TV-IP110W shown here)
2. Connect a RJ-45 network cable
from a Switch/Router to the
Ethernet port of the Internet
Camera.
English
4
1. Insert the Utility CD-ROM into your
CD-ROM drive and then click IP
Setup.
3. Configure the Internet Camera
Note: It is recommended that you configure the Internet Camera from a wired
computer. Since the Internet Camera's default IP address is 192.168.10.30,
make sure no other network devices are assigned an IP address of
192.168.10.30.
3. Go to Start -> Programs ->
TRENDnet -> IPSetup and click
IPSetup.
2. Follow the Installation Wizard
instructions and then click Close.
4. Select the Internet Camera and
click Change IP.
English
5
6. Click OK and wait 30 seconds.
5. Configure the IP address to be in
the same subnet as your network,
type in the Administrator ID and
Password and click Change. By
default:
ID: admin
Password: admin
7. Click OK.
8. Double click the Internet Camera to
access the browser configuration.
11. Click Install.
9. Enter the User name and
Password, and then click OK.
User Name: admin
Password: admin
10. Right click and select Install
Active X Control.
12. Click Network and then click
Wireless. Configure your
wireless settings to match your
wireless network's settings and
then click Apply (Enable/Enter
the WEP/WPA key when your
wireless network is encrypted.
Contact your network
administrator for more
information). (TV-IP110W only)
English
6
English
7
13. Disconnect the RJ-45 cable and
unplug the power. Then plug the
power back in (TV-IP110W).
14. Verify the Power and Link LEDs
are on.
15. Click Live View.
Note: For detailed information regarding the TV-IP110/ 110W configuration
and advanced settings, please refer to the Troubleshooting section, User's
Guide on the Utility CD-ROM, or TRENDnet's website at
http://www.trendnet.com.
TV-IP
Your installation is now complete.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet
Note: The TV-IP110W will not work wirelessly until you disconnect the Ethernet
cable from the back of the camera.
Q1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Q5:
A5:
Q6:
A6:
The Image is blurry. How can I adjust the focus on the Internet camera?
You can adjust the Internet Camera’s focus by rotating the lens.
How do I configure TCP/IP settings on my computer?
When I click on Live View the image does not load?
First, make sure that you are using a browser that supports Java. Second, make sure
that Java is installed. Third, make sure that you added Active X. See step 10 and 11 in
Section 2: Configure the Internet Camera.
How do I connect the TV-IP110W to my wireless router or access point?
Make sure that you configure the camera to have the same SSID, encryption mode and
key (if enabled). Follow the instructions in section 2 to configure the camera with the SSID
and encryption key.
After I successfully configured the TV-IP110W to match my wireless network settings, I
can not connect to the camera.
First, verify that the wireless settings match your wireless network settings. Second,
verify in the wireless section of the browser configuration that the Enable option is checked.
Third, make sure to disconnect the Ethernet cable from the camera and verify that the LINK
LED is blinking green.
I forgot my password. What should I do?
Take a pin or paperclip and press the reset button on the back of the unit for 15 seconds.
This will return settings back to factory defaults. The default IP address is 192.168.10.30.
The default administrator ID and password is admin.
If you still encounter problems or have any questions regarding the TV-IP110/TV-IP110W, please
contact TRENDnet’s Technical Support Department.
8
Troubleshooting
1. Go into the Control Panel and double-click
the Network Connections icon, and then
right-click the Local Area Connection icon
and then click Properties.
2. Click Internet Protocol (TCP/IP) and then
click Properties. Then click on Use the
following IP address, and make sure you
assign your network adapter an IP address
in the subnet of 192.168.10.x.
Andere Handbücher für TV-IP110W - Wireless Internet Camera Server...
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere TRENDnet Sicherheitskamera Handbücher
TRENDnet
TRENDnet TV-IP311PI Bedienungsanleitung
TRENDnet
TRENDnet TV-IP300 Bedienungsanleitung
TRENDnet
TRENDnet TV-IP301 - ProView Advanced Day/Night Internet Surveillance... Bedienungsanleitung
TRENDnet
TRENDnet TV-IP410WN Bedienungsanleitung
TRENDnet
TRENDnet TV-IP512WN - ProView Wireless N Internet Surveillance... Bedienungsanleitung
TRENDnet
TRENDnet TV-IP302PI Bedienungsanleitung
TRENDnet
TRENDnet TV-IP201P Bedienungsanleitung
TRENDnet
TRENDnet TV-IP422 Bedienungsanleitung
TRENDnet
TRENDnet TV-IP252P - SecurView PoE Dome Internet Camera... Bedienungsanleitung
TRENDnet
TRENDnet TV-IP311PI Bedienungsanleitung
TRENDnet
TRENDnet TV-IP300 Bedienungsanleitung
TRENDnet
TRENDnet TV-IP201P Bedienungsanleitung
TRENDnet
TRENDnet TV-IP662WI Bedienungsanleitung
TRENDnet
TRENDnet TV-IP422WN Bedienungsanleitung
TRENDnet
TRENDnet TV-IP262PI Bedienungsanleitung
TRENDnet
TRENDnet TV-IP110 - SecurView Internet Surveillance... Bedienungsanleitung
TRENDnet
TRENDnet TV-IP100-N Bedienungsanleitung
TRENDnet
TRENDnet TV-IP501W Bedienungsanleitung
TRENDnet
TRENDnet TV-IP212W - Wireless Internet Camera Server Bedienungsanleitung
TRENDnet
TRENDnet TV-IP313PI Bedienungsanleitung
