Tripp Lite B126-1A1-POC Bedienungsanleitung

Owner’s Manual

HDMI + Power over Cat5

Active Extender Kit

Model: B126-1A1-POC

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an ISOBAR6ULTRA

surge protector—a $100 value!

www.tripplite.com/warranty

15-12-242-933539-EN.indd 1 1/8/2016 1:51:32 PM

Product Features

Package Includes

Optional Accessories

• Extends a 1080p (@ 60 Hz) signal up to 125 ft. from source

• Built-in Power over Cable (POC) technology powers receiver over

Cat5e/6/6a cable

• Additional HDMI port on transmitter for connecting local display

• Built-in equalization control on receiver for adjusting video image

• Includes hardware for mounting both units on wall, rack or pole

• Supports up to 7.1-channel surround sound audio

• HDCP and 3D compatible

• Plug and play—no software or drivers necessary

• B126-1A1-POC Transmitter Unit

• B126-1A1-POC Receiver Unit

• External Power Supply with NEMA 1-15P Plug

(Input: 100–240V, 50/60 Hz, 0.5A; Output: 5V, 2A)

• Screwdriver for Equalization Adjustment

• Mounting Hardware

• Owner’s Manual

• N202-Series Cat6 24 AWG Solid-Wire Patch Cables

• P568-Series High-Speed HDMI Cables

• P569-XXX-LOCK* High-Speed HDMI Cables with Ethernet and Locking

Connectors

* Available in lengths up to 15 ft. XXX refers to length

(e.g. 006 = 6 ft., 015 = 15 ft., etc.)

15-12-242-933539-EN.indd 2 1/8/2016 1:51:32 PM

Mounting Instructions

The B126-1A1-POC comes with mounting hardware that allows it to be

mounted in a variety of ways. The following images show the different ways

the included mounting brackets can be attached for different mounting

methods.

Wall-Mount

19-Inch Rack-Mount Pole-Mount

15-12-242-933539-EN.indd 3 1/8/2016 1:51:34 PM

Extender Kit Installation

Notes:

1. Test to make sure the entire installation works properly before pulling cables

through ceilings or walls.

2. To achieve maximum distance and performance, use 24 AWG solid-wire Cat5e/6

cable. Using stranded-wire Cat5e/6 cable or cable with a gauge (AWG) size higher

than 24 AWG will result in shorter extension distance. Higher gauge cabling, such

as 26 AWG, has a more limited transmission capability than lower gauge cabling.

All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.

3. Press the Audio button on the transmitter to switch between stereo and

7.1-channel surround sound audio. The unit is set to transmit stereo by default.

OPTIONAL

LOCAL MONITOR

LOCAL TRANSMITTER

Up to 125 ft. at 1080p (60Hz)

REMOTE RECEIVER

Blu-ray™ PLAYER

LOCALAUDIO INPUT OUTPUT

OUTPUT

1. Make sure the HDMI source is turned OFF.

2. Connect the HDMI source to the INPUT port on the transmitter.

3. Optional: Connect a local monitor to the LOCAL port on the transmitter.

4. Connect the external power supply to the transmitter, and plug it into a

Tripp Lite surge protector, power distribution unit (PDU) or

uninterruptible power supply (UPS). The green RJ45 LED lights to

indicate the unit is receiving power.

15-12-242-933539-EN.indd 4 1/8/2016 1:51:35 PM

Extender Kit Installation

5. Using a Cat5e/6 cable, connect the RJ45 port on the transmitter to the

RJ45 port on the receiver. The green RJ45 LED on the receiver lights to

indicate the unit is receiving power. The orange RJ45 LED lights to

indicate the unit is connected to a transmitter that is powered on.

6. Connect the receiver’s HDMI port to a monitor.

7. Turn on the power to the HDMI source. The orange RJ45 LED on the

transmitter lights to indicate a signal is being received from the source.

8. If necessary, adjust the video image using the included screwdriver and

the equalization control on the receiver.

Note: An improper equalization setting can cause the monitor not to display an

image at all. Try each equalization setting until an acceptable image is displayed.

Troubleshooting

If you are unable to get an acceptable image after following the installation

instructions, try the troubleshooting tips below.

1. Is the external power supply that came with the product

connected and plugged into a working power source? For the

product to function properly, it must be connected to and receiving

power from the external power supply.

2. Was the power to the HDMI source turned off prior to

installation? If not, restart it.

3. What resolution are you trying to reach? See the Product Features

and Installation sections in this manual for details on maximum

distance and resolution. The shorter the extension distance, the higher

the resolution you will be able to obtain. If you are not able to receive

an acceptable image, try lowering your computer’s video resolution or

adjusting the refresh rate.

4. What type of cabling are you using? Inferior cabling can result in

poor performance, so it is important you use cables that can support

the video resolution you are trying to obtain. To achieve maximum

distance and resolution, 24 AWG solid-wire UTP cable (such as

Tripp Lite’s N202-Series cables) must be used.

15-12-242-933539-EN.indd 5 1/8/2016 1:51:35 PM

Troubleshooting

5. Test your cables to ensure they are working properly. For example,

connect your Cat5e/6 cable between a computer and a network to

verify it establishes a network connection.

6. Do you have any patch panels or other devices between the

transmitter and receiver units? Tripp Lite’s HDMI + Power over Cat5

Active Extender Kit is designed to connect directly from the transmitter

to the receiver via UTP cable. The more connection points that are

between the source and the remote monitor, the more likely that signal

degradation will occur, causing poor performance. If you have a patch

panel or other device between, it should be removed from the

installation.

7. Do you have a splitter, switch or other device between the

computer and transmitter or between the receiver and display?

Tripp Lite’s HDMI + Power over Cat5 Active Extender Kit is designed for

the transmitter to connect directly with the source computer and for the

receiver to connect directly to the display. If you have a splitter, switch

or other device between, it should be removed from the installation.

8. Check your cabling for any damages that may have occurred

during installation. If a cable connector is loosened from being pulled

through ceilings/walls or the cable jacket is damaged, causing the

wiring to be exposed, you will not be able to achieve maximum

performance.

9. Are the transmitter and/or receiver units located in an area that

exposes them to elevated temperatures? If the product is

overheating, it will not function properly.

15-12-242-933539-EN.indd 6 1/8/2016 1:51:35 PM

Warranty and Product Registration

1-YEAR LIMITED WARRANTY

TRIPP LITE warrants its products to be free from defects in materials and workmanship for

a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this

warranty is limited to repairing or replacing (at its sole option) any such defective products. To

obtain service under this warranty, you must obtain a Returned Material Authorization (RMA)

number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be

returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges

prepaid and must be accompanied by a brief description of the problem encountered and proof

of date and place of purchase. This warranty does not apply to equipment, which has been

damaged by accident, negligence or misapplication or has been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid

limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT,

INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE

USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Speciﬁcally, TRIPP LITE is not liable for any costs, such as lost proﬁts or revenue, loss of

equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by

third parties, or otherwise.

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You'll be

automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

15-12-242-933539-EN.indd 7 1/8/2016 1:51:35 PM

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

15-12-242 • 93-3539_RevA

Warranty and Product Registration

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modiﬁcations to this equipment not expressly approved by Tripp Lite could void

the user’s authority to operate this equipment.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and

implementing regulations, when customers buy new electrical and electronic equipment

from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies

depending on the country)

• Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause the failure of the life support equipment or to signiﬁcantly affect its safety

or effectiveness is not recommended. Do not use this equipment in the presence of a ﬂammable

anesthetic mixture with air, oxygen or nitrous oxide.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without

notice.

15-12-242-933539-EN.indd 8 1/8/2016 1:51:35 PM

Inhaltsverzeichnis

Andere Tripp Lite Extender Handbücher

Tripp Lite

Tripp Lite B127-1A1-CH Bedienungsanleitung

Tripp Lite

Tripp Lite B130-101A-WP-1 Installationsanleitung

Tripp Lite

Tripp Lite B203-101-PNP Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1A1 Bedienungsanleitung

Tripp Lite

Tripp Lite B120-000-SL Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1A1-WHD1 Bedienungsanleitung

Tripp Lite

Tripp Lite HDMI B122-000 Bedienungsanleitung

Tripp Lite

Tripp Lite Cat5 Smart KVM Extender Bedienungsanleitung

Tripp Lite

Tripp Lite B125-150 Bedienungsanleitung

Tripp Lite

Tripp Lite B136-004 Bedienungsanleitung

Tripp Lite

Tripp Lite B127-1A1-DH Bedienungsanleitung

Tripp Lite

Tripp Lite B126-1A0-U Bedienungsanleitung

Tripp Lite

Tripp Lite B150-1A1-DVI Bedienungsanleitung

Tripp Lite

Tripp Lite B130-101-2: B130-101A-2 Bedienungsanleitung

Tripp Lite

Tripp Lite B126-2P2M-POC Bedienungsanleitung

Tripp Lite

Tripp Lite NPOE-EXT-1G30 Bedienungsanleitung

Tripp Lite

Tripp Lite B130-101-2 Bedienungsanleitung

Tripp Lite

Tripp Lite B013-330 Bedienungsanleitung

Tripp Lite

Tripp Lite B140-002-DD Bedienungsanleitung

Tripp Lite

Tripp Lite B132-004 Bedienungsanleitung

Tripp Lite

Tripp Lite B132-100 Bedienungsanleitung

Tripp Lite

Tripp Lite BHDBT-K-E3SI-ER Bedienungsanleitung

Tripp Lite

Tripp Lite B127-1A1-WHD1 Bedienungsanleitung

Tripp Lite

Tripp Lite B203-101-PNPINT Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung