
8 of 8
21. Fit the heat shrink to the twelve-pin alarm connector.
Note:
• If required use cable ties to secure both ends of
the heat shrink.
22. Position the alarm unit and seat bridge to the frame
and tighten the four bolts to 15 N m .
23. Refit the battery as described in the service manual.
24. Reconnect the battery, positive (red) lead first.
25. Refit the seats, as described in the owner’s manual.
26. Remove the paddock stand.
27. Place the motorcycle on its side stand.
28. Complete the certificate supplied with the alarm kit
and return to the customer. The certificate of
installation must be retained by the customer as proof
of alarm fitment.
Alarm Kit Contents
Alarm unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 off
Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 off
S4 user guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 off
Quick reference guide . . . . . . . . . . . . . . . . . . . . . . . . . . .1 off
Certificate of installation. . . . . . . . . . . . . . . . . . . . . . . . . .1 off
Fitting Kit Contents List
Adhesive pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 off
Cleaning wipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 off
Reed-switch kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 off
Heat shrink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 off
Cable ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 off
Triumph/Datatool lanyard . . . . . . . . . . . . . . . . . . . . . . . .1 off
Note:
• It is a Thatcham requirement that the MIRRC
evaluation number is also shown on the
certificate of installation supplied to the
customer. This evaluation number varies from
Triumph model to model, dependent upon the
fitting kit used.
• Write the relevant MIRRC evaluation number as
indicated below onto the certificate of
installation, next to the alarm serial number.
Triumph kit
part number
Model MIRRC
evaluation
number
A9808089 Tiger Explorer TMC1-314/0609
If, after fitment of this accessory kit, you have any doubt
about the performance of any aspect of the motorcycle,
contact an authorised Triumph dealer and do not ride the
motorcycle until the authorised dealer has declared it fit
for use. Riding a motorcycle when there is any doubt as to
any aspect of the performance of the motorcycle may
result in loss of control of the motorcycle leading to an
accident.
The motorcycle must not be operated above the legal
road speed limit except in closed-course conditions.
Only operate this Triumph motorcycle at high speed in
closed-course on road competition or on closed-course
racetracks. High speed operation should only be
attempted by riders who have been instructed in the
techniques necessary for high speed riding and are
familiar with the motorcycle’s characteristics in all
conditions.
High speed operation in any other circumstances is
dangerous and will lead to loss of motorcycle control and
an accident.