Unicol PA2 Bedienungsanleitung

WARNING

Please carefully inspect the product before assembling. If you notice any apparent damage, call your

carrier claims agent and do not continue the installation until it has been reviewed. Please watch for

pinch points. Do not put your ﬁngers between moveable parts. Do not tamper with or disassemble any

spring loaded parts. Before installing, make sure that the supporting surface will support ﬁve times the

combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also

layout all components to ensure that you have all of the required parts before proceeding (see BOM list

on following page). Use of this product for anything other than its speciﬁed use may result in failure or

personal injury. This product is intended for indoor use only. We recommend using a qualiﬁed trades

person for installation. Use an assistant or lifting equipment to lift and position products.

For support, please call: +44 (0)1865 767676 or email: [email protected]

Revised 15/12/20

01865 767676

[email protected]

www.unicol.com

*Please check model speciﬁc details before installing*

PA2 / PA9

Screen Size: 40-80” Guide Max. Weight: 80kg

01865 767676

[email protected]

www.unicol.com

2Revised 15/12/20

COMPONENTS

INSTALLERS REQUIRED

1-2

# DESCRIPTION QTY

1Parabella Base 1

2C15230 Mounting Plate 1

3Mount Back Plate 1

4Mount Arms 2

5Parabella Legs 2

6M12x25 Button Head Screws 8

7M10x20 Hex Head Screws 4

#TOOLS REQUIRED

1 8mm Allen Key

2 Pozi Head Screwdriver

3 17mm Spanner

01865 767676

[email protected]

www.unicol.com

Revised 15/12/20

STEP 1

The unit is supplied with a power cable with a kettle

plug & socket along its length. Use this to thread

the cabling down the Parabella’s legs and through

the base.

STEP 2

With legs laying on a ﬂat surface (as shown above)

pick up the base with the help of another person

and offer the base to the mast. Ensure ﬁxing holes

are aligned and then secure.

STEP 3

Fix the C15230 mounting plate to the top of the

legs using M12x25 screws.

STEP 4

Line the back plate up with the mounting plate,

as shown above. Fix 4 M10x20 screws from behind

the mount adapter and into the 4 rivet nuts located

on the back plate. Ensure back plate is secure and

screws are tightened.

01865 767676

[email protected]

www.unicol.com

Revised 15/12/20

STEP 5

Utilising the tag locks and ﬁxing pack provided with

your mount, attach the arms to the back of your

screen.

Ensure the arms are the correct way up before

tightening - the ‘hook’ part of the arm should be at

the top.

STEP 6

Using another team member, lift the screen up and

gradually offer it up to the back plate. Gently tilting

the screen forward, hook the arms over the lip of

the back plate and lower once in position.

Centre the screen horizontally by sliding from side

to side until you are happy with the position.

STEP 7

Once centered, ensure the bottom screws are not

screwed tight and screw down the top screws to

level the screen. Once level tighten bottom screws

to secure the mount. ALT: If using tilting arms, this

is when you can adjust them to suit.

Note that you won’t be able to adjust the screens

position after the screws have been tightened.

STEP 8 [OPTIONAL]

To ﬁtting a shelf, angle it as you offer it up to the

stand to allow the rear clips to ﬁt between the legs.

Level out and lower into position, ensuring both

sides securely slot into place.

Dieses Handbuch passt für folgende Modelle

Andere Unicol Rack & Stand Handbücher

Unicol

Unicol GKUX Bedienungsanleitung

Unicol

Unicol AX12P Bedienungsanleitung

Unicol

Unicol RH200HD Bedienungsanleitung

Unicol

Unicol SBM Bedienungsanleitung

Unicol

Unicol pozimount PZX Bedienungsanleitung

Unicol

Unicol VERTISLIDE VTS1 Bedienungsanleitung

Unicol

Unicol KP Kit Bedienungsanleitung

Unicol

Unicol ODS DOUBLE SIDED KIOSK Bedienungsanleitung

Unicol

Unicol ADAPTA-WALL VWP0 Bedienungsanleitung

Unicol

Unicol AXIA TITAN Bedienungsanleitung

Unicol

Unicol Parabella Bedienungsanleitung

Unicol

Unicol AZENITH VSX1800SC Bedienungsanleitung

Unicol

Unicol GYROLOCK Bedienungsanleitung

Unicol

Unicol AV2X2T Bedienungsanleitung

Unicol

Unicol RH100 Bedienungsanleitung

Unicol

Unicol VS1000 Bedienungsanleitung

Unicol

Unicol TVV1 Bedienungsanleitung

Unicol

Unicol Powalift Bedienungsanleitung

Unicol

Unicol NEC W32-65L Bedienungsanleitung

Unicol

Unicol AVECTA TWIN SCREEN ACHP Bedienungsanleitung

Unicol

Unicol PZW TILTING MOUNT Bedienungsanleitung

Unicol

Unicol ODH Bedienungsanleitung

Unicol

Unicol NST1 Bedienungsanleitung

Unicol

Unicol WB0 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung