US Robotics USR5417 Bedienungsanleitung

Wireless MAXg PCI Adapter

Installation Guide

Guide d'installation

Installationsanleitung

Guida per l’installazione

Guía de instalación

Installatiegids

R24.0511.00

U.S. Robotics Wireless MAXg PCI Adapter Installation............................1

Installation de l'adaptateur U.S. Robotics Wireless MAXg PCI Adapter...15

Installation des U.S. Robotics Wireless MAXg PCI Adapters ...................29

Installazione di U.S. Robotics Wireless MAXg PCI Adapter......................43

Instalación del Wireless MAXg PCI Adapter de U.S. Robotics..................57

Installatie van de U.S. Robotics Wireless MAXg PCI Adapter...................71

U.S. Robotics Wireless

MAX

g PCI Adapter Installation

Package Contents:

Note: You must have administrator rights on your computer in order to install this

product.

Prepare for installation

During the Installation procedure, you may be prompted for your Windows Operating system CD-

ROM. Make sure you have it available in case you need it.

For the most updated information, visit: http://www.usr.com/support

You can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for more detailed

information.

Be sure to find out what letter your CD-ROM drive uses before you begin installing your new

product. You will need to know this to properly install your software.

If you are installing only a Wireless MAXg PCI Adapter, go to the

section entitled Installing JUST the Wireless MAXg PCI Adapter.

Installing BOTH a Wireless MAXg PCI Adapter and the

Wireless MAXg Router

Step One: Connect the Wireless

MAX

g Router

A. Turn off your computer and your cable or DSL modem. Dis-

connect the modem’s Ethernet cable from your computer

and connect it to the WAN port of the Wireless MAXg

Router.

B. Connect the supplied Ethernet cable to the Network Interface Card of your computer and to

one of the LAN ports of the Wireless MAXg Router.

C. Connect the antenna to the Wireless MAXg Router.

D. Connect the power adapter to the Wireless MAXg Router and to a standard wall power out-

let. Turn on your computer.

USR5417 Wireless MAXg PCI Adapter Detachable antenna

Quick Installation Guide Installation CD-ROM which includes User Guide

E. Turn on your cable or DSL modem.

Note to UK Users: Attach the correct power plug to the power adapter.

Note: You have finished connecting the Wireless MAXg Router and will now need to install

the Wireless MAXg PCI Adapter.

Step Two: Install the Wireless

MAX

g PCI Adapter

A. Insert the PCI Adapter Installation CD-ROM into the CD-ROM drive of the computer you are

installing the PCI Adapter in. The Installation CD Graphical User Interface (GUI) will appear on

your screen. If prompted, select your preferred language.

Note: If your CD-ROM does not automatically launch, click Windows Start, Run, type

D:\setup (if your CD-ROM drive uses a different letter, type that letter in place of “D”), and

click OK.

B. Select your product and then click Installation.

C. Follow the on-screen instructions. When prompted, turn off your computer and remove the

computer’s cover.

D. With the computer turned off, locate an available PCI slot

and insert the Wireless MAXg PCI Adapter. (PCI slots are

typically white plastic, lined with metal, and are 3.5 inches

long.)

E. Replace the computer’s cover. Turn on your computer.

Note: You will need to attach the antenna after you have placed the Wireless MAXg PCI

Adapter into the PCI slot. Use firm pressure to seat the Wireless MAXg PCI Adapter

properly. If you experience any problems inserting the Wireless MAXg PCI Adapter, try

inserting it in a different PCI slot.

Note: You may receive a “Digital Signature Not Found” or “Windows Logo testing” screen.

Click Yes or Continue Anyway. U.S. Robotics has thoroughly tested this driver in

conjunction with the supported hardware and has verified compatibility with Windows

2000, Me, and XP. Because U.S. Robotics wants its customers to take full advantage of the

network card’s functionality, it has made the drivers available.

F. Follow the on-screen instructions to continue the installation process.

G. Click Next to begin the wireless setup procedure. If prompted, restart your computer.

Step Three: Set up a Wireless Network

A. When you are prompted, select Configure a new U.S. Robotics Wireless MAXg Router and

click Next. You will need to wait while the PCI Adapter communicates with the router.

B. If prompted, select your Internet Connection type and click Next. Depending on the type of

Internet Connection that you choose, you may need to enter some additional information.

C. Enter a Network name and a Pass phrase (also known as network key) for your wireless

encryption and click Next. You will need to wait while the router and the PCI Adapter are

configured.

Note: U.S. Robotics recommends that you enable WPA so that your wireless network is

secure. Make sure you assign the same secret WPA key to all your wireless devices to

ensure network connectivity. For more information about this and additional wireless

parameters, refer to the User Guide on the U.S. Robotics Installation CD-ROM.

D. When prompted, enter a User name and Password for the router login and then click Next.

Wait while the configuration continues.

E. You will then see a screen that shows you the settings for your Wireless MAXg Router. These

settings will be saved to a text file on your computer desktop and you have the option to

print them out if your computer is connected to a printer. When you are finished looking at

this information, click Finish. Your Wireless MAXg Router and PCI Adapter should all be con-

figured and ready for use.

Congratulations! You have finished installing your product! The Wireless

MAX

g PCI Adapter

should be connected to the wireless network that you set up.

If you experience any problems connecting to a wireless network, refer to the Troubleshooting

section in this guide or to the Configuration section of the User Guide on the U.S. Robotics

Installation CD-ROM for more information.

Opening the Configuration Utility

You should now see a small icon for the Configuration Utility in the system tray by your clock on

your computer desktop. You can open the Configuration Utility in two ways:

• Right-click the icon and click Open Utility.

• Left-click once on the Utility icon to open the quick connect screen. In the quick connect

screen, you can select an available network and enter the Network key, if applicable. Click

Connect to establish a wireless connection. You can also click Advanced to open the full

Configuration Utility.

The Configuration Utility is used to change or verify the configuration information that relates to

your Wireless MAXg PCI Adapter. The Configuration Utility icon will be colored to indicate the

status of your wireless network: red for disconnected and green for connected with good quality.

Installing JUST the Wireless MAXg PCI Adapter

Step One: Install the driver and the Wireless

MAX

g PCI Adapter

A. Insert the Installation CD-ROM into your CD-ROM drive. The Installation CD Graphical User

Interface (GUI) will appear on your screen. If prompted, select your preferred language.

Note: If your CD-ROM does not automatically launch, click Windows Start, Run, type

D:\setup (if your CD-ROM drive uses a different letter, type that letter in place of “D”), and

click OK.

B. Select your product and then click Installation.

C. Follow the on-screen instructions. When prompted, turn off your computer and remove the

computer’s cover.

D. With the computer turned off, locate an available PCI slot

and insert the Wireless MAXg PCI Adapter. (PCI slots are

typically white plastic, lined with metal, and are 3.5 inches

long.)

E. Replace the computer’s cover. Turn on your computer.

Note: You will need to attach the antenna after you have placed the Wireless MAXg PCI

Adapter into the PCI slot. Use firm pressure to seat the Wireless MAXg PCI Adapter

properly. If you experience any problems inserting the Wireless MAXg PCI Adapter, try

inserting it in a different PCI slot.

Note: You may receive a “Digital Signature Not Found” or “Windows Logo testing” screen.

Click Yes or Continue Anyway. U.S. Robotics has thoroughly tested this driver in

conjunction with the supported hardware and has verified compatibility with Windows

2000, Me, and XP. Because U.S. Robotics wants its customers to take full advantage of the

network card’s functionality, it has made the drivers available.

F. Follow the on-screen instructions to continue the installation process.

G. Click Next to begin the wireless setup procedure. If prompted, restart your computer.

Step Two: Connect to a Wireless Network

A. When you are prompted, select Connect to an established wireless router and click Next.

You will need to wait while the Wireless MAXg PCI Adapter communicates with the router.

B. A list of available wireless networks will appear on the “Connect to Existing Router or Access

Point” screen.

C. Select the appropriate wireless network and click Next.

Note: If the device does not appear in the list, you can enter the name of the network

under Network name. One reason the device may not appear is if Broadcast Network

name is disabled in your wireless router or access point. You can also click Detect and

your Wireless MAXg PCI Adapter will search the area again for available wireless

networking devices.

D. Configuration information for that network will appear. If the network specified is not secure,

the “Installation Complete” screen will appear. Click Finish. If you have specific security settings

enabled on the wireless network you will be connecting to, such as WEP or WPA2, you will need to

select your security type and click Next. Enter the appropriate security information on the next

screen and click Next.

E. Click Finish. If prompted when the setup is complete, restart your computer.

Congratulations! You have finished installing your product! The Wireless MAXg PCI Adapter

should be connected to the wireless network that you selected.

If you experience any problems connecting to a wireless network, refer to the Troubleshooting

section in this guide or to the Configuration section of the User Guide on the U.S. Robotics

Installation CD-ROM for more information.

Inhaltsverzeichnis

Sprachen:

Andere US Robotics PCI-Karte Handbücher

US Robotics

US Robotics USR5699C Bedienungsanleitung

US Robotics

US Robotics USR2410 Bedienungsanleitung

US Robotics

US Robotics USR5416 Bedienungsanleitung

US Robotics

US Robotics USB 3.0 PCI-E CARD Bedienungsanleitung

US Robotics

US Robotics 221 Bedienungsanleitung

US Robotics

US Robotics 5415 Bedienungsanleitung

US Robotics

US Robotics USB 3.0 PCI-E CARD Bedienungsanleitung

US Robotics

US Robotics 56K Voice Internal PCI Bedienungsanleitung

US Robotics

US Robotics USR997902A Bedienungsanleitung

US Robotics

US Robotics USR2210 Bedienungsanleitung

US Robotics

US Robotics USR2216 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

Moxa Technologies

Moxa Technologies CP-102E Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung