VarTech Systems ColorVue VT190PC Bedienungsanleitung

VT190 ColorVue User Guide 150-077

VT190 ColorVue Series

19.0” Flat Panel Series LCD Monitors

VT190PC

VT190RC

VarTech Systems Inc.

Solutions for Demanding Applications

Industrial CRT and Flat Panel Displays

User’s Guide

Read these instructions completely before attempting to operate your new Color Display.

Table Of Contents

Section Page Section Page

Section 1 Section 5

Introduction Touch screen 14

1.1 About LCD Monitors 1 5.1 Introduction 14

1.2 Product Safety Precautions 2 5.2 Installation 14

Section 2 Section 6

Display Setup Troubleshooting Tips 15

2.1 Display Features 3

2.2 Unpacking The Display 4 Section 7

2.3 Included Parts 4 Cleaning & Maintenance 16

2.4 Connecting Your Display 4

2.5 Signal Connections 4-6 Section 8

Mechanical Drawings 17

Section 3 Panel Mount Mechanical Drawings 18-19

Getting Started Rack Mount Mechanical Drawings 20

3.1 Adjusting the Display 7

3.2 Control Panel Functions 7 Section 9

3.3 OSD Adjustment 8-12 Display Specifications 21

Section 4

Display Timing 13

VT190 ColorVue User Guide 150-077

INTRODUCTION

Section

About LCD Monitors

What you gain by using an LCD monitor in your industrial controls

LCDs

are the future of display technology. Although CRTS have dropped in

cost significantly, they do not offer the performance, reliability, and

mounting options available with LCDs. LCD monitors consist primarily of

an LCD, Video Board and a Back Light video. The LCD determines to a

large extent the viewing angle, brightness and contrast. Beyond that it is

the function of the video board which converts the analog RGB (Red, Green, Blue) signals from a

standard video card to a high quality, digital RGB that the LCD can display.

Recently the video card has taken on a new role. It is the responsibility of this device to “scale” a

particular video resolution to the “native” resolution of the LCD. Simply, consider that a computer is

putting out a VGA [640x480] resolution signal, yet the LCD that is connected is an XGA

[1024x768] display. The displayed picture would be in the center 1/3 of the LCD. With the

introduction of the scaling engine. The converter will mathematically recalculate the 640x480 to

1024x768. This may sound simple but it is in fact a complex algorithm that adjusts for different

aspect ratios and pixel alignment, essentially smoothing text and graphics to produce a picture

that is pleasant to the eye.

All Vartech displays from 12.1” (800x600) to 23.1 (1600x1200) incorporate scaling engines in the

converter card.

1.1

Product Safety Precautions

⇒ Ensure that sufficient space is available around the display to provide the circulation

necessary for cooling.

⇒ Ensure that the ambient air temperature will not exceed the specified maximum

temperature.

⇒ Do not attempt to service this display yourself. The rear chassis has a seal so that non

qualified personal will not expose themselves to dangerous voltages or other risks.

⇒ To protect from electrical shock, unplug the display power supply from the wall before

moving.

⇒ Do not expose the display to direct sunlight or heat.

⇒ Do not use this display near water

⇒ Do not place any heavy objects on the power cords. Damage may cause electrical shock.

⇒ Unplug the power supply from the wall or unit if one of the following conditions exists.

⇒ Power cord or plug is damaged or frayed

⇒ Liquid is spilled into the display or the display is exposed to rain or water.

⇒ The display does not operate normally when the operating instructions are

followed.

⇒ The display has been dropped or the enclosure has been damaged.

⇒ The display exhibits a distinct change in performance, indicating a need for

service.

1.1

VT190 ColorVue User Guide 150-077

⇒ Capable of displaying unlimited colors in a continuous spectrum. The high contrast LCD

enhances the image with no geometric distortion.

⇒ The VT190 ColorVue Series directly accepts an analog 5 wire RGB with separate H/V sync.

⇒ The VT190 ColorVue Series is auto synchronous adjusting the display to the appropriate input

between VGA, SVGA,XGA, and SXGA.

⇒ The VT190 ColorVue Series is available in Panel Mount, Rack Mount, or Wall Mount industrial

packages.

⇒ The VT190 ColorVue Series is supplied with a Anti-Reflective Screen unless equipped with an

optional Touch System.

⇒ The VT190 ColorVue Series has an integrated 115/220VAC supply as standard on all models.

Section

DISPLAY SETUP

VT190 ColorVue Series Display Features

2.1

⇒ VT190RC or VT190PC LCD Monitor

⇒ 5 ft Video Cable

⇒ 10-32 Mounting Hardware. (For use with Panel Mount only)

⇒ 6 ft RS232 Touch Interface Cable (Optional when touch is installed)

⇒ CD ROM with Touch Screen Drivers (Optional when touch is installed)

⇒ Users Guide (Printed or on CD)

2.2 Unpacking and setting up your display

Your LCD monitor package will consist of the components listed below. Open shipping

container and lay all components on a flat clean surface.

2.3 What is included with your display

2.4 Connecting the Display

1. Connect all cables to the computer first. This would include the VGA cable and the optional

RS 232 serial touch screen connection.

2. After connecting the cables between the LCD monitor and the computer, plug the power

cord into the 115/220VAC power outlet.

3. Once the 115/220VAC connection is made, the display is active.

4. If your computer was off, turn on your computer.

5. Your display should now operate as a normal computer display showing your windows or

whatever video is being sent to the flat panel.

Note: If for any reason the display goes blank and gives an “out of Range” or “No Input Signal”,

your computer or video source is putting out a signal that is out of range of the LCD’s video

board. If this happens, reboot the computer or video source and make sure you are inputting

the correct signal. If the display doesn’t work properly, it may be because:

(a) The resolution is to high or low for the LCD.

(b) The refresh rate is set to high. Refresh on an LCD is different than a CRT. Set the refresh to

60Hz. CRT’s need a high refresh rate to avoid flicker. The refresh rate has no impact on

LCD’s.

(d) The unit is malfunctioning. If you believe this to be true, disconnect the video cable from the

rear of the LCD and connect to a known good computer CRT display. If the computer

display is working satisfactory and the video is within the appropriate range, then contact

Vartech Customer service for a RMA number at 800-223-8050.

2.5 Signal Connections

To avoid irregular operation and /or damage to the display, please insure correct video is being

supplied as shown on the following page.

VT190 ColorVue User Guide 150-077

2.5 Signal Connections Cont.

You can use an HD-15 connector cable or a BNC adapter cable to connect the flat

panel monitor to the host computer. The HD-15 video cable (supplied in the kit) you

use with this monitor is equipped with a conventional HD-15 connector at each end.

HD-15 Video Connector

The following table provides the pin numbers and

corresponding pin assignments for the HD-15 video

connector.

Note: The following figure is the view looking into the pin end of the male connector or

solder term end of the female connector.

Pin Signal (DVI-I) Pin Signal (DVI-I) Pin Signal (DVI-I)

1 T.M.D.S. Data2- 9 T.M.D.S. Data1- 17 T.M.D.S. Data0-

2 T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+

3 SGND 11 SGND 19 SGND

4 Not used 12 Not used 20 Not used

5 Not used 13 Not used 21 Not used

6 DDC Clock 14 DDC Power 22 SGND

7 DDC Data 15 Ground 23 T.M.D.S. Clock+

8 Not used 16 Hot Plug Detect 24 T.M.D.S. Clock-

Pin Signal (DVI-I)

C1 Not Used

C2 Not Used

C3 Not Used

C4 Not Used

C5 Not Used

DVI-I Connector (Digital / Analog)

Pin Signal (HD15) Pin Signal (HD15) Pin Signal (HD15)

1 Red Video 6 Red Video Ground 11 Monitor Ground

2 Green Video 7 Green Video Ground 12 DDC data

3 Blue Video 8 Blue Video Ground 13 Horizontal Sync

4 Not Used 9 +5 V 14 Vertical Sync

5 Ground 10 PC detection 15 DDC clock

1 8

C4C3

Optional BNC Adaptor Cable

An HD-15 to 5-BNC adapter cable is available. The functions of the cables are

described below.

⇒ R, B, and G: Red, Green, and Blue input connectors to establish color.

These are used for RS-343 analog signals.

⇒ HS: Separate horizontal sync signal from the video source.

⇒ VS: Separate vertical sync signal from the video source.

2.5 Signal Connections Cont.

VT190 ColorVue User Guide 150-077

Control Function

POWER

Use this button to enter or exit the

On Screen Display.

SEL

Use this button to enter a selection in

the On Screen Display.

Use these button to choose or adjust

items in the On Screen Display.

Use this button to turn the monitor on

and off.

Adjusting the display

Getting Started

Section

The VT190 Series display has an embedded microprocessor in the converter card.

Once you have the unit displaying the resolution you desire for your application do

the following:

In order to navigate to the appropriate adjustments, press Menu and the OSD layout

chart will appear as indicated in Fig. 1 from left to right.

If you press the “MENU” the new settings are saved and the OSM appear and your

setting will be stored in the unit’s non volatile memory.

3.1

Control Panel Functions

3.2

1 2 43

3.3 On Screen Display (OSD) Control Adjustment

Screen Adjustment Operation Procedure

1) Entering the Screen Adjustment

The setting switches are normally at stand-by. Push the MENU button once to dis-

play the main menu of the screen adjustment. The adjustable items will be dis-

played in the main menu.

2) Entering the Settings

Use the Adjust ▼and Adjust ▲buttons to select the desired setting icon and push

the SELECT button to enter sub-menu.

3) Change the Settings

After the sub-menu appears, use the Adjust ▼and Adjust ▲buttons to change the

setting values.

4) Save

After completing the adjustment, push the SELECT button to save the setting.

5) Return & Exit the Main Menu

Exit the screen adjustment, push the ‘SELECT’ button and the ‘EXIT’ of “MISC

MENU”. When no operation is done around 60 sec (default OSD timeout), it goes

back t the stand-by mode and no more switching is accepted except MENU to

restart the setting.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere VarTech Systems Monitor Handbücher

VarTech Systems

VarTech Systems VTPC2100VS Bedienungsanleitung

VarTech Systems

VarTech Systems VT213C Bedienungsanleitung

VarTech Systems

VarTech Systems VT181R2 Bedienungsanleitung

VarTech Systems

VarTech Systems VT320D Bedienungsanleitung

VarTech Systems

VarTech Systems VT170W Bedienungsanleitung

VarTech Systems

VarTech Systems VT150CHB Bedienungsanleitung

VarTech Systems

VarTech Systems GDM-5001PT Bedienungsanleitung

VarTech Systems

VarTech Systems VT084XA4 Bedienungsanleitung

VarTech Systems

VarTech Systems VT14B-C1 Bedienungsanleitung

VarTech Systems

VarTech Systems VT20A Bedienungsanleitung

VarTech Systems

VarTech Systems VT190PVS Bedienungsanleitung

VarTech Systems

VarTech Systems VT520 Bedienungsanleitung

VarTech Systems

VarTech Systems VT190P2 Bedienungsanleitung

VarTech Systems

VarTech Systems VT201CM Bedienungsanleitung

VarTech Systems

VarTech Systems VT064C Bedienungsanleitung

VarTech Systems

VarTech Systems VT121CC Bedienungsanleitung

VarTech Systems

VarTech Systems VT064P Bedienungsanleitung

VarTech Systems

VarTech Systems DiamondVue VT190C Bedienungsanleitung

VarTech Systems

VarTech Systems VT420W Bedienungsanleitung

VarTech Systems

VarTech Systems VT14A-D Bedienungsanleitung

VarTech Systems

VarTech Systems VTPC150XPE Bedienungsanleitung

VarTech Systems

VarTech Systems VT29B-M Bedienungsanleitung

VarTech Systems

VarTech Systems VT170CM Bedienungsanleitung

VarTech Systems

VarTech Systems VT181CH Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung