VarTech Systems VT190PVS Bedienungsanleitung

Solutions for Demanding Applications

VARTECH

S Y S T E M S I N C.

19.0” Enclosed LCD

Model VT190PVS W/ARM

User’s Guide

Read these instructions completely before attempting to operate your new Enclosed LCD

19.0 Enclosed LCD 486-0021-00-00

Revision History

Date Rev No Summary Page

03/27/09 00 First Issue

19.0 Enclosed LCD 486-0021-00-00

Safety Instructions

Read the Safety Instructions carefully and keep it for use later.

The chassis metalwork of the module must be installed properly to the main earthing termination

for Class 1 equipment.

Care must be exercised in the application of the system to prevent overheating. Ensure that the

ambient temperature around the system does not exceed 50°C and provide adequate means of

ventilation to achieve this.

When cleaning cut off the electrical supply at all times. Never use liquid or aerosol detergent,

use a soft damp cloth instead.

Never insert anything metallic into the enclosure. This may create an electric shock hazard or

hazard from rotating fan blades.

To avoid electric shock, never touch the inside of the system. There are no user adjustable

components inside, only a qualified technician should open the enclosure’s case.

If the LCD does not operate normally – in particular, if there are any unusual sounds or smells

coming from it – disconnect it immediately.

Do not put pressure on the LCD panel screen because it is very fragile.

Always handle the system with care when moving it.

Take care that the system is disposed of correctly at the end of its life. If in doubt refer to your

local ordinances or regulations for proper disposal.

Cleaning the LCD monitor

To clean the LCD panel:

Wipe the screen gently with a clean lens brush made of camel hair, or a soft, clean, lint free

cloth. This is to remove dust and other particles without scratching the LCD panel.

If it is still not clean, then wipe with a damp lint free cloth and blow on it to dry.

Desirable cleaners are water, IPA (Isopropyl Alcohol) or Hexane.

Do not clean the panel with a Ketone type material (e.g. Acetone), or Ethyl alcohol, Toluene, Ethyl

acid, Methyl chloride. These may permanently damage the polarizer due to chemical reaction.

Do not apply pressure to the LCD panel.

19.0 Enclosed LCD 486-0021-00-00

Standard Technical Specifications:

LCD Monitor:

Size / Type 19.0” XGA TFT LCD

Native Resolution 1280 x 1024

Contrast Ratio 1000:1

Viewing Angles Horizontal: 178°

Vertical: 178°

Pixel Pitch 0.294mm

Brightness (typical) 250 cd/m²

Response Time (typical) 12ms

Colors Supported 16.7 million

Touch Screen:

Touch Screen Resistive

Touch Screen Interface Standard: Serial

Environmental:

Power Input 100-240 VAC 1.5A 50/60 Hz

Power Consumption

LCD Weight

30W

23.5 lbs

Temperature Operational: 32°F to 122°F 0°C to 50°C

Storage: -40°F to 149°F -40°C to 65°C

Humidity Operational: 0 to 90% RH NC

Storage: 0 to 95% RH NC

Installation of Your Enclosed VESA Mount PC

Packaged with each carton will be:

1 - VT190PVS W/ARM

1 - AC Power Cable

1 – Serial Touch Screen Cable

1 – VGA Cable

1 - Users Guide (Printed or on CD)

19.0 Enclosed LCD 486-0021-00-00

BEFORE MAKING ANY CONNECTIONS OR APPLYING POWER,

FIRST READ THROUGH THE ENTIRE MANUAL

Mounting Procedure

ATTACH ARM TO WALL:

ATTENTION: Ensure that the wall structure is capable of supporting four times the total weight

of the mounted equipment. Mounting to wall surfaces that do not meet these criteria may result

in an unstable, unsafe condition which could result in personal injury and/or property damage.

Vartech Systems assumes no responsibility for water or chemical damage to the monitor or

other equipment within the enclosure due to improper installation.

Product Drawing: Detail –A–

19.0 Enclosed LCD 486-0021-00-00

Connections to the Enclosed LCD:

Power Connection (Power In)

The Enclosed LCD includes an AC line cord which is 10ft long. The power input receptacle is

located on a panel mounted to the support arm of the system.

VGA Port Connection (VGA)

The Enclosed LCD is supplied with a 15-pin D-Shell connector. The cable is located on a panel

mounted to the support arm of the system.

Touch Screen Connection (TOUCH)

The Enclosed LCD is supplied with a 9-pin D-Shell serial connector configured for resistive

touch screen. The cable is located on a panel mounted to the support arm of the system.

LCD Monitor Warm-up Time

All LCD monitors need time to become thermally stable the first time you turn them on.

Therefore, to achieve more accurate adjustments for parameters, allow the LCD monitor to

warm (be on) for at least 20 minutes before making any screen adjustments.

Maintenance

The Enclosed LCD is designed to provide optimum service and performance with minimal

maintenance including the occasional external cleaning. For cleaning the Enclosed LCD

enclosure follow the suggested guidelines.

General – NEVER use abrasive cleaners or solvent-based cleaners!! Use a clean soft cloth.

The Enclosed LCD should only be opened and serviced by a qualified technician. Keep the area

around the Enclosed VESA Mount PC clear and free of excessive dirt or other contaminants.

19.0 Enclosed LCD 486-0021-00-00

For Additional Assistance

Contact Your VarTech Sales Representative

Vartech Systems, Inc.

11529 Sun Belt Ct.

Baton Rouge, LA 70809

800-223-8050

Fax: 225-297-2440

www.vartechsystems.com

Andere VarTech Systems Monitor Handbücher

VarTech Systems

VarTech Systems VT320D Bedienungsanleitung

VarTech Systems

VarTech Systems VT19B-PW Bedienungsanleitung

VarTech Systems

VarTech Systems DiamondVue VT150P Bedienungsanleitung

VarTech Systems

VarTech Systems VT121CC Bedienungsanleitung

VarTech Systems

VarTech Systems VT14A-D Bedienungsanleitung

VarTech Systems

VarTech Systems VT084XHB Bedienungsanleitung

VarTech Systems

VarTech Systems VT14B-C1 Bedienungsanleitung

VarTech Systems

VarTech Systems VT190P2 Bedienungsanleitung

VarTech Systems

VarTech Systems VTPC150XPE Bedienungsanleitung

VarTech Systems

VarTech Systems VT121 DiamondVue Series Bedienungsanleitung

VarTech Systems

VarTech Systems VT520 Bedienungsanleitung

VarTech Systems

VarTech Systems VT181CH Bedienungsanleitung

VarTech Systems

VarTech Systems VTPC2100VS Bedienungsanleitung

VarTech Systems

VarTech Systems DiamondVue VT084C Bedienungsanleitung

VarTech Systems

VarTech Systems DiamondVue VT201C Bedienungsanleitung

VarTech Systems

VarTech Systems VT064C Bedienungsanleitung

VarTech Systems

VarTech Systems VT213C Bedienungsanleitung

VarTech Systems

VarTech Systems VT121XA4 Bedienungsanleitung

VarTech Systems

VarTech Systems VT181R2 Bedienungsanleitung

VarTech Systems

VarTech Systems DiamondVue VT190C Bedienungsanleitung

VarTech Systems

VarTech Systems VT150CHB Bedienungsanleitung

VarTech Systems

VarTech Systems VT420W Bedienungsanleitung

VarTech Systems

VarTech Systems VT170W Bedienungsanleitung

VarTech Systems

VarTech Systems vt550 series Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung