Vax Power Advance VX77 Montageanleitung
LET’S GET STARTED.
VX77
CYCLONIC
BARREL
VACUUM
vax.com.au
vax.co.nz
Power Advance
VACUUM CLEANER
Let’s talk safety
Basic
safety
precautions
Don’ts
Do’s
This vacuum cleaner is intended for household use only and
NOT for commercial or industrial use.
READ ALL THE INSTRUCTIONS BEFORE USING
THIS APPLIANCE
• Only use the vacuum cleaner indoors and keep the area you’re
cleaning well lit.
• Keep ngers, hair and loose clothing from moving parts and
openings whilst using the vacuum cleaner.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities
or lack of experience and knowledge unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Don’t pull or carry by cord, use cord as a handle, close a door on
cord, or pull cord around sharp edges or corners. Do not place
product on cord. Do not run appliance over cord.
• Don’t handle the plug or use the vacuum cleaner with wet hands.
• Don’t use the vacuum cleaner with incorrect voltage as this may
result in damage or injury to the user. The correct voltage is
listed on the rating label.
• Don’t vacuum up hot coals, cigarette butts, ash, matches or
smoking hot burning items or use in an area where there may be
harmful uids (chlorine, bleach, and ammonia drain cleaner).
• Always make sure the lter and dirt container are tted
correctly before using your vacuum cleaner.
• Turn o all controls on the vacuum cleaner before
disconnecting or connecting the battery.
• Take extra care when cleaning on the stairs.
• Always switch o the vacuum cleaner before disconnecting
or connecting the hose and accessories.
• Always protect the cord from heated surfaces
or near open ames.
Children should not play with the vacuum cleaner. Cleaning and user
maintenance should not be made by children without supervision
• Only Vax recommend tools and accessories should be used with this
vacuum cleaner
• Vax recommends the use of a Residual Current Device rating of 30 mA or less.
• If the supply cord is damaged, it must be replaced by the manufacturer,
or similarly qualied person in order to avoid a hazard, or invalidating
the warranty.
• IMPORTANT: The motor is equipped with a thermal cut-out. If for any
reason the unit should overheat, the thermostat will automatically turn the
unit o. Should this occur, unplug the vacuum cleaner from the electrical
outlet and turn o the switch. Remove dirt container and empty. Clean
lters. Allow the unit to cool for approximately one (1) hour. To re-start,
plug into an electrical outlet and switch back on.
• Don’t pull or carry by cord, use cord as a handle, close a door on
cord, or pull cord around sharp edges or corners. Do not place
product on cord. Do not run appliance over cord.
• Don’t handle the plug or use the vacuum cleaner with wet hands.
• Don’t use the vacuum cleaner with incorrect voltage as this may
result in damage or injury to the user. The correct voltage is
listed on the rating label.
• Don’t vacuum up hot coals, cigarette butts, ash, matches or
smoking hot burning items or use in an area where there may be
harmful uids (chlorine, bleach, and ammonia drain cleaner).
• Don’t attempt to remove blockages with sharp objects as this may cause
damage to the vacuum cleaner.
• Don’t vacuum hard or sharp objects such as glass, nails, screws or coins etc.
• Don’t not vacuum plaster dust, concrete dust or any other building
or vitreous material.
• Don’t vacuum our, baking soda or any other powder-based carpet refresher
or deodoriser.
• Don’t use this vacuum cleaner if it has been dropped, damaged or left outdoors.
• Don’t vacuum up any ammable or combustible materials (lighter uid, petrol,
kerosene etc.) or use the vacuum cleaner in an area with explosive vapours
or liquid.
• Use only SAA approved 10amp extension cords. Care should be taken to
arrange the extension cord as it can be a trip hazard.
• Always carry the vacuum cleaner by the handle.
• Store your vacuum cleaner in a cool, dry area.
• Always keep the power cord away from the brushes whilst using your
vacuum cleaner.
PLEASE KEEP INSTRUCTIONS FOR FURTHER USE.
Thank you for buying this Power Advance Barrel Vacuum.
Taking care of your carpets and hard floors
The Power Advance Barrel Vacuum is designed to make vacuuming carpets and hard oors
regularly as eective and efficient as possible and this user guide will help you get the most out
of your machine. Maintaining your carpets will ensure they keep their appearance for longer.
You’ve chosen the carpets and hard oors for your home for a reason and Vax will help you take
good care of them.
Taking care of your Power Advance Barrel Vacuum
Also inside this guide are instructions on maintaining your new machine, so that it’s always ready
when you are to tackle your carpets and hard oors.
We’re here if you need us
For troubleshooting simply visit or call:
Australia: 1300 VAX AUS (1300 829 287)* vax.com.au
New Zealand: 0800 VAX NZL (0800 829 695)* vax.co.nz
*Monday – Friday: 8:30am -5:00pm
Calls are charged at the standard local rate. Please make note of the serial
number and model number of the product before calling.
Contents
Let’s talk safety
Getting to know your machine
Getting started
Using your machine
Taking care of your machine
What to do if it goes wrong
Getting in touch
Accessories
Notes
Power Advance Barrel Vacuum
Included with
your machine
Filters
TurboTool
Dusting brush
Crevice tool
Upholstery tool
Combination oor head
Extension tube
and tool caddy
Hard oor tool
Pre-motor lter
Hose and handle
HEPA anti-bacterial
post-motor lter
Turbobrush
Getting to know your machine
Name Power Advance Vacuum
Model VX77
Voltage 220-240V ~50Hz
Wattage 2400W
Cord length 8m
Weight 6.3kg
Dust Capacity: 4L
Technical Specification
Subject to technical change without notice.
Filter pack*
VCP7PTFLT2
Accessories & Consumables
*To purchase consumables and accessories, please visit vax.com.au Made in China.
Double
Insulated
This product
meets applicable
regulatory
requirements
Indoor
Use
Only
Read
Instructions
Carry handle
Cyclone separator and shroud
Hose connector
On/o button
Variable power dial
Floor head parking slot
Dirt container
Dirt bin release button
Cord rewind button
Wheel
Assembling your vacuum cleaner
Keep your Vax like new
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Getting started
*To purchase consumables and accessories, please visit vax.com.au Made in China.
CAUTION: Always switch o the vacuum cleaner before connecting or disconnecting the hose/attachments,
or removing and emptying the dirt container.
NOTE: The Turbobrush, hard oor tool, crevice tool, upholstery tool and dusting brush can all be attached directly
to the telescopic tube or hose handle. The TurboTool should be attached via the supplied connector.
Hard oors
Carpets
IMPORTANT: The condition of the lters aects the performance of your machine. Please check, clean and replace
lters periodically (depending on the level of use). For full cleaning instructions, see “Cleaning the pre-motor lter”
and “Cleaning the post-motor lter”.
IMPORTANT: Do not use the vacuum cleaner with blocked lters and without all of the lters in place.
Using your machine
Operating the appliance
Adjust the variable power dial to
increase or decrease the suction.
Fully unwind the power cord.
A yellow mark on the cord
indicates the recommended cord
length. Do not exceed the cord
length beyond the yellow mark.
12
Taking care of your machine
WARNING: Always switch o and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dirt container or before connecting/disconnecting the attachments.
IMPORTANT: Filters need to be cleaned every time you empty the dirt container for best cleaning results.
Do not use your vacuum cleaner with blocked lters and without ALL the lters in place.
NOTE: For convenience there is a parking slot located at the rear of the vacuum cleaner where the oor head
and tubes can be attached for storage and carrying.
Packing away and storage
Emptying and cleaning the dirt container
Taking care of your machine
12
1
2
Taking care of your machine
Taking care of your machine
IMPORTANT: Water temperature should not exceed 40°C when washing the pre-motor lter. Allow to dry
completely before replacing in the vacuum cleaner.
Cleaning the pre-motor filter
24hr
Tap to remove excess dirt for
a quick clean.
Wash when a deeper clean
is needed.
40�C max
!
!
!
!
Inhaltsverzeichnis
Andere Vax Staubsauger Handbücher
Vax
Vax V-028 Bedienungsanleitung
Vax
Vax Rapide XL Produktinformationsblatt
Vax
Vax Power5 C85-P5-Be Montageanleitung
Vax
Vax VO-7000 Bedienungsanleitung
Vax
Vax Rapide Classic V-024 Bedienungsanleitung
Vax
Vax Silentium Plus VBGSP1850 Bedienungsanleitung
Vax
Vax VMUB1900 Bedienungsanleitung
Vax
Vax H85-ACH-B Technisches Datenblatt
Vax
Vax C87-ZM-B Bedienungsanleitung
Vax
Vax Advance VX96 Bedienungsanleitung
Vax
Vax SWIFT V-106AA Bedienungsanleitung
Vax
Vax Rapide Classic V-026CC Bedienungsanleitung
Vax
Vax VCC-08 Bedienungsanleitung
Vax
Vax W87-RC-C Bedienungsanleitung
Vax
Vax Power 1 Series Bedienungsanleitung
Vax
Vax Alladin Bedienungsanleitung
Vax
Vax MACH 7 VZL-6017 Series Bedienungsanleitung
Vax
Vax MACH7 VZL-6017 SERIES Bedienungsanleitung
Vax
Vax Blade TBT3V1B1 Montageanleitung
Vax
Vax Power 2 C90-P2-H-E Bedienungsanleitung
Beliebte Staubsauger Handbücher anderer Marken
Bissell
Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung
Panasonic
Panasonic MC-YL637S147-AE Bedienungsanleitung
NEFF
NEFF N17XH10 0 Series Bedienungsanleitung
LG
LG A9 Series Bedienungsanleitung
Oreck
Oreck Cordless Captura BK51700 Series Bedienungsanleitung
Kogan
Kogan KAVACROBVWA Bedienungsanleitung
