Vax VCW-06 Bedienungsanleitung

VCW-06

Carpet Washer

User Guide

CAUTION: Read instructions before using this machine

Vax Commercial Careline: (UK) 0330 026 4275

vaxcommercial.co.uk

GENERAL SAFETY INFORMATION

2vaxcommercial.co.uk

PLEASE KEEP THESE ORIGINAL INSTRUCTIONS

FOR FUTURE REFERENCE

WARNING: Operators must be adequately instructed on the use

of this machine.

WARNING: Please read carefully before using this carpet washer.

Always fully extend the mains cable before use. Retain for

future reference.

WARNING: Always switch o and unplug your machine from the

mains before opening, emptying, conducting maintenance or trouble

shooting

checks

WARNING: Do not allow the power cable to come into contact with

the rotating brushbar.

1. This machine is for commercial use only. Ensure full compliance with all

the instructions in this user guide, paying particular attention to warnings

and danger notices. The manufacturer will not be held responsible for

injuries to persons or damage to property caused by non-compliance

with instructions.

2. Caution only use and store this machine indoors, keeping the area you are

cleaning well lit. Do not use in explosive environments, when harmful dirt

is present (dust, gas etc.), on roads or public passageways or in outdoor

environments in general.

3. Keep ngers, hair and loose clothing away from moving parts

and openings whilst using the machine.

4. This commercial machine should only be used by personnel who have

received appropriate training. Machines should not be used by children.

Children should be supervised to ensure that they do not play with the

appliance. This machine can be used by people with reduced physical,

sensory or mental capabilities or lack of experience and knowledge if they

have been given supervision or instruction concerning use of the machine

in a safe way and understand the hazards involved.

5. Before using the machine run a test on a small inconspicuous area

of carpet/rug/upholstery to check for colourfastness or pile distortion.

6. Only use Vax Commercial recommended tools, accessories and solution

with this machine. Using others may invalidate your warranty.

7. Check with carpet/upholstery manufacturer prior to using the machine

to ensure suitability.

8. Always vacuum your carpets thoroughly before carpet washing.

9. Clean water tank should be lled with clean warm water (max 40°C)

– hot or boiling water will damage the machine and invalidate warranty.

10. Use only CE approved 13 amp extension cords, as others may overheat.

GENERAL SAFETY INFORMATION

3Vax Commercial Careline: (UK) 0330 026 4275

Always replace fuse with a British 13 amp.

11. Always use machine with all water/solution tanks in place, keeping all

openings clear and free from debris, as this may aect airow/suction.

12. Take extra care when cleaning stairs.

13. Always use the machine in an upright position, never upside down

or on its side.

14. Store the machine in a cool dry area, ensuring all water/solution tanks

are thoroughly clean and dry.

15. Appropriate Personal Protective Equipment should be worn when

operating machinery to protect the user, in accordance with an

appropriate risk assessment prior to use.

16. If the power cable is damaged, it must be replaced by the manufacturer,

a service agent or similarly qualied persons in order to avoid a hazard.

17. Always unplug the carpet washer before lling, emptying or performing

maintenance checks.

DO NOT:

18. Use this machine for any other purpose than that which it is specically

designed. Evaluate the building where it will be used and comply with

the current safety regulations and conditions.

19. Leave the machine plugged in when unattended.

20. Use if the machine has been dropped, damaged or left outdoors.

21. Run over the power cable or use if the power cable or plug is damaged,

and do not handle the plug or use the machine with wet hands.

The power cable should always be protected from heated surfaces and

open ames, and kept away from brushes whilst machine is in use.

22. Leave the machine’s controls on before disconnecting the power cable.

Always store the cable using the Velcro strap to avoid a trip hazard.

23. Use the machine to pick up hot coals, cigarette butts, matches or smoking

hot/burning items, or use in an area where it may pick up harmful uids

(chlorine, bleach, ammonia etc.).

24. Use the power cable to pull or carry the machine. Do not pull the cable

around corners, sharp edges, or close a door over it. Do not unplug the

machine by pulling the cable.

25. Carry the machine while it is switched on or while the water tanks are full.

26. Attempt to remove blockages with sharp objects – this may damage

the machine.

27. Use the machine with incorrect voltage, as this may result in damage

and or user injury (the correct voltage is shown on ratings label).

Vax Commercial Careline: (UK) 0330 026 4275

This machine is intended for commercial use, for example in hotels, schools,

hospitals, factories, shops, oces and rental businesses.

Page 2-3 ............. General safety information

Page 5 ................. Machine overview

Page 6 ................. Preparation

Page 6 ................. • Initial set up

Page 7 ................. • Moving and lifting

Page 8 ................. • Filling the clean water tank

Page 9-10............ Operating the machine

Page 9 ................. • Using the carpet washer

Page 10................ • Using the hose and tools

Page 11 ................ Maintenance

Page 11 ................ • Emptying and cleaning the tanks

Page 12-13 .......... • Cleaning the brush head

Page 14................ • Removing blockages

Page 14................ • Cleaning the brushbar

Page 15................ • Replacing the belt

Page 16................ Storage & Transportation

Page 17................ Frequently asked questions

Page 18................ Service and help

CONTENTS

4vaxcommercial.co.uk

1. Handle

2. Handle height adjuster

3. Wash button

4. Dirty water tank

5. Dirty water tank handle

6. Dirty water tank lid

7. Front carry handle

8. Clean water/detergent tank

9. Brush head

10. Brush head release levers

11. Hose connector port

12. Brushbar access door

13. Cable safety hook

14. Dirty water tank latches

15. Dirty water tank drain hose

16. Handle recline pedal

17. Rear carry handle

18. On/o pedal

19. Hose

20. SpinScrub™ wash tool

21. Upholstery wash tool

22. Tool storage bag

5Vax Commercial Careline: (UK) 0330 026 4275

MACHINE OVERVIEW

1414

PREPARATION

6vaxcommercial.co.uk

Initial set up

The carpet washer will be fully

assembled in the box, simply lift out.

Pull the handle upwards until it clicks and locks into place.

IMPORTANT: Carpets should be dry vacuumed thoroughly before washing.

Check the carpet is colour fast

Before cleaning carpet/upholstery, test for colour fastness. Dampen a white cloth with solution.

Test a small area somewhere discreet. Gently rub the cloth over the area. Check each colour

for colour bleeding. If the cloth remains clean, it should be safe to clean the carpet/upholstery.

Helpful hints for cleaning carpet

1. Do not saturate carpet with water and cleaning solution when using the carpet washer.

2. For heavily soiled areas, additional applications may be necessary.

3. Allow plenty of time to dry carpet thoroughly.

4. Wipe cleaning solution from woodwork and wood to prevent any damage.

5. Try not to walk on carpet until it is completely dry.

6. After carpet is thoroughly dry, vacuum once more.

7. Ensure the power cable is hooked on the machine handle within the marked line area when in use.

Moving the carpet washer

CAUTION: Always make sure both tanks are empty or remove both tanks o the carpet washer

and refer to Manual Handling Operation Regulations before moving and lifting.

7Vax Commercial Careline: (UK) 0330 026 4275

PREPARATION

Push the handle forward to make

sure the handle is in the upright

position and locked.

Tilt the carpet washer

onto the wheels and push

forward to move.

Lift and remove the clean

water tank.

Press the handle release pedal

and push the handle forward.

Lift and remove the dirty

water tank.

Use the carry handles on the front and back to lift the carpet washer.

Lifting the carpet washer

PREPARATION

OPERATING THE MACHINE

8vaxcommercial.co.uk

Pour carpet cleaning solution into

the clean water tank. Use approx.

40ml per 1L of water.

Lift and remove the dirty

water tank.

Lift and remove the clean

water tank.

Twist the clean water tank cap

anti-clockwise and remove.

Fill the clean water tank with

warm water (max 40°C)

to ll level.

Re-t the clean water tank cap

onto the clean water tank and

twist clockwise to tighten.

Line up both tanks and replace

onto the carpet washer.

CAUTION: Always unplug the carpet washer before lling, emptying or performing maintenance checks.

IMPORTANT: Use Vax Commercial low foam carpet cleaning solution in the clean water tank

(water 40°C MAX.) Add Vax Commercial Defoamer to the dirty water tank, ensuring directions

on the label are followed.

OPERATING THE MACHINE

9Vax Commercial Careline: (UK) 0330 026 4275

Twist the handle height adjuster

forward and lift handle to the

preferred height.

Plug into mains and press the

handle release pedal. Pull the

handle backwards, and recline

to waist height.

For best cleaning results, use

slow straight parallel strokes while

squeezing the trigger. To pick up

dirty water, release the wash

button and move backwards.

Press the on/o pedal to switch

the carpet washer on.

Squeeze the wash button to

release water and solution mix.

Using the carpet washer

IMPORTANT: Carpets should be dry vacuumed thoroughly before washing.

Check the carpet is colour fast

Before cleaning carpet/upholstery, test for colour fastness. Dampen a white cloth with solution.

Test a small area somewhere discreet. Gently rub the cloth over the area. Check each colour

for colour bleeding. If the cloth remains clean, it should be safe to clean the carpet/upholstery.

Helpful hints for cleaning carpet

1. Do not saturate carpet with water and cleaning solution when using the carpet washer.

2. For heavily soiled areas, additional applications may be necessary.

3. Allow plenty of time to dry carpet thoroughly.

4. Wipe cleaning solution from woodwork and wood to prevent any damage.

5. Try not to walk on carpet until it is completely dry.

6. After carpet is thoroughly dry, vacuum once more.

7. Ensure the power cable is hooked on the machine handle within the marked line area when in use.

2 1

NOTE: If the machine

is in use and the power

supply to the machine

is cut, the machine will

automatically switch o.

When power supply is

re-connected the machine

will need to be turned on.

OPERATING THE MACHINE

MAINTENANCE

10 vaxcommercial.co.uk

Pull open the hose

connector cover.

Plug into the mains and press

the on/o switch to turn

the machine on. Handle must

be in upright position when

using tools. (Upright handle

position turns brushbar o to

prevent carpet damage).

Push the hose connector into

the hose connector port.

Press the trigger on the hose

to release a clean water/solution

mix. Squeeze the trigger on

the forward stroke to release

water and solution to clean

carpets/upholstery.

Slide the SpinScrub™ or

upholstery wash tool over the tab

at the end of the hose until

it clicks into place.

Release the trigger on the

backward stroke to pick

up dirty water. Repeat the

process for cleaning tough stains.

Using the hose and tools

CAUTION: Always unplug the carpet washer before connecting or disconnecting the hose and tools.

Use extra caution when cleaning stairs to prevent the carpet washer from tipping or falling over.

Do not leave the carpet washer on or at the top of the stairs while cleaning.

CAUTION: Always check the cleaning code on your upholstery. The carpet washer should only

be used on upholstery marked ‘W’ or ‘W/S’. Check with the upholstery manufacturer before use.

Run the wash tool over a small hidden area to test before cleaning.

Inhaltsverzeichnis

Andere Vax Staubsauger Handbücher

Vax

Vax EVERYDAY TURBO V-041 Bedienungsanleitung

Vax

Vax Mach Air U91-MA series Bedienungsanleitung

Vax

Vax Essentials VEW-01 Bedienungsanleitung

Vax

Vax Rapide Bedienungsanleitung

Vax

Vax Power Advance VX77 Montageanleitung

Vax

Vax Oasis V-130 Bedienungsanleitung

Vax

Vax U86-PM Series Bedienungsanleitung

Vax

Vax Oasis Complete V-133 Bedienungsanleitung

Vax

Vax Mach 8 Bedienungsanleitung

Vax

Vax H90-LF Series Bedienungsanleitung

Vax

Vax C91-M3 SERIES Bedienungsanleitung

Vax

Vax Astrata Power VZL-401 Bedienungsanleitung

Vax

Vax V-051 Produktinformationsblatt

Vax

Vax U88-T1 Series Bedienungsanleitung

Vax

Vax U91-LF Series Bedienungsanleitung

Vax

Vax CADENCE V-044 Bedienungsanleitung

Vax

Vax VS-022 Bedienungsanleitung

Vax

Vax VX78 Montageanleitung

Vax

Vax VZL-6013 Bedienungsanleitung

Vax

Vax AirRevolve Pet VX29 Bedienungsanleitung

Vax

Vax C88-AM-Be Bedienungsanleitung

Vax

Vax DynamoPower C85-Z2-Re Bedienungsanleitung

Vax

Vax Powermax VRS5W Bedienungsanleitung

Vax

Vax Cordless VII VX67 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung