Vaxcel T0199 Gebrauchsanweisung

151020

Headless

Screw (D) Lock Nut (E)

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read and save these instructions.

Thread two headless screws through the mounting plate, and then secure them with four lock nuts (two on each side

of the mounting plate). Adjust the length of the headless screws if necessary.

Note: Make sure that the headless screws are lined up horizontally to make the fixture level.

2. Attach the mounting plate to the outlet box by using two mounting screws.

3. Pull out the source wires from the outlet box. Make wire connections using wire nuts as follows:

---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.

---Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.

---Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting plate with the green

grounding screw, and then connect it to the house grounding wire with the wire nut.

Carefully put the wires back into the outlet box.

House Grounding Wire

Green Grounding Screw (C)

Wire Nut (F)

Mounting Screw (B)

Headless Screw (D)

Outlet Box

Fixture Wire

Lock Nut (E)

Mounting Plate (A)

Fixture Grounding Wire

Mounting Plate (A) Rubber Pad (H)

T0199

T0200

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

T0199 / T0200

Mounting Screw (B) Wire Nut (F) Ball Nut (G)

Bulb Type A Max.100W

(not included)

Bulb Type A Max.2-40W

(not included)

Rubber Pad(H)

Ball Nut(G)

Fixture

Photocell

Hardware Package (included):

Green Grounding

Screw (C)

Turn off the power at fuse or circuit box.

Installation Steps

IMPORTANT:

The sensor has an excellent photocell function

to enable the light to turn on at dusk and off at

dawn automatically.

151020

Headless

Screw (D) Lock Nut (E)

Mounting Plate (A)

T0199 T0200

Rubber Pad (G)

4. Attach the fixture to the mounting plate by inserting headless screws into holes on back plate, and then secure it

with two rubber pads and two ball nuts.

NOTE:With silicone caulking compound, caulk completely around where the back plate meets with the

wall surface to prevent water from seeping into the outlet box.

5. Install a bulb (bulbs) (not included). Check relamping label at socket area or packaging for maximum allowed wattage.

Turn on the power at fuse or circuit box.

A: 7"

B: 4-7/8"

C: 4"

The following parts are available for re-order if damaged or missing.

Spare Parts List:

Assembly Kit

5417MM (1 SET)

1. Turn off the power at the fuse or circuit box before starting installation.

2. Loosen the wire nuts connected with the wires from photocell. (See Fig.1)

Note: Do not move the photocell to prevent water from seeping into the outlet box.

3. Take a white pigtail and black pigtail and make wire connections using wire nuts: (See Fig.2)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the back plate of the fixture.

Photocell

White Wires From Photocell

Wire Nuts

Wires From Fixture

Wires From

Main Power

Wire Nut

White Pigtail

Pigtail

Red Wires From Photocell

Black Wires From Photocell

Operation the Unit Without Photocell

Fig.1Fig.2

Mounting Screw (B) Wire Nut (F) Ball Nut (G)

Green Grounding

Screw (C)

A: 12"

B: 4-7/8"

C: 4"

Dieses Handbuch passt für folgende Modelle

Andere Vaxcel Außenleuchte Handbücher

Vaxcel

Vaxcel T0647 Gebrauchsanweisung

Vaxcel

Vaxcel T0238 Gebrauchsanweisung

Vaxcel

Vaxcel T0692 Gebrauchsanweisung

Vaxcel

Vaxcel T0364 Gebrauchsanweisung

Vaxcel

Vaxcel T0626 Gebrauchsanweisung

Vaxcel

Vaxcel T0365 Gebrauchsanweisung

Vaxcel

Vaxcel T0435 Gebrauchsanweisung

Vaxcel

Vaxcel T0246 Gebrauchsanweisung

Vaxcel

Vaxcel T0542 Gebrauchsanweisung

Vaxcel

Vaxcel T0620 Gebrauchsanweisung

Vaxcel

Vaxcel T0244 Gebrauchsanweisung

Vaxcel

Vaxcel T0454 Gebrauchsanweisung

Vaxcel

Vaxcel T0517 Gebrauchsanweisung

Vaxcel

Vaxcel T0571 Gebrauchsanweisung

Vaxcel

Vaxcel T0366 Gebrauchsanweisung

Vaxcel

Vaxcel T0572 Gebrauchsanweisung

Vaxcel

Vaxcel T0692 Gebrauchsanweisung

Vaxcel

Vaxcel T0649 Gebrauchsanweisung

Vaxcel

Vaxcel T0258 Gebrauchsanweisung

Vaxcel

Vaxcel T0193 Gebrauchsanweisung

Vaxcel

Vaxcel T0694 Gebrauchsanweisung

Vaxcel

Vaxcel T0396 Gebrauchsanweisung

Vaxcel

Vaxcel T0085 Gebrauchsanweisung

Vaxcel

Vaxcel T0575 Gebrauchsanweisung

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung