Vello BG-N10 Bedienungsanleitung
BG-N0
BAT TERY GRIP
Designed for the Nikon
D600 and D60 SLR Camera
USER’S MANUAL
Introduction
Thank you for choosing Vello and congratulations
on your new BG-N0 battery grip purchase. Enjoy
the many benefits that a battery grip offers, such as
extended shooting time and more control and comfort
when shooting in a vertical (portrait) orientation.
The Vello BG-N0 is compatible with the Nikon D600 and
D60 DSLR cameras. The BG-N0 accepts one Nikon
EN-EL5 rechargeable battery, in addition to the
camera’s internal battery. Six AA batteries (alkaline,
Ni-MH, lithium, or nickel-manganese) can be used
instead for added convenience. The BG-N0 is equipped
with an alternate shutter-release button, AE-L/AF-L
button, multi selector, and main and sub-command dials
for shooting in a vertical position.
Please read through this entire manual before
using the BG-N10 battery grip.
2
Precautions
1. The BG-N0 should only be used with compatible
devices specified in this manual.
2. Use only with batteries and battery holders
recommended in this manual. The BG-N0 can not
be used with other batteries or battery holders.
3. When the BG-N0 is not attached to the camera,
cover the power terminal with the contact cap. This
prevents electrical shorts caused by metal coming
into contact with the power terminals.
4. When the battery holder is removed from the
grip, remove the batteries or place the holder in
a container to prevent electrical shorts caused by
contact with other metal objects.
5. The memory card access lamp may light up
temporarily when the BG-N0 is mounted or
removed from the camera. This is part of the
normal operation.
6. If you notice smoke, noise, or an unusual smell from
the battery pack, discontinue use immediately.
Remove the batteries and take the device to a Vello
authorized reseller.
7. The BG-N0 does not have a power switch.
Instead, use the camera power switch to turn the
power on or off.
8. The battery level may not display properly if
batteries are inserted before mounting the grip.
9. Remove batteries from the grip when not in use.
10. Do not attempt to disassemble.
11. Avoid water or extreme humidity and keep in a dry
and cool place.
12 . Keep out of reach of children.
3
OVERVIEW INTRODUCTIONASSEMBLYOPER ATION
Overview
1
2
4
3
6
9
8
7
10
12
13
14
15
11
5
16
17
19 18
4
OVERVIEW INTRODUCTIONASSEMBLYOPER ATION
1Sub-Command Dial *
2Shutter-Release Button *
3Control Lock Switch
To prevent accidental triggering, the
control lock switch locks the shutter-
release button, AE-L/AF-L button,
multi selector dial, as well as the main
and sub-command dials on the BG-
N0. Unlock prior to use by switching
to the position. The control lock is
not a power switch.
4Tripod Socket
5Mounting Screw
6Contact Cap
7Camera Contact Cover Holder
8Power/Signal Contacts
9AE-L/AF-L Button *
10 Main Command Dial *
11 Multi Selector *
12 Locking Wheel
13 Battery Chamber Cover
14 Battery Chamber Latch
15 Battery Chamber
16 EN-EL5 Battery Holder
Holder for Nikon EN-EL5 batter y.
17 Power Terminals
(EN-EL5 Battery Holder)
18 AA Battery Holder
Holds six AA batteries.
19 Power Terminals
(AA Battery Holder)
* These controls perform the same
functions as their on-camera equivalents
and are affected by changes to the
Custom Settings menu. See camera
manual for details.
5
Attaching The Grip
1. Ensure that the power is
turned off on the camera
and that the Control Lock
on the BG-N0 is in the L
position before attaching
the grip.
2. Remove the contact cap
from the BG-N0 battery
grip. When the BG-
N0 is not attached to
the camera, replace the
contact cap to protect the
contacts.
3. The contacts for the BG-
N0 are on the bottom
of the camera where they
are protected by a contact
cover. Remove the contact
cover before mounting the
grip.
6
4. To prevent loss, place the
camera contact cover in
the contact cover holder
on the BG-N0.
5. Connect the BG-N0
grip to the camera
while aligning the grip’s
mounting screw with the
camera’s tripod socket.
6. Rotate the attachment
wheel in the direction
shown by the LOCK arrow
until it is firmly tightened.
It is not necessary to remove the
battery from the camera before
mounting the grip.
7
OVERVIEW INTRODUCTIONASSEMBLYOPER ATION
Inserting Batteries
1. Ensure that the power is turned off on the
camera and the Control Lock on the BG-N0
is in the Lposition. Turn the battery-chamber
latch counterclockwise to open the battery
chamber door.
2. Remove the battery holder from the BG-N0
grip. The EN-EL5 battery holder comes pre-
installed.
8
3. Nikon EN-EL5 Battery:
Matching the indentations
on the battery with the
EN-EL5 holder, press the
battery down and slide it in
the direction of the arrow
until the power terminals
click into place.
4. AA Batteries: Place Six
AA batteries of the same
type in the AA battery
holder as shown, while
ensuring that they are in
the correct orientation.
5. Insert the battery holder
into the grip. Close the
battery chamber and then
turn the latch clockwise
to lock. Turn the camera
on and check the battery
level in the control panel
or viewfinder.
OVERVIEW INTRODUCTIONASSEMBLYOPER ATION
9
The camera displays the following battery levels.
Nikon EN-EL5 Battery:
Control Panel Viewfinder Description
Battery fully
charged.
Battery partially
discharged.
Low battery.
Prepare spare
batteries.
(blinking) (blinking)
Battery
exhausted.
Shutter release is
disabled.
AA Batteries:
Control Panel Viewfinder Description
Batteries fully
charged.
Low battery
power. Prepare
spare batteries.
(blinking) (blinking)
Batteries
exhausted.
Shutter release is
disabled.
Battery Info
0
Inhaltsverzeichnis
Andere Vello Kamerazubehör Handbücher
Vello
Vello BG-N11 Bedienungsanleitung
Vello
Vello UMBRA Bedienungsanleitung
Vello
Vello BG-C15-2 Bedienungsanleitung
Vello
Vello BG-N8 Bedienungsanleitung
Vello
Vello BG-N19-2 Bedienungsanleitung
Vello
Vello FreeWave Viewer Bedienungsanleitung
Vello
Vello BG-C4 Bedienungsanleitung
Vello
Vello FreeWave Captain Bedienungsanleitung
Vello
Vello BG-N6 Bedienungsanleitung
Vello
Vello EPN - DK19 Bedienungsanleitung
Vello
Vello CB-900 Bedienungsanleitung
Vello
Vello FreeWave Flash Trigger LR Bedienungsanleitung
Vello
Vello BG-C9 Bedienungsanleitung
Vello
Vello RCB-TC Bedienungsanleitung
Vello
Vello Screen Protector Ultra Bedienungsanleitung
Vello
Vello LW-500-U Bedienungsanleitung
Vello
Vello BG-N2 Bedienungsanleitung
Vello
Vello LA-C-NAF Bedienungsanleitung
Vello
Vello BG-C18 Bedienungsanleitung
Vello
Vello Macrofier Bedienungsanleitung
