Viavi IFR 6000 Bedienungsanleitung

IFR 6000 XPDR/DME

TCAS/ADS-B/TIS/UAT

TEST SET

Getting Started Guide

VIAVI Solutions

1-844-GO-VIAVI

www.viavisolutions.com

IFR 6000 XPDR/DME

TCAS/ADS-B/TIS/UAT TEST SET

Getting Started Guide 6096 Rev. 003

Part of 6093 (CD)

This Guide contains essential information relating to initial use of the unit.

VIAVI recommends the operator become familiar with this Guide and the

Operation Manual contained on the accompanying CD.

VIAVI updates Test Set software on a routine basis.

As a result, examples may show images from earlier software

versions. Images are updated when appropriate.

6096 Rev. 003 GETTING STARTED GUIDE - TEST SET IFR 6000 i

Notice

Every effort was made to ensure that the information in this manual was accurate at the time of release.

However, information is subject to change without notice, and VIAVI reserves the right to provide an

addendum to this manual with information not available at the time that this manual was created.

transmitted, electronically or otherwise, without written permission of the publisher. VIAVI Solutions and

the VIAVI logo are trademarks of VIAVI Solutions Inc. (“VIAVI”).

All other trademarks and registered trademarks are the property of their respective owners.

Patent Information

Patented as described at www.viavisolutions.com/patents

Reproduction and distribution of this guide is authorized for US Government purposes only.

DFARS Statement

If software is for use in the performance of a U.S. Government prime contract or subcontract, software is

delivered and licensed as “Commercial Computer Software” as defined in DFAR 252.227-7014 (Feb

2014), or as a “Commercial Item” as defined in FAR 2.101(a) or as “Restricted Computer Software” as

defined in FAR 52.227-19 (Dec 2007) or any equivalent agency regulation or contract clause. Use,

duplication or disclosure of Software is subject to VIAVI Solutions' standard commercial license terms,

and non-DOD Departments and Agencies of the U.S. Government will receive no greater than Restricted

Rights as defined in FAR 52.227-19(c)(1-2) (Dec 2007). U.S. Government users will receive no greater

than Limited Rights as defined in FAR 52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2) (November

1995), as applicable in any technical data.

Terms and conditions

Specifications, terms, and conditions are subject to change without notice. The provision of hardware,

services, and/or software are subject to VIAVI’s standard terms and conditions, available at

www.viavisolutions.com/en/terms-and-conditions.

Open Source Disclaimer - IMPORTANT READ CAREFULLY

The IFR 6000 XPDR/DME TCAS/ADS-B/TIS/UAT TEST SET includes third party software licensed under

the terms of separate open source software licenses. By using this software you agree to comply with the

terms and conditions of the applicable open source software licenses. Software originated by VIAVI is not

subject to third party licenses. Terms of the VIAVI Software License different from applicable third party

licenses are offered by VIAVI alone.

ii GETTING STARTED GUIDE - TEST SET IFR 6000 6096 Rev. 003

Declaration of Conformity

VIAVI recommends keeping a copy of the Declaration of Conformity that shipped with the unit with the

test set at all times.

Warranty Information

Warranty information for this product is available on the VIAVI website at

https://www.viavisolutions.com/en-us/warranty-information.

Federal Communications Commission (FCC) Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This equipment was tested and found to comply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference, in which case you will be required to correct

the interference at your own expense.

The authority to operate this equipment is conditioned by the requirements that no modifications be made

to the equipment unless the changes or modifications are expressly approved by VIAVI.

ALERT

•To comply with FCC RF Exposure compliance requirements, a separation distance of at

least 20 cm must be maintained between the antenna of this device and all persons.

•This transmitter must not be co-located in conjunction with any other antenna or

transmitter.

6096 Rev. 003 GETTING STARTED GUIDE - TEST SET IFR 6000 iii

Industry Canada Requirements

This device complies with Industry Canada's license-exempt RSSs. Operation is subject to the following

two conditions: 1) This device may not cause interference; and, 2) This device must accept any

interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts

de licence. L'exploitation est autorisée aux deux conditions suivantes: 1) l'appareil ne doit pas produire

de brouillage; et, 2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

EU WEEE and Battery Directives

This product, and the batteries used to power the product, should not be disposed of as unsorted

municipal waste and should be collected separately and disposed of according to your national

regulations.

VIAVI has established a take-back processes in compliance with the EU Waste Electrical and Electronic

Equipment (WEEE) Directive, 2012/19/EU, and the EU Battery Directive, 2006/66/EC.

Instructions for returning waste equipment and batteries to VIAVI can be found in the WEEE section of

VIAVI’s Standards and Policies web page.

If you have questions concerning disposal of your equipment or batteries, contact the VIAVI WEEE

Program Management team at WEEE.E[email protected].

EU REACH

Article 33 of EU REACH regulation (EC) No 1907/2006 requires article suppliers to provide information if

a listed Substances of Very High Concern (SVHC) is present in an article above a certain threshold.

For information on the presence of REACH SVHCs in VIAVI products, see the Hazardous Substance

Control section of VIAVI’s Standards and Policies web page.

EU CE Marking Directives (LV, EMC, RoHS, RE)

This product conforms with all applicable CE marking directives. Please see EU Declaration of

Conformity for details.

EMC Directive Compliance

This product was tested and conforms to the EMC Directive, 2014/30/EU for electromagnetic

compatibility.

iv GETTING STARTED GUIDE - TEST SET IFR 6000 6096 Rev. 003

California Proposition 65

California Proposition 65, officially known as the Safe Drinking Water and Toxic Enforcement Act of

1986, was enacted in November 1986 with the aim of protecting individuals in the state of California and

the state's drinking water and environment from excessive exposure to chemicals known to the state to

cause cancer, birth defects or other reproductive harm.

For the VIAVI position statement on the use of Proposition 65 chemicals in VIAVI products, see the

Hazardous Substance Control section of VIAVI’s Standards and Policies web page.

Korea Certification

Ordering information

This manual is a product of the VIAVI Technical Publications Department, issued for use with the IFR 6000

XPDR/DME TCAS/ADS-B/TIS/UAT TEST SET. The PDF format of this manual is available on the VIAVI

product website.

Go to: https://www.viavisolutions.com/en-us/resources/literature-library

•Type IFR6000 to find the manuals associated with the IFR 6000 XPDR/DME TCAS/ADS-B/TIS/UAT

TEST SET.

Contact Information

Contact the Technical Assistance Center (TAC) for technical support or with any questions regarding this

or other VIAVI products.

•Phone: 1-844-GO-VIAVI

•Email: Tech[email protected]

For the latest TAC information, go to:

https://www.viavisolutions.com/en-us/support/technical-product-support/technical-assistance

Class A Equipment (Industrial Broadcasting &

Communications Equipment).

This equipment is Industrial (Class A) electromagnetic wave suitability

equipment and seller or user should take notice of it, and this

equipment is to be used in the places except for home.

SAFETY FIRST: TO ALL OPERATIONS PERSONNEL

REFER ALL SERVICING OF UNIT TO QUALIFIED TECHNICAL PERSONNEL. THIS UNIT CONTAINS NO

OPERATOR SERVICEABLE PARTS.

WARNING: USING THIS EQUIPMENT IN A MANNER NOT SPECIFIED BY THE ACCOMPANYING

DOCUMENTATION MAY IMPAIR THE SAFETY PROTECTION PROVIDED BY THE EQUIPMENT.

CASE, COVER OR PANEL REMOVAL

Opening the Case Assembly exposes the operator to electrical hazards that can result in electrical shock or

equipment damage. Do not operate this Test Set with the Case Assembly open.

SAFETY IDENTIFICATION IN TECHNICAL MANUAL

This manual uses the following terms to draw attention to possible safety hazards that may exist when

operating or servicing this equipment.

CAUTION: THIS TERM IDENTIFIES CONDITIONS OR ACTIVITIES THAT, IF IGNORED, CAN RESULT IN

EQUIPMENT OR PROPERTY DAMAGE (E.G., FIRE).

WARNING: THIS TERM IDENTIFIES CONDITIONS OR ACTIVITIES THAT, IF IGNORED, CAN RESULT IN

PERSONAL INJURY OR DEATH.

SAFETY SYMBOLS IN MANUALS AND ON UNITS

CAUTION: Refer to accompanying documents. (This symbol refers to

specific CAUTIONS represented on the unit and clarified in the text.)

AC OR DC TERMINAL: Terminal that may supply or be supplied with AC or

DC voltage.

DC TERMINAL: Terminal that may supply or be supplied with DC voltage.

AC TERMINAL: Terminal that may supply or be supplied with AC or

alternating voltage.

EQUIPMENT GROUNDING PRECAUTION

Improper grounding of equipment can result in electrical shock.

USE OF PROBES

Check the specifications for the maximum voltage, current and power ratings of any connector on the Test Set

before connecting it with a probe from a terminal device. Be sure the terminal device performs within these

specifications before using it for measurement, to prevent electrical shock or damage to the equipment.

POWER CORDS

Power cords must not be frayed, broken nor expose bare wiring when operating this equipment.

USE RECOMMENDED FUSES ONLY

Use only fuses specifically recommended for the equipment at the specified current and voltage ratings.

INTERNAL BATTERY

This unit contains a Lithium-Ion Battery, serviceable only by a qualified technician.

CAUTION: Signal Generators can be a source of Electromagnetic Interference (EMI) to communication

receivers. Some transmitted signals can cause disruption and interference to communication

services out to several miles. Users of this equipment should scrutinize any operation that results

in radiation of a signal (directly or indirectly) and should take necessary precautions to avoid

potential communication interference problems.

6096 REV 003 GETTING STARTED GUIDE - TEST SET IFR 6000 Page 1

TABLE OF CONTENTS

Service Upon Receipt of Material 2

Specifications 5

Installation 6

Controls, Connectors and Indicators 9

Auxiliary Equipment 14

Screen Hierarchy 16

Self Test 21

Battery/Voltage Instructions 24

Fuse Replacement 27

Battery Replacement 28

6096 REV 003 GETTING STARTED GUIDE - TEST SET IFR 6000 Page 2

SERVICE UPON RECEIPT OF MATERIAL

UNPACKING

Special-design packing material inside this shipping carton provides maximum protection for the IFR

6000. Avoid damaging the carton and packing material during equipment unpacking. Use the following

steps for unpacking the IFR 6000.

⚫Cut and remove the sealing tape on the carton top and open the carton.

⚫Grasp the IFR 6000 transit case firmly, while restraining the shipping carton, and lift the equipment

and packing material vertically.

⚫Place the IFR 6000 transit case and end cap packing on a suitable flat, clean and dry surface.

⚫Remove the protective plastic bag from the IFR 6000 transit case.

⚫Place protective plastic bag and end cap packing material inside shipping carton.

⚫Store the shipping carton for future use should the IFR 6000 need to be returned.

Andere Handbücher für IFR 6000

Inhaltsverzeichnis

Andere Viavi Prüfgeräte Handbücher

Viavi

Viavi SmartOTDR Stücklistenhandbuch

Viavi

Viavi E4100 Series Stücklistenhandbuch

Viavi

Viavi T-BERD/MTS 5800 Installationsanleitung

Viavi

Viavi ComXpert CX100 Bedienungsanleitung

Viavi

Viavi 4100 Series Stücklistenhandbuch

Viavi

Viavi T-BERD/MTS-5800 OCC-4056C Stücklistenhandbuch

Viavi

Viavi T-BERD/MTS 5800 Bedienungsanleitung

Viavi

Viavi AVX-10K Bedienungsanleitung

Viavi

Viavi OneAdvisor ONA-800 Technisches Handbuch

Viavi

Viavi 3900 Series Bedienungsanleitung

Viavi

Viavi T-BERD/MTS-5800 Stücklistenhandbuch

Viavi

Viavi MTS 2000 Bedienungsanleitung

Viavi

Viavi 3900 Series Betriebsanleitung

Viavi

Viavi T-BERD 5800 Stücklistenhandbuch

Viavi

Viavi SmartPocket OLP-39G Bedienungsanleitung

Viavi

Viavi P5000i Bedienungsanleitung

Viavi

Viavi SmartClass Fiber OLTS-85 Bedienungsanleitung

Viavi

Viavi T-BERD/MTS 5800 Installationsanleitung

Viavi

Viavi Parent Guide Bedienungsanleitung

Viavi

Viavi T-BERD MTS 5800 Stücklistenhandbuch

Viavi

Viavi HST-3000 Bedienungsanleitung

Viavi

Viavi MTS 2000 Stücklistenhandbuch

Viavi

Viavi HST-3000 Bedienungsanleitung

Viavi

Viavi ATC-5000NG Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung