Viavi T-BERD/MTS 2000 Bedienungsanleitung

VIAVI//Public

T-BERD/MTS 2000 Handheld Modular Test Set

T-BERD/MTS-2000 Handheld Modular Test Set

QUICK CARD

►Use the VIAVI P5000i or FiberChek Probe

microscope to inspect both sides of every

connection being used (Nano OSA Port,

Launch Cable, bulkhead connectors, patch

cables, etc.)

►Focus fiber on the screen. If dirty, clean the

end-face.

►If it appears clean, run inspection test.

►If it fails, clean the fiber and re-run inspection

test. Repeat until it passes.

Tuning and Testing DWDM Optics with the Nano OSA

This quick card describes how to tune and test DWDM Optical transceivers using a

T-BERD/MTS-2000 equipped with a Nano OSA module.

EQUIPMENT REQUIREMENTS

FIBER INSPECTION GUIDELINES

►T-BERD/MTS 2000 equipped with the

following:

•Fiber Optics Software Release V21.14 or

greater

•Nano OSA Module

(OCV-4100 or OSA-4100 )

•41SFP Software Option

•Fiber optic cleaning and inspection tools

►Fiber optic patch cable or Launch Cable

►Optical Coupler to connect patch cable to

Fiber Under Test

Figure 2: Inspect Before You Connect

Figure 1: Equipment Requirements

VIAVI//Public

T-BERD/MTS 2000 Handheld Modular Test Set

T-BERD/MTS-2000 Handheld Modular Test Set

QUICK CARD

CONNECT SFP+ TO NANO OSA PORT

LAUNCH TEST

1. Press the ON/OFF button to start the

test set.

2. Press the Home button to display

the Home view with the Optical Spectrum

icon.

3. Tap the Optical Spectrum icon

until it is yellow and highlighted.

Figure 3: Home Screen

All fibers and connectors should be cleaned

and inspected prior to connection, as

described on page 1.

1. Insert SFP+ into SFP bay on top of

module.

2. Connect fiber patch cable to the SFP+ Tx

port and Nano OSA Port.

Figure 4: Inspect Nano OSA port

SFP+ Tx Nano OSA

Figure 5: Connect SFP+ Tx to Nano OSA port

VIAVI//Public

T-BERD/MTS 2000 Handheld Modular Test Set

T-BERD/MTS-2000 Handheld Modular Test Set

QUICK CARD

Product specifications and descriptions in this

document are subject to change without notice.

Patented as described at viavisolutions.com/patents

To reach the VIAVI office nearest you,

visit viavisolutions.com/contact

+1 844 GO VIAVI

(+1 844 468-4284)

TUNE AND TEST SFP+

1. Tap SETUP icon

2. Tap SFP Settings (SFP must be

inserted for this selection to appear).

3. If tunable DWDM SFP, tap ITU_T Ch and

set the DWDM Channel.

Note: SFP Must use standard MSA

compliant tuning method.

4. Tap State and select State = ON.

5. Verify red light next to SFP+ is now on.

6. To verify wavelength and power level,

connect the fiber patch cable from the

SFP+ Tx port to the Nano OSA Port.

7. Tap START icon to run sweep

8. View Results (ITU-Ch, power, offset)

to verify optic.

SFP light (red=ON)

Figure 6: Setup

Figure 7: SFP Light

Figure 8: Sweep

Andere Handbücher für T-BERD/MTS 2000

Andere Viavi Prüfgeräte Handbücher

Viavi

Viavi FBP-HD4i Bedienungsanleitung

Viavi

Viavi IFR 6000 Stücklistenhandbuch

Viavi

Viavi SmartClass Fiber MPOLx Stücklistenhandbuch

Viavi

Viavi T-BERD/MTS-2000 Stücklistenhandbuch

Viavi

Viavi E4100 Series Stücklistenhandbuch

Viavi

Viavi RGS-2000NG Bedienungsanleitung

Viavi

Viavi ALT-9000 Bedienungsanleitung

Viavi

Viavi OneAdvisor ONA-1000 400G Technisches Handbuch

Viavi

Viavi OneAdvisor 1000 Bedienungsanleitung

Viavi

Viavi T-BERD MTS-580 Stücklistenhandbuch

Viavi

Viavi ALT-9000 Stücklistenhandbuch

Viavi

Viavi HST-3000 Stücklistenhandbuch

Viavi

Viavi T-BERD/MTS-5800 Stücklistenhandbuch

Viavi

Viavi SmartOTDR Stücklistenhandbuch

Viavi

Viavi T-BERD MTS 5800 Stücklistenhandbuch

Viavi

Viavi OneAdvisor 1000 Bedienungsanleitung

Viavi

Viavi T-BERD/MTS 4000 V2 Stücklistenhandbuch

Viavi

Viavi MSQ-900 Bedienungsanleitung

Viavi

Viavi 3550 Betriebsanleitung

Viavi

Viavi T-BERD 5800 Bedienungsanleitung

Viavi

Viavi SmartClass FBP-OLP-82 Bedienungsanleitung

Viavi

Viavi FCOMP/-PRO T-BERD/MTS-2000V2 Bedienungsanleitung

Viavi

Viavi T-BERD/MTS-580 Installationsanleitung

Viavi

Viavi IFR 4000 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung