Viavi OneAdvisor-800 Bedienungsanleitung

VIAVI Solutions

Quick Card

OneAdvisor-800 Modular Test Set

Measuring Optical Power Levels with a 4100-series OTDR Module

This procedure describes how to use an E4100-series OTDR module as an Optical Power Meter (OPM).

If optioned, the OTDR module can operate as an OPM or Optical Light Source, but not at the same

time. Light Source is a standard feature on most new OTDR modules, while Power Meter is an option.

Equipment Requirements:

•OneAdvisor-800 equipped with the

following:

oFiber Optics Software Release V19.92

or greater

oE4100 Series OTDR Module

oE41OTDRPM Power Meter option

•Fiber optic cleaning and inspection tools

•Reference Cable (patch cord) with

connectors matching the OTDR port and

Fiber Under Test

•Optical Coupler to connect Reference

Cable to Fiber Under Test

Figure 1: Equipment Requirements

The following information is required to complete the test:

•Type of Fiber (Multimode or Single Mode)

•Type of Connectors (SC UPC, SC APC, LC UPC, etc.)

•Wavelength(s) to be tested (850nm, 1300nm, 1310nm, 1550nm, etc.)

Fiber Inspection Guidelines:

•Use the VIAVI P5000i or FiberChek Probe

microscope to inspect both sides of

every connection being used (OTDR Port,

Reference Cable, bulkhead connectors,

patch cords, etc.)

•Focus the fiber on the screen. If dirty,

clean the end-face.

•If it appears clean, run inspection test.

•If it fails, clean the fiber and re-run

inspection test. Repeat until it passes.

Figure 2: Inspect Before You Connect (IBYC)

VIAVI Solutions

Connect Reference Cable to OTDR port:

1. Inspect the OTDR port on top of the test

set.

2. Inspect the fiber end face of Reference

Cable.

3. Connect Reference Cable to the OTDR

port.

Figure 3: OTDR Port Inspection

Connect to Fiber Under Test (FUT):

The Reference Cable may be connected to the

FUT via an optical patch panel (OPP) or an

optical coupler:

1. If the interface to the FUT is a patch

cord, connect the patch cord to an

optical coupler with the same connector

type.

2. Inspect the FUT connected to the

coupler or OPP.

3. Inspect the other fiber end face of the

Reference Cable.

4. Connect the Reference Cable to the

coupler or OPP.

Figure 4: Connecting Reference Cable to OPP

Figure 5: Connecting Reference Cable to FUT with a coupler

Launch the Power Meter:

1. Press the Power button to turn on

the OneAdvisor-800.

2. Press the Home button to

display the Home view. Select the

icon and the

3. Press the POWERMETER button to

activate the power meter.

•for Single Mode fiber

•for Multimode fiber

Figure 6: Test Screen

Figure 7: Power Meter Screen

VIAVI Solutions

(+1 844 468 4284)

To reach the VIAVI office nearest you,

visit viavisolutions.com/contacts.

Product specifications and descriptions in this

document are subject to change without notice.

Measure Optical Power:

1. Tap the Wavelength drop down in the

Powermeter on Module section and

select the wavelength you wish to

measure.

2. Tap the Unit drop down and select

dBm.

3. View the power level in the

Powermeter on Module section.

Figure 8: Source and Powermeter Screen

Inhaltsverzeichnis

Andere Viavi Prüfgeräte Handbücher

Viavi

Viavi T-BERD/MTS 4000 Bedienungsanleitung

Viavi

Viavi OneAdvisor-1000 Bedienungsanleitung

Viavi

Viavi Seeker X with MCA III Bedienungsanleitung

Viavi

Viavi T-BERD/MTS 4000 V2 Stücklistenhandbuch

Viavi

Viavi T-BERD/MTS 5800 Bedienungsanleitung

Viavi

Viavi ALT-9000 Stücklistenhandbuch

Viavi

Viavi 3900 Series Betriebsanleitung

Viavi

Viavi T-BERD/MTS-5800 Stücklistenhandbuch

Viavi

Viavi T-BERD/MTS 8000 Bedienungsanleitung

Viavi

Viavi OneAdvisor 1000 Bedienungsanleitung

Viavi

Viavi FBP-HD4i Bedienungsanleitung

Viavi

Viavi OneAdvisor 800 400G Module Bedienungsanleitung

Viavi

Viavi MSQ-900 Bedienungsanleitung

Viavi

Viavi OneExpert ONX CATV Bedienungsanleitung

Viavi

Viavi SmartClass Fiber OLTS-85 Bedienungsanleitung

Viavi

Viavi OneAdvisor ONA-800 Bedienungsanleitung

Viavi

Viavi MTS 2000 Stücklistenhandbuch

Viavi

Viavi T-BERD 5800 Stücklistenhandbuch

Viavi

Viavi ComXpert CX100 Bedienungsanleitung

Viavi

Viavi OneAdvisor 800 Platform Bedienungsanleitung

Viavi

Viavi OneExpert DSL ONX-580 Bedienungsanleitung

Viavi

Viavi T-BERD/MTS-5800 Stücklistenhandbuch

Viavi

Viavi E4100 Series Stücklistenhandbuch

Viavi

Viavi HST-3000 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung