Vicon V660B-312IR Betriebsanleitung

www.vicon-security.com

Installation and Operation Guide

XX230-00-01

V660B-312IR

High-Resolution Bullet Camera

Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the

operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed

to be used in life-critical situations and must not be used for this purpose.

Vicon Industries Inc., 89 Arkay Drive, Hauppauge, New York 11788

Tel: 631-952-2288 Fax: 631-951-2288 Toll Free: 800-645-9116

24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300

Document Number: 8009-8230-00-01

Product specications subject to change without notice.

Issued: 0811

WARNINGS AND CAUTIONS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT

THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER(OR BACK).

NO USER-SERVICABLE PARTS INSIDE.

REFFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated ''dangerous

voltage'' within the product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the product.

PRECAUTIONS

Safety

Should any liquid or solid object fall into the cabinet,

unplug the unit and have it checked by

qualified personnel before operating it any further.

Unplug the unit from the wall outlet if it is not going to

be used for several days or more.

To disconnect the cord, pull it out by the plug. Neve

pull the cord itself.

llow adequate air circulation to prevent internal heat

build-up. Do not place the unit on soft surfaces (rugs,

carpets, sofas, etc.) or near materials (curtains,

draperies) that may block the ventilation holes.

Height and vertical linearity controls located on the

rear panel are for special adjustments by qualified

personnel only.

Cleaning

Clean the unit with a slightly damp soft cloth.

Use a mild household detergent. Never use strong

solvents such as thinner or benzine as they might

damage the finish of the unit.

Retain the original carton and packing materials for safe

transport of this unit in the future.

FCC COMPLIANCE STATEMENT

CE COMPLIANCE STATEMENT

INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED

AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE,

PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED

TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL

INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL

ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE

RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN

ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO

CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE

REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED

BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S

AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME

NMB-003 DU CANADA.

WARNING:This is a Class A product. In a domestic environment this product

may cause radio interference in which case the user may be required to take

adequate measures.

IMPORTANT SAFEGUARDS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been moisture, does not operate

normally, or has been dropped.

15. CAUTION THESE SERVICING INSTRUCTIONS ARE FOR USE BY

QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF

ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER

THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS

UNLESS YOU QRE QUALIFIED TO DO SO.

16. Use Certified/Listed Class 2 power source only.

TABLE OF CONTENTS

INTRODUCTION ---------------------------------------------------------------------------------------6

PACKAGE CONTENTS ------------------------------------------------------------------------------7

DIMENSIONS -------------------------------------------------------------------------------------------7

WATER INGRESS PREVENTION-----------------------------------------------------------------7

BASE INSTALLATION --------------------------------------------------------------------------------8

CAMERA CONNECTIONS --------------------------------------------------------------------------8

STRUCTURE OF THE SETUP MENU -----------------------------------------------------------10

THE DEFINITION OF TERMS ----------------------------------------------------------------------11

SPECIFICATIONS -------------------------------------------------------------------------------------18

INTRODUCTION

The camera provides high-quality images using Sony 1/3” CCD and digital

Signal process LSI.

Features:

●High resolution and high performance Sony® Super HAD™ II CCD

Technology.

●Excellent picture quality.

●560 TV lines (Color) of resolution.

●Motorized f=2.8-12mm Varifocal F 1.4

●Zoom and Focus Control via Remote or Keyboard Controller

●3D Dynamic Noise Reduction Function.

●Digital Wide Dynamic Range Function.

●BLC (Back Light Compensation) Function.

●AGC (Auto Gain Control) Function.

●Motion Detection Function

●IR Range distance up to 40M

●Color & B&W auto switch by photo TR

●Operates in +12V DC, +24V AC

●Cable thru bracket

●Weatherproof housing IP-66

●Camera Mount : Camera mount directly to the wall or ceiling.

●RS-485 Remote camera control(Fastrax/Pelco D and P)

IMPORTANT: The user of this camera is responsible for

checking and complying with local, state, and federal laws and

statutes concerning the recording and monitoring of audio

signals.

PACKAGE CONTENTS

CAMERA SUNSHIELD L-WRENCH DRIVER

SUNSHIELD-BOLT SCREWS REMOTE CONTROLLER

L-Wrench Unscrew and tighten bracket screws

Driver Control Zoom & Focus ring and unscrew remote control port

Screw Firmly attach the bracket to the wall or ceiling

DIMENSIONS

WATER INGRESS PREVENTION

After using the REMOTE CONTROL and lock

completely the REMOTE CONTROL PORT CAP.

Caution : This is a sealed camera with no internal

adjustments and as such opening the case may

invalidate the warranty.

BASE INSTALLATION

Camera Fix screws(3X) and align the bullet camera with it like Above picture.

CAMERA CONNECTION

M5 X 25mm Tapping Screw (3EA)

♦How to Adjust ZOOM/FOCUS

Remote Controller

Insert the din jack of remote controller to the hall of housing

Adjust the zoom using up/down key

Adjust the focus using left/right key

Keyboard Controller

Connect the 485(+)(-) of Keyboard controller with 485 (+)(-) Terminal Block

Adjust the zoom using the tele/wide key

Adjust the focus using the near/far key

V660B-312IR CAMERA CONNECTION

Number Name Description

1 Video

BNC connector for connection to monitor, DVR,

switcher, etc.

2 RS-485

2-pin terminal block used to connect to keypads,

controllers, etc.

Green wire is RS-485 (+). Blue wire is RS-485 (-).

3 Power

3-pin terminal block used for 24 VAC/12 VDC

power connection.

Autosenses polarity.

4 Motion

2-pin terminal block used for motion output.

Yellow wire is motion out.

Black wire is ground.

STRUCTURE OF THE SETUP MENU

<SETUP>

1. LENS

2. EXPOSURE

3. WHITE BAL

4. DAY NIGHT

5. 3DNR

6. SPECIAL

7. ADJUST

8. RESET

9. EXIT

<LENS>

SHUTTER

BRIGHTNESS

AGC

SENSE-UP

BLC

D-WDR

RETURN

AWB

AWC -> SET

MANUAL

INDOOR

OUTDOOR

ATW

AUTO

EXT

B/W

COLOR

<3DNR>

LEVEL

RETURN

CAM TITLE

D-EFFECT

RS485

MOTION

PRIVACY

SYNC

LANGUAGE

RETURN

SHARPNESS

BLUE

RED

RETURN

<RESET>

FACTORY

RETURN

Inhaltsverzeichnis

Andere Vicon Sicherheitskamera Handbücher

Vicon

Vicon V920B Series Bedienungsanleitung

Vicon

Vicon V661D-312IR Betriebsanleitung

Vicon

Vicon V9360-6 Series Betriebsanleitung

Vicon

Vicon V922B-W551-A1 Bedienungsanleitung

Vicon

Vicon Cruiser SN663V-A Bedienungsanleitung

Vicon

Vicon VC2650-DSP Bedienungsanleitung

Vicon

Vicon Surveyor 282-00-02 Series Bedienungsanleitung

Vicon

Vicon Roughnec V922D Series Bedienungsanleitung

Vicon

Vicon Surveyor MKII Betriebsanleitung

Vicon

Vicon Roughneck Pro V2000D Series Bedienungsanleitung

Vicon

Vicon Roughneck V2000D-PTZ Bedienungsanleitung

Vicon

Vicon VC-600W Bedienungsanleitung

Vicon

Vicon V2008-W0950-LPR Bedienungsanleitung

Vicon

Vicon SurveyorVF SVFT-M Bedienungsanleitung

Vicon

Vicon V992B-IR4 Bedienungsanleitung

Vicon

Vicon CE102B Bedienungsanleitung

Vicon

Vicon VN-755IP Bedienungsanleitung

Vicon

Vicon Roughneck Pro V2000B Series Bedienungsanleitung

Vicon

Vicon ROUGHNECK V910 Bedienungsanleitung

Vicon

Vicon V9360W Bedienungsanleitung

Vicon

Vicon VC-630 Bedienungsanleitung

Vicon

Vicon V700-C Series Bedienungsanleitung

Vicon

Vicon XX264-20-00 Bedienungsanleitung

Vicon

Vicon VC5050-DSP Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung