Videcon Viola 2VIO2-M4BL Bedienungsanleitung
USER MANUAL
VIO2-M4BL
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
2
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE.
PLEASE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
NOTE: This equipment has been tested and found to comply with the
limits for a Class “A” digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the users will be
required to correct the interference at their own expense.
FCC Caution: To assure continued compliance, use only shielded
interface cables when connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this equipment.
This Class A digital apparatus meets all the requirements of the
Canadian Interference Causing Equipment Regulations.
WARNING
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
3
LIMITATION OF LIABILITY
!THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTIBILITY, FITNESS FOR ANY
PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD
PARTY’S RIGHT.
!THIS PUBLICATION COULD INCLUDE TECHNICAL INACCUACIES OR
TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE
INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF
THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT(S).
DISCLAIMER OF WARRANTY
IN NO EVENT SHALL THE SUPPLIER BE LIABLBE TO ANY PARTY OR ANY
PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE
OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO
THE FOLLOWINGS:
!ANY DAMAGE OR LOSS, INCLUDING BUT WITHOUT LIMITATION,
DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY,
ARISING OUT OF OR RELATING TO THE PRODUCT;
!PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE
USE OR NEGLIGENT OPERATION OF THE USER;
!UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE
PRODUCT BY THE USER;
!ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR
DAMAGE, ARISING OUT OF THE SYSTEM COMBINED WITH THE
DEVICES OF THE THIRD PARTY;
!ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON
OR ORGANIZATION BEING A PHOTOGENIC SUBJECT, DUE TO
VIOLATION OF PRIVACY WITH THE RESULT OF THAT
SURVEILLANCE-CAMERA’S PICTURE, INCLUDING SAVED DATA, FOR
SOME REASON, BECOMES PUBLIC OR IS USED FOR THE PURPOSE
OTHER THAN SURVEILLANCE.
4
PRECAUTIONS
!Please refer all work related to the installation of this product to
qualified service personnel or system installers.
!Do not operate the appliance beyond its specified temperature, humidity
or power source ratings.
Use the appliance at temperature within 0oC ~ +40oC(32oF ~ 122oF) and
humidity below 85%.
The input power source for this appliance is +12 VDC.
Performance and lifetime of hard disk drives are easily affected by heat (used
at high temperature). It is recommended to use this appliance at
temperature within +20oC ~ +30oC(68oF ~ 86oF)
!Handle the hard disk drives with care.
It is possible to damage them if they are moved while their motors are still
running. Do not move them just after turning the power on or off (for around
30 seconds).
Protect the hard disk drives from static electricity.
Do not stack them or keep them upright.
Do not use an electric screwdriver to fix them.
!Clean only with dry cloth.
!Do not block any ventilation openings.
!Do not use the appliance near any heat sources such as radiators, heat
registers, stoves or other apparatus that produce heat.
!Protect the power cord from being stepped on or pinched particularly at plugs,
convenient receptacles and the points where they exit from the apparatus.
!Do not drop metallic parts through slots. This could permanently damage
the appliance. Turn the power off immediately and contact qualified service
personnel for service.
!Handle the appliance with care. Do not strike or shake, as this may damage
the appliance.
!Do not expose the appliance to water or moisture, nor try to operate it in wet
areas. Do take immediate action if the appliance becomes wet. Turn the
power off and refer servicing to qualified service personnel. Moisture may
damage the appliance and also cause electric shock.
!Do not use strong or abrasive detergents when cleaning the appliance body.
When the dirt is hard to remove, use a mild detergent and wipe gently.
!Do not overload outlets and extension cords as this may result in a risk of fire
or electric shock.
!Please make a note of your settings and save them. This will help when you
are required to change the system configuration, or when unexpected failure
or trouble occurs.
!Distributing, copying, disassembling, reverse compiling, reverse engineering,
and also exporting in violation of export laws of the software provided with this
product, is expressly prohibited.
5
Table of Contents
1. Product Overview………………….……………………….……...
1.1 Features…………………..…….…………..…………………...
2. Panels And Remote Controller…………...………………….…….
2.1 Front Panel………….……….…………………………….…….
2.2 Back Panel………………….…………………………….……..
2.3 Remote Controller…………..…….……………………….……
3. Installations…….…….……………………………………….……
3.1 Basic Connections…………….………………………….……..
3.2 Optional Connections…………..………………………….……
4. Main Screen And Basic Operations………….……..……….…...
4.1 Text Input……………………………………….………………
4.2 Login And Logout………………………………………………
4.3 Basic Operations…………………………….…………………
4.4 Digital Zoom…….………………………….………….………
5. Menu Display………..……..………………………………….…...
5.1 Status Display….……………………………….………………
5.2 Volume Control…………..……………..……………..………
5.3 Video Adjustment…………..……………..……………..……
5.4 Display……………..…………………..………………………
5.5 Backup Device……………..……………..……………………
5.6 Software Upgrade (Administrator) ……………………………
5.7 System Shutdown (Administrator)……………….……………
6. Setup (Administrator)………………..….………………………...
6.1 Pre-Camera Setup…………………..….………………………...
6.2 Camera Setup……………………………………………………
6.2.1 Video Loss Setup…………………..………………………
6.2.2 Motion Setup……………………….………………………
6.3 Alarm Setup………………….…..…………………….……….
6.4 Main/SEQ Display Setup………………………………………
6.5 Scheduled Record Setup……………..…….………….…………
6.6 HDD Setup………………………………………………………
6.6.1 HDD Format/Clear………………..……………………….
6.6.2 Advanced HDD Setup……………..……………………….
6.7 Password Setup……………………………..…………………..
6.8 System Setup…………...………………………………………
6.9 RS-232/422/485 Setup…………..…………………….………..
6.10 Network Setup……………..…………………………………..
7
7
9
9
10
12
15
15
16
18
19
20
20
22
24
25
26
26
28
29
31
32
33
34
35
38
39
43
46
48
51
53
56
58
62
64
66
6
6.10.1 Notification Setup……………..…………………………..
6.10.2 FTP Setup……………..…………………………………..
6.10.3 3G Modem Setup…………….. .. .. .. ..…………………
6.10.4 Advanced Network Setup……………..…………………
7. PTZ Control……………………….………………………………
8. Search/Playback/Archive (Administrator/Supervisor)………....
8.1 Search By Time……………………………………….…………
8.2 Search By Event / Log Display………………………….………
8.3 Smart Search………………………..………….……….………
8.4 Search Archived Files………………………….……….………
8.5 Playback/Archive For Search By Time………….….….………
8.6 Playback/Archive For Search By Event…………………………
8.7 Playback/Archive For Smart Search……………………………
8.8 Playback For Archived Files……………………………………
9. Remote Access …………………………………………………..…
9.1 PC Remote Access…………………………………….…………
9.2 PDA/Mobile Phone Remote Access…………………….………
Appendix A – Specifications
Appendix B – Time Zone Table
Appendix C – Keyboard Control Protocol
Appendix D – MS-Windows HEM Utilities
69
70
71
73
75
77
78
80
82
85
86
90
90
91
92
92
101
102
104
106
108
7
1. Product Overview
The 960H/D1 realtime digital video/audio recorders are designed for use within a
surveillance system with limited space, and are a combination of a hard disk recorder,
a video multiplexer, and a web server. To achieve the highest inter-connectivity and
inter-operability, this series of digital video/audio recorders are all based on
industry-leading front-end to back-end surveillance infrastructure. With
state-of-the-art system architecture, powerful compression/decompression engine, and
intelligent recording algorithms, sixfold operation can be easily achieved without
sacrificing the increasing demands of functionality, performance, reliability, and
availability in the surveillance industry.
1.1 Features
!Up to 4 color and/or B/W cameras can be connected
!H.264 High Profile video compression/decompression with configurable quality
!ADPCM audio compression/decompression
!Real sixfold operation - simultaneous record, live, playback, backup, control, &
remote access
!Record/playback capabilities –
Full-D1/Half-D1/CIF: up to 120 (NTSC) / 100 (PAL) FPS,
960H: up to 120 (NTSC) / 100 (PAL) FPS.
!Realtime live display, 30 (NTSC) / 25 (PAL) IPS, for each channel
!Support HDMI output, VGA output, and TV output
!Support touch panel with USB interface
!Event recording, time-lapse recording or both
!Playback search by time or event (alarm, motion, & video loss)
!Smart search & playback
!Snapshot playback video
!Versatile display formats: full-screen & 4 split windows
!Digital zoom, X2 & X4
!Intelligent motion detection with programmable area and sensitivity
!Support privacy mask
!Powerful alarm processor with configurable triggering conditions and reactions
!Support push alarm notification to mobile phones
!One internal 3.5” SATA hard disk drive with storage > 3TB
!Support Advanced format HDD developed by Western Digital
!Video/audio backup to USB2.0 storage devices
!Ethernet interface for remote access through web browser or proprietary remote
software, remote alarm notification, FTP video/audio storage, remote setup, and
remote software upgrade
!Free DDNS server
!Support UPnP
!1 I.E./Firefox software for unlimited number of DVRs
!PTZ control capabilities & RS-485 keyboard control capabilities
!Multi-lingual support
!Multi-level password and authentication key protection to ensure high degree of
security
8
!Streaming video for mobile phone or PDA, no Apps required
!N-Streaming internet/intranet remote access
!Free iPhone/iPad/Android/Mac software app.
!Support mouse operation
9
2. Panels and Remote Controller
2.1 Front Panel
1. LED
Indicators for POWER (LIGHT) and HDD (BLINK).
2. Remote I/R Sensor
Used to receive signal from I/R remote controller.
10
2.2 Back Panel
1. Video Input Connectors (1-4)
Connect system cameras to these BNC connectors. The internal 75Ω
termination is always ON.
2. Main Out (MAIN OUT)
Connect TV monitor to the BNC connector for main/call monitor display.
3. Audio Output Connector (AUDIO OUT)
The connector supplies line-out audio signal to external devices such as
speakers. Recorded audio will be supplied from AUDIO OUT during
playback.
4. Audio Input Connector (AUDIO IN)
The RCA connectors accepts line-in audio signal supplied from external
devices such as microphone amplifiers.
5. VGA Connector (VGA)
Connect VGA monitor to the optional D-SUB 15-pin female connector for
main monitor display.
6. HDMI Connector
Connect HDMI monitor to the HDMI connector for main monitor display.
7. Ethernet Connector
Connect this unit to a 10/100Base-T Ethernet network through this port.
8. USB2.0 Connectors (USB)
Connect one of the USB 2.0 connectors to USB mouse. Connect the
Inhaltsverzeichnis
