Videocon WallCam Bedienungsanleitung

WallCam NVR

Quick Setup Guide

V-Con Intelligent Security Pvt. Ltd.

B-71 Phase VII, Industrial Area, Mohali -160055, Punjab (India)

Toll Free No. 1800 137 0030 I Email : customercare.[email protected]

www.videoconwallcam.com

Important Safeguards and Warnings

Do not place any heavy objects on the NVR.

Do not spill liquid onto the NVR

Please brush the printed circuit boards, connectors, fans, machine box and so on regularly.

Before cleaning the equipment, please switch off the power supply and unplug it.

Do not disassemble or repair the NVR by yourself. Do not replace the electronic components by yourself.

1. Production Introduction .............................................................................................................................................3

1.1 Product Overview..................................................................................................................................................3

1.2 Main Functions .....................................................................................................................................................3

2. Open-package check, products understanding and cable connections .....................................................................4

2.1 Open-package check ...........................................................................................................................................4

2.2 Understanding of the front panel ..........................................................................................................................4

2.3 Understanding of the rear panel ...........................................................................................................................6

2.4 Installation connections sketch map ..................................................................................................................... 6

3. Basic Operation .........................................................................................................................................................7

3.1 Login .....................................................................................................................................................................7

3.2 Preview .................................................................................................................................................................7

3.3 Desktop Shortcut Menu ........................................................................................................................................7

3.3.1 Guide ................................................................................................................................. .............................8

3.3.2 PlayBack ............................................................................................................................ ............................9

3.3.3 Record Mode ................................................................................................................................................10

3.3.4 PTZ Control ..................................................................................................................... ............................ 10

3.3.5 Highspeed PTZ .............................................................................................................................................11

3.3.6 Output Adjust ............................................................................................................................................... 11

3.3.7 Digital Channel ............................................................................................................................................ 12

3.3.8 Version Info ..................................................................................................................................................12

3.3.8.1 Version ...................................................................................................................... .............................12

3.3.8.2 HDD Info ................................................................................................................................................12

3.3.8.3 BPS ........................................................................................................................... .............................13

3.3.8.4 LOG ........................................................................................................................................................13

3.3.8.5 Online User ............................................................................................................................................14

3.3.9 Logout ..........................................................................................................................................................14

4. Main Menu .......................................................................................................................................... ....................15

4.1 General .............................................................................................................................................................15

4.2 Record...............................................................................................................................................................16

4.3 Network .............................................................................................................................................................18

4.3.1 Net Service ..................................................................................................................... ...........................18

4.4 Alarm ........................................................................................................................................ .........................20

4.4.1 Motion Detect .................................................................................................................. ............................21

4.4.2 Video Blind ...................................................................................................................... ............................22

Contents

4.4.3 Video Loss .................................................................................................................................................. 22

4.4.4 Alarm input ....................................................................................................................... ..........................23

4.4.5 Alarm output .................................................................................................................... ...........................23

4.4.6 Abnormality ................................................................................................................................................. 23

4.5 Switch .......................................................................................................................................... ....................24

4.5.1 Channel Type .................................................................................................................. ..........................24

4.5.2 Remote Device ............................................................................................................... ..........................25

4.5.3 Channel Status ........................................................................................................................................... 27

4.6 System Management ................................................................................................................... ....................27

4.6.1 HDD Manage .............................................................................................................................................. 28

4.6.2 PTZ conﬁguration ......................................................................................................... .............................29

4.6.3 GUI Display.................................................................................................................................................. 29

4.6.4 Backup ......................................................................................................................... ............................30

4.6.5 Account .......................................................................................................................... ............................31

4.6.7 Restore .......................................................................................................................... ............................33

4.6.8 Auto Maintain .............................................................................................................................................. 33

5. Network access settings and cloud technology introduced ............................................................... ................. 34

5.1 LAN access settings .................................................................................................................... ................... 34

5.2 Cloud technology functions and using introduction .................................................................... .....................36

5.3 Client CMS software operation .................................................................................................... ...................36

5.4 Mobile Phone monitoring ................................................................................................................................. 37

Appendix 1. Remote controller operation ................................................................................................. ................37

1. Production Introduction

1.1 Product overview

The NVR series which is an outstanding digital surveillance product has been designed

especially for security and defense sector.

It introduces embedded LINUX operating system which is more stable and robust and

also brings H.264/H.265 video compressed format and G.711A audio compressed format

which promises high quality images, low error coding ratio and single frame playing. To

achieve strong network communication and telecommunication ability it introduces the

TCP/IP network technology that runs seamlessly.

The NVR can be used individually or online connected as a part of a safety surveillance

network. With the professional network video surveillance software it achieves the strong

network communication and telecommunication ability

1.2 Main functions

Real-time surveillance

·VGA interface and HDMI interface surveillance functions through

monitor or display.

Storage

·NVR constantly writes massive data to storage so a new, healthy, and high-performance

disk is recommended.

·Special storage format which ensures the data safety.

Compression

· Real-time compression by individual hard disk which ensures the stable synchronization

of audio and video signals.

Backup

·Through SATA interface and USB interface such as USB equipment, removable hard

disk and so on.

·Download ﬁles through internet in the hard drive or USB.

Playback

·Individual real-time video recording as well as searching, playback, network surveillance,

recording check, downloading and so on.

·Multi-channel playback mode.

·Zoom at arbitrary region.

Internet operation

·Real time remote viewing, accessing Settings remotely, video downloading and backup

options.

·Remotely access PTZ.

·Remotely access the recording and real-time playback.

Alarm linkage

·Only one channel relays alarm output which is convenient for the alarm linkage and light

control at the spot. (Optional).

· protecting circuits at the alarm input and output interface which protects the main machine

from damage.

Communication interface

·Rs-485 interface which fulﬁlls the alarm input and PTZ control.

·Standard Ethernet network interface which fulﬁlls the telecommuting function.

·IPC signal input function.

·With USB interface, 3G and WIFI network connection

·Bluetooth Mouse.

·Fast copy and paste operating for the same setting.

·Support cloud access technology which makes network monitoring more easily

2. Open-package check, Products understanding and cable connection

2.1 Open-package check

When you receive the NVR, please inspect it thoroughly

First, please check whether there is any visible damage to the package appearance.

Then, please open the machine crust and check the data wire in the front panel, power

adapter, the connection between the fan power and the main board.

Note:

Labels which are afﬁxed on the products are very important. Please keep them protected

You will need to provide serial number of the product which is mentioned on the NVR in

case of contacting our customer service executives.

2.2 Understanding of the front panel

Front panel button operation function table

Note: This manual is a generic manual. Please ask the retailer for a detailed description about the product

NVR Front Panel

2. Cancel button ESC

Back to the previous menu or cancel operation in the

operation menu

Back to the real-time surveillance during the playback state

3. Play preview ﬁle button

Play previous video during the playback state

4. Play next ﬁle button

5. Show play

6. Fast play

7. Playback/pause button

8. play/pause button

9. Network connection

indicator light

Play next video during the playback state

Play in the multi-low or regular speed video during the

playback state

Play in the multi-fast or regular speed video during the

playback state

Playback the video or pause during the playback state

Play the video or pause during the playback state

Network connects normally if lighted

10. Alarm indicator light Trigger alarm if lighted

11. Power indicator light Trigger alarm if lighted

12. Recording indiacator light Trigger alarm if lighted

LINK

Table 2.1 Front panel button operation function table

No. Button name Mark Function

1. Direction button

Surveillance pictures, into the single channel or

multi-channel image surveillance.

Change the setting in the menu

Add or decrease number during the user edit state

Remove the cursor

< >

Remove the cursor when the main menu or sub menu is

popped up

Remove the cursor during the playback mode

Enter former or after channel surveillance during single

surveillance image

Enter

Main menu / function

Conﬁrm

Enter main menu or next grade menu

2.3 Understanding of the rear panel

Note: Below are rear panels of some of our representative models. Please take the real object as ﬁnal, these

are Just for reference

(1) Network interface (2) Audio input/ audio output (3) VGA output (4) HDMI interface

(5) USB3.0 interface (6) USB2.0interface (7) RS-485 interface video (8)Power jack

Note: Some models have front panel USB interface, this interface with the top of the rear panel USB port are

mutually exclusive, only one interface is effective at the same time. USB at the bottom of rear panel is

independent and effective.

2.4 Installation connections sketch map

3. Basic operation

3.1 Login

When the NVR boots up, the user must login and the system provides the corresponding

functions with the user right. There are 3 user settings: Admin, Guest and Default. The

default password for Admin user settings is ‘null’ and the user can create guest user

account as per requirement. Admin user is master user having all the rights. Guest and

default users can be allotted the rights as per requirements.

Password protection: The account will be blocked if you enter wrong password

continuously ﬁve times and after half an hour the same will be unblocked

automatically. If you enter wrong password for consecutively seven times then

the alarm will start. You can modify the username and password after ﬁrst login.

3.2 Preview

You can right click mouse to choose the switch between the windows.

The system date, time and channel name are shown in each viewing window. The

surveillance video and the alarm status are also shown in each window.

3.3 Desktop shortcut menu

On the right click of mouse, you will get the desktop shortcut menu as explained in

picture 3.2. The menu includes: Main Menu, Guide, Playback, Record Mode, PTZ control,

High-speed PTZ, Color Setting, Output Adjust, Info, Logout, View 1, View 4, View 8,

View 9, View 16 and Hide.

Picture 3.2 Desktop shortcut menu

Picture 3.1 SYSTEM LOGIN

Recording status

Motion detect

Video loss

Camera lock

3.3.1 Guide

This function can guide user to open ”Cloud service” → “QR code” → “Network conﬁg.”

→ “Remote device” and so on.

Picture 3.3 QR code

In“Network conﬁg.”, setting IP Address, Network Testing, Subnet Mask, Gateway, Primary

DNS, Secondary DNS, TCP Port, MTU Port, HTTP Port, HS Download, Transfer Policy

and so on. As picture 3.4:

In Network testing, test whether NVR is connected with router or other network device

properly.

Step: Input IP address directly and click PING. Picture 3.5.

Picture 3.5 Network Testing

3.3.2 Playback

Play the video ﬁles in the hard disk.

Select " desktop shortcut menu "→ "playback"→ "search"→"play" option will appear.

Note: The hard disk that saves the video ﬁles must be set as read-write or read-only

state.

1. HDD switch

2. recording search calendar

3. recording search

4. playback channel selection

5. playback page switch

6. playback time selection

7. Playback time period, click progress bar then can playback

8. playback ﬁle type

9. playback control keys

Synchronization: Mode: to realize multi-channel playback synchronously.

【Playbackcontrol】Refer to the following sheet for more information.

Form 3.2 Playback control key list

Picture 3.6 Playback

Button Function Button Function

Play/P ause Backward

Stop/Close Fast ba ck play

Special Functions:

Local zoom: When the system is in single-window full-screen playback mode, you can

drag your mouse in the screen to select a section and then left click mouse to select local

zoom. Press right click of the mouse to exit.

3.3.3 Record Mode (take 16CH NVR for example)

Please check current channel status: “●” means it is in recording status.

Picture 3.7 record mode

Schedule: It records according to the set parameters in “main menu” “record” “record plan”.

Manual: You can either select all channels or any particular channels for recording as

per your requirements.

Stop: To stop recording, you can select all channels or speciﬁc channels.

3.3.4 PTZ Control

The Functions include PTZ direction control, step, zoom, focus, IRIS, setup operation,

patrol between spots, trail patrol, boundary scan, assistant switch, light switch, level

rotation and so on.

The operational interface is as follows:

Full screen Fast play

Previous frame Next fram e

Previous file Next file

Circulation Cut (some models without)

Form 3.2 Playback control key list

3.3.5 High Speed PTZ

Speed: Set the PTZ rotation range. Default range: 1 ~ 8.

Zoom: Click - / + button to adjust the zoom.

Focus: Click - / + button to adjust the focus of the camera

Iris: Click - / + button to adjust the iris of the camera.

Direction control: Control the PTZ rotation. Supports 8 directions controls .

PTZ Trace: Full-screen shows channel image. Press left click of the mouse to control

PTZ rotation orientation.

Set: Enter the function operation menu.

Page Switch: Switch between different windows

Picture 3.9 Output

Picture 3.6 Playback

After choosing, it displays the chosen channel in full screen mode. Click left button of

mouse to control the PTZ to fast move and orientation. can adjust camera’s magniﬁcation

function by moving mouse roller

3.3.6 Output adjust

Adjust output area parameters

3.3.7 Digital Channel

System Information menu items include:onekeyadd, Channel Management,

ChannelStatus.

3.3.8 Version Info

System Information menu include: Version, HDD Info, BPS, LOG, Online Users.

3.3.8.1 Version

Displays the basic information such as hardware information, software version,

MAC,issue date and Serial No and so on.

Note 1: The Serial No is needed when using cloud technology, please enter the

Serial No correctly for remote access otherwise you can’t login.

Note 2: MAC is the MAC address of the device, also is the device mark when login by

device with ARSP service; please enter the MAC address correctly while using ARSP

service to access device remotely otherwise you can’t login.

（SomemodelwithoutARSPfunction）。

Picture 3.10 Version information

3.3.8.2 HDD Info

Display the hard disk state: hard disk type, overall capability, residual capability,the

recording time and so on.

3.3.8.3 BPS

Picture 3.12 Code stream statistics

Picture 3.11 hard disk information

Displays the code stream Kb/S and hard disk capability MB/H in real time.

3.3.8.4 LOG

Look up system log according to the set mode.

Log information includes: system operation, conﬁguration operation, data management,

alarm affair, recording operation, user management, and ﬁle management and so on. Set

the time section to look up and click the look up button. The log information will display as

a list. You can press delete button to clear all the log information.

Picture 3.13 log information

3.3.8.5 Online User

Look up the network user information in the local NVR. You can lock the user by selecting

the user and then pressing disconnect button. The user will be locked until next boot-strap.

Picture 3.14 online user.

3.3.9 Logout

Logout, shutdown the system or reboot up.

Logout: Logout from the device.

Shutdown: The device will shut down

Reboot: The device will restart

4. Main menu

Picture 4.1 Main menu

After login in, on the right click of mouse, the shortcut menu will appear at the bottom of

the screen. To enter the main menu interface, left click the mouse.

General information conﬁguration.( as shown in Picture 4.1 Main menu)

Language: choose related operating language

Video standard: Set Device’s video system (PAL or NTSC are optional)

Resolution: Set output resolution

System time: Set Device’s current date &time and date & time format

HDD full: Stop: the hard drive is full, stop recording.

Select overwrite: when the hard drive is full, overwrite the earliest recorded ﬁles.

NVR No: using under the situation one remote controller controls many NVRs. Only

click “ADD” on remote control and enter local number, the related NVR can respond.

Re: when “Local No “is “0”

Transparency: Adjust the transparency or operating menu

Tour: set screen tour display shows tour was opened. Single screen, four screens, eight

screens, nine screens, sixteen screens etc. separate mode and mixed mode tour are

optional. (As16CHforexampleasbelow)

4.1 General

Picture 4.2Tour setting

4.2 Record

Set recording parameter (main stream) and network parameter (extra stream) of video and

audio signal.

Set the Device’s recording plan.

Note: There is at least one read-write hard disk.

Picture 4.3 Record conﬁg

Channel: Choose the corresponding channel number to set the channel. Select all the

options to set all the channels

Set: Recording parameter (main stream) and network parameters (extra stream) illustrate

Video/Audio: Set whether to record video and audio simultaneously.

Resolution: Set recording resolution. The Higher resolution, the better recording quality

and occupies more HDD capacity. Conversely, the lower resolution, the worse recording

quality

occupies less HDD capacity.

Frame Rate (FPS): set recording FPS; if the FPS is higher then it will provide better

recording quality and occupy more HDD space. If the FPS is low then it will occupy less

HDD space hence, low video quality.

Bit Rate Type: Set whether recording stream changes automatically according to image

changes. There are six grades to choose from as per your requirements

Quality: Adjust the video quality.

Bit Rate (Kb/S): set recording stream statics under ﬁxed stream state; if the Higher Stream

statics is selected then recording quality will be better and occupies more HDD capacity.

Conversely, the lower Stream statics will result in the low recording stream statics quality

and occupies less HDD capacity.

Note: when NVR cannot identify the IP camera, the above recording parameter can

be set manually. The device will record according to selected setting.

Picture 4.4 Recording Plan

Channel: Choose the corresponding channel number to set the channel. Choose all the

options to set all channels.

Redundancy: Choose the redundancy function option to implement the double backup ﬁle

function. Double backup is writing the video ﬁles in two hard disks. When you do the

double backup, make sure that there are two hard disks installed. One is read-write disk

and the other is redundant disk.

Length: Set the time length of each video ﬁle. 60minutes is default duration (A maximum

of 120 minutes can be selected).

Pre Record: Record 1-30 seconds before the action. (Time length is decided by the code

stream)

Mode: Set video state: conﬁguration, all or stop.

Schedule: You can select recording type i.e. Regular, Alarm (Detect) and time based

recording.

Manual: after choosing manual button, the related channel will carry common recording

irrespective of the current state of the channel.

Stop:Click the stop button to stop recording of the channel.

Week: You can set any particular day or even full week for recording. It will record

according to selected days.

Period: Set the time section of common recording, the recording will start only in the set

range.

Recording type: Set recording type: regular, detection or alarm.

Regular: Perform the regular recording in the set time section.

Detect:The alarm will be triggered and recording will be turned on in case camera

signals video loss or covered with mask.

Alarm Trigger the external alarm signal in the set time section. When above alarm is

set as opening recording, the “detection recording” state is on.

4.3 Network

Picture 4.5 network setup

Net Link Mod: Select automatically or enter IP address manually.

IP address: Set the IP address.

Subnet Mask: Set the subnet mask code.

Gateway: Set the default gateway.

Primary DNS: Set Preferred DNS

Secondary DNS: Set spare DNS

Media port: Set port for recording network transmission

HTTP port: Set HTTP Port

Net Service: set all network services. Pls refer 4.3.1 network service to have detailed

setting description.

Advanced network functions on the conﬁguration, double-click the Net Service button to

enter the Picture 4.6 interface, ﬁrst select the Network Services entry and click the

Settings button, or double-click the service parameter conﬁguration items.

4.3 1.Net Service

Picture 4.6 network service

Andere Handbücher für WallCam

Inhaltsverzeichnis

Andere Videocon DVR Handbücher

Videocon

Videocon WallCam Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

FSM

FSM Colibri Grande PRO Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung