Viessmann Vitodens 100-W Kurzanleitung
Installation and service
instructions
for contractors
VIESMANN
Vitodens 100-W
Type WB1B, 7.9 to 35.0 kW
Wall mounted gas condensing boiler
Natural gas and LPG version
Gas Council no.: 41-819-21; 41-819-22; 41-819-23; 41-819-24;
41-819-25
For applicability, see the last page
VITODENS 100-W
5368 662 GB 1/2012 Please keep safe.
2
Please follow these safety instructions closely to prevent accidents and mate-
rial losses.
Safety instructions explained
Danger
This symbol warns against the
risk of injury.
!Please note
This symbol warns against the
risk of material losses and envi-
ronmental pollution.
Note
Details identified by the word "Note" con-
tain additional information.
Target group
These instructions are exclusively
designed for qualified personnel.
■ Work on gas equipment must only be
carried out by a qualified gas fitter.
■ Work on electrical equipment must
only be carried out by a qualified elec-
trician.
■ The system must be commissioned by
the system installer or a qualified per-
son authorised by the installer.
Regulations
Observe the following when working on
this system
■ all legal instructions regarding the pre-
vention of accidents,
■ all legal instructions regarding envi-
ronmental protection,
■ the Code of Practice of relevant trade
associations,
■ all current safety regulations as
defined by DIN, EN, DVGW, TRGI,
TRF, VDE and all locally applicable
standards,
■ Gas Safety (Installation & Use) Regu-
lations
– the appropriate Building Regulation
either the Building regulations, the
Building Regulation (Scotland),
Building Regulations (Northern Ire-
land),
– the Water Fittings Regulation or
Water Bylaws in Scotland,
– the current I.E.E. Wiring Regula-
tions.
If you smell gas
Danger
Escaping gas can lead to explo-
sions which may result in serious
injury.
■ Never smoke. Prevent naked
flames and sparks. Never
switch lights or electrical appli-
ances ON or OFF.
■ Close the gas shut-off valve.
■ Open windows and doors.
■ Remove all people from the
danger zone.
■ Notify your gas or electricity
supplier from outside the build-
ing.
■ Shut off the electricity supply to
the building from a safe place
(outside the building).
Safety instructions
Safety instructions
5368 662 GB
3
If you smell flue gas
Danger
Flue gas can lead to life-threat-
ening poisoning.
■ Shut down the heating system.
■ Ventilate the boiler room.
■ Close all doors leading to the
living space.
Working on the system
■ When using gas as fuel, also close the
main gas shut-off valve and safeguard
against unauthorised reopening.
■ Isolate the system from the power sup-
ply and check that it is no longer 'live',
e.g. by removing a separate fuse or by
means of a main isolator.
■ Safeguard the system against unau-
thorised reconnection.
!Please note
Electronic modules can be dam-
aged by electro-static dis-
charges.
Touch earthed objects, such as
heating or water pipes, to dis-
charge static loads.
Repair work
!Please note
Repairing components which ful-
fil a safety function can compro-
mise the safe operation of your
heating system.
Replace faulty components only
with original Viessmann spare
parts.
Ancillary components, spare and
wearing parts
!Please note
Spare and wearing parts which
have not been tested together
with the heating system can com-
promise its function. Installing
non-authorised components and
non-approved modifications/con-
version can compromise safety
and may invalidate our warranty.
For replacements, use only orig-
inal spare parts from Viessmann
or those which are approved by
Viessmann.
Safety instructions
Safety instructions (cont.)
5368 662 GB
4
Installation instructions
Preparing for installation
Product information.............................................................................................. 5
Preparing for installation....................................................................................... 6
Installation sequence
Fitting the boiler and making connections............................................................ 9
Opening the control unit casing............................................................................ 14
Electrical connections........................................................................................... 14
Service instructions
Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance.......................................... 18
Further details regarding the individual steps....................................................... 19
Troubleshooting
Function sequence and possible faults................................................................ 31
Fault messages on the display............................................................................. 32
Repairs................................................................................................................. 37
Gas type conversion
Changing from LPG to natural gas....................................................................... 44
Control unit
Functions and operating conditions in weather-compensated mode................... 47
Designs
Connection and wiring diagram............................................................................ 49
Parts lists............................................................................................................ 51
Specification....................................................................................................... 54
Certificates
Declaration of conformity...................................................................................... 55
Keyword index.................................................................................................... 56
Index
Index
5368 662 GB
5
Vitodens 100-W, WB1B
Preset for operation with natural gas.
Conversion to LPG P requires a gas conversion kit.
In principle, the Vitodens 100-W may only be supplied to the countries listed on the
type plate. For deliveries to alternative countries, an approved contractor, on his own
initiative, must arrange individual approval in accordance with the law of the country
in question.
Preparing for installation
Product information
5368 662 GB
Installation
6
Preparing for the boiler installation
Dimensions and connections
119
600 43
26
151
a
93
47
25
375
b
A B
C
D
5
AHeating flow 7 22 mm
BHeating return 7 22 mm
CCondensate drain: Plastic hose
7 22 mm
DGas connection R ½
Rated heating output
range
kW 7.9 - 13 7.9 - 16 7.9 - 19 7.9 - 26 11.0 - 35
a mm 285 285 285 285 340
b mm 123 123 123 123 171
Preparing for installation
Preparing for installation
5368 662 GB
7
Fitting the wall mounting bracket
25
150
Ø10
≥250
A
B
AVitodens installation template BOpening for the balanced flue
Preparing for installation
Preparing for installation (cont.)
5368 662 GB
Installation
8
1. Align the supplied installation tem-
plate on the wall.
2. Drill 7 10 mm holes and insert the
rawl plugs supplied.
3. Fit wall mounting bracket with screws
supplied.
Preparing the connections
!Please note
To prevent equipment damage,
install all pipework free of load
and torque stresses.
1. Prepare the water connections. Flush
the heating system.
2. Prepare the gas connection.
3. Prepare the electrical connections.
Observe applicable IEEE standards.
■ A 1.5 m power cable is fitted in the
delivered condition.
■ A 1.5 m connecting cable for the
circulation pump is provided sepa-
rately.
■ Accessory cables:
NYM-O two-core min. 0.5 mm2.
Preparing for installation
Preparing for installation (cont.)
5368 662 GB
9
Removing the front panel and mounting the boiler
3.
2.
1.
2x
1. Undo screws at the bottom of the
boiler; do not remove completely.
2. Remove front panel.
3. Hook the boiler into the wall mounting
bracket.
Note
Align the boiler vertically or horizon-
tally on all three axes.
Installation sequence
Fitting the boiler and making connections
5368 662 GB
Installation
10
Making connections on the water side
A BA B
AHeating water flow
BHeating water return
Note
Install a shut-off valve and drain & fill
valve on site in the heating water
return.
Y-plan system
A
B
E
F F
C
D
ACylinder
BVitodens 100-W
CCirculation pump
DFeed and expansion tank
Installation sequence
Fitting the boiler and making connections (cont.)
5368 662 GB
Andere Handbücher für Vitodens 100-W
41
Inhaltsverzeichnis
Andere Viessmann Kessel Handbücher
Viessmann
Viessmann VITODENS 100-W P25 Bedienungsanleitung
Viessmann
Viessmann VITOLIGNO 300-P Betriebsanleitung
Viessmann
Viessmann VITOGAS 100 Betriebsanleitung
Viessmann
Viessmann Vitodens 242-F Kurzanleitung
Viessmann
Viessmann Vitodens 050-W BP JD Kurzanleitung
Viessmann
Viessmann VITOCELL 100-V Kurzanleitung
Viessmann
Viessmann Vitodens 200-W B2HA series Kurzanleitung
Viessmann
Viessmann Vitoladens 300-C Bedienungsanleitung
Viessmann
Viessmann VITOTRONIC 200 Bedienungsanleitung
Viessmann
Viessmann Vitoladens 300-C Kurzanleitung
Viessmann
Viessmann Vitorondens 200-T Series Bedienungsanleitung
Viessmann
Viessmann Vitodens 200-W System Betriebsanleitung
Viessmann
Viessmann Vitorond 100 Kurzanleitung
Viessmann
Viessmann Vitodens 200-W System Bedienungsanleitung
Viessmann
Viessmann Vitocrossal 200 CM2 246 Bedienungsanleitung
Viessmann
Viessmann VITOCROSSAL 300 Bedienungsanleitung
Viessmann
Viessmann Vitola 200 Bedienungsanleitung
Viessmann
Viessmann Vitotron 100 Kurzanleitung
Viessmann
Viessmann Vitodens 200-W B2HA series Kurzanleitung
Viessmann
Viessmann VITOLIGNO 300-C Kurzanleitung
Beliebte Kessel Handbücher anderer Marken
Vaillant
Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung
Radijator
Radijator BIO max 23.1 Bedienungsanleitung
Brunner
Brunner BSV 20 Bedienungsanleitung
Buderus
Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung
Potterton
Potterton 50e Datenblatt
UTICA BOILERS
UTICA BOILERS TriFire Bedienungsanleitung
