Viking Designer Topaz Bedienungsanleitung

User’s Guide

KEEPING THE WORLD SEWING™

This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always be followed, including the following:

Read all instructions before using this household sewing machine.

DANGER –To reduce the risk of electric shock:

• A sewing machine should never be left unattended when plugged in. Always unplug this sewing machine

from the electric outlet immediately after using and before cleaning.

• Always unplug before relamping. Replace bulb with same type rated 5 Watt.

WARNING –To reduce the risk of burns,Àre,electric shock,

or injury to person:

• This sewing machine is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of

the sewing machine by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the sewing machine.

• Use this sewing machine only for its intended use as described in this manual. Use only attachments

recommended by the manufacturer as contained in this manual.

• Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has

been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized

dealer or service center for examination, repair, electrical or mechanical adjustment.

• Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the

sewing machine and foot controller free from the accumulation of lint, dust, and loose cloth.

• Keep Àngers away from all moving parts. Special care is required around the sewing machine needle.

• Always use the proper needle plate. The wrong plate can cause the needle to break.

• Do not use bent needles.

• Do not pull or push fabric while stitching. It may deÁect the needle causing it to break.

• Wear safety glasses.

• Switch the sewing machine off (“0”) when making any adjustment in the needle area, such as threading

needle, changing needle, threading bobbin, or changing presser foot, etc.

• Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when

making any other user servicing adjustments mentioned in the instruction manual.

• Never drop or insert any object into any opening.

• Do not use outdoors.

• Do not operate where aerosol (spray) products are being used or where oxygen is being administrated.

• To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• This sewing machine is provided with double insulation. Use only identical replacement parts.

See instructions for Servicing of Double-Insulated Appliances.

SAVETHESE INSTRUCTIONS

SERVICING OF DOUBLE INSULATED PRODUCTS

In a double-insulated product, two systems of insulation are provided instead of grounding. No ground means is provided

on a double-insulated product, nor should a means for grounding be added to the product. Servicing of a double-insulated

product requires extreme care and knowledge of the system and should be done only by qualiÀed service personnel.

Replacement parts for a double-insulated product must be identical to those parts in the product. A double-insulated product

is marked with the words ‘DOUBLE INSULATION’ or ‘DOUBLE INSULATED’.

Set Up

Page 10-31

Sewing Mode

Page 32-44

Embroidery Set Up

Page 55-58

Taking care of the

machine

Page 68-70

Stitch and alphabet overview,page 71-73

Machine overview and accessories,page 6-9

Embroidery Mode

Page 59-67

Basic Sewing

Techniques

Page 45-54

Table of contents

Machine overview............................................................6

Included accessories........................................................8

1.Set Up

Unpacking........................................................................10

Connecting the foot control cord..............................10

Connect the power cord and foot control..............10

Packing away after sewing............................................11

Extended Sewing Surface.............................................11

Using the free arm.........................................................11

Spool pins and spool caps............................................12

Threading the UpperThread.......................................13

Needle threader.............................................................14

Cutting the thread.........................................................14

Threading for twin needles..........................................15

Thread sensor.................................................................15

BobbinWinding,model 20...........................................16

BobbinWinding,model 30...........................................17

Inserting the bobbin......................................................18

Thread tension................................................................19

EXCLUSIVE SENSOR SYSTEM™ (ESS)...................19

Lower the feed teeth....................................................20

Changing the presser foot............................................20

Changing the needle......................................................20

Needles............................................................................21

Threads.............................................................................22

Pictogram Pen.................................................................22

Stabilizers.........................................................................22

USB port..........................................................................23

USB embroidery stick...................................................23

5D™ Embroidery Software.........................................24

How to Update your machine....................................24

Function Buttons............................................................25

Touch Panel overview...................................................27

SET Menu.........................................................................28

2.Sewing Mode

Sewing Mode overview.................................................32

Selecting a stitch

.............................................................33

Selecting a font...............................................................33

Exclusive SEWINGADVISOR™................................34

Stitch Settings..................................................................35

Programming...................................................................37

My Stitches Menu...........................................................40

Sewing pop-up messages..............................................41

3.Basic SewingTechniques

Seam..................................................................................45

Overcast...........................................................................45

Seam and Overcast........................................................46

Baste..................................................................................47

Darning and Mending....................................................47

Hem...................................................................................48

Blind Hem........................................................................49

Sewing buttonholes.......................................................50

Sewing on buttons.........................................................52

Sewing zippers................................................................53

Taper Satin Stitch,model 30........................................54

4.Embroidery Set Up

Embroidery unit overview...........................................55

Embroidery hoop overview.........................................55

Designs.............................................................................55

Connect the embroidery unit.....................................56

Remove the embroidery unit......................................56

Hoop the fabric..............................................................57

Slide on the hoop...........................................................57

Getting started embroidering.....................................58

5.Embroidery Mode

Embroidery Mode overview........................................59

Load a design...................................................................60

Load a font.......................................................................60

Embroidery information...............................................61

Adjust designs.................................................................62

Hoop options..................................................................63

Embroidery functions....................................................64

Embroidery pop-up messages.....................................65

4.Taking care of the machine

Changing the light bulbs...............................................68

Cleaning the machine....................................................68

Trouble shooting............................................................69

Stitch table - menu 1.Utility stitches.........................71

Stitch overview...............................................................73

Alphabets.........................................................................73

Index.................................................................................74

Machine overview

1. Lid

2. Pre-Tension thread guide

3. Thread tension discs

4. Thread take-up lever

5. Thread tension for bobbin winding

6. Thread slots

7. Function Button Panel

8. Thread cutter

9. Light bulbs

10. Sensor One-Step Buttonhole Foot

socket

11. Built-In Needle threader

12. Presser foot

13. Stitch plate

14. Bobbin cover

15. Free arm

16. Drop feed teeth switch

17. Button ruler and built-in tape measure

18. Base plate

19. Needle bar with needle clamp screw

20. Presser bar

21. Presser foot ankle

22. Stitch panel

23. Main spool pin

24. Spool caps

25. Auxiliary spool pin

26. Bobbin winding lever (model 30)

27. Bobbin winder (model 30)

28. Thread cutter for bobbin winding

(model 30)

29. Bobbin winding thread guide

30. Handwheel

31. GraphicDisplay

32. Touch Panel

33. Built-in USB port

34. ON/OFF switch, connectors for

power cord and foot control

Front side

35. Bobbin stop (model 20)

36. Bobbin winder (model 20)

37. Thread cutter for bobbin winding (model 20)

Rear side

38. Handle

39. Embroidery unit connection socket

Parts of the embroidery unit

(For model 30 type BE18, for model 20 type BE19)

40. Embroidery unit socket

41. Embroidery arm

42. Embroidery unit release button (underside)

43. Embroidery hoop attachment

44. Level adjusting feet

Accessory tray

There are special places for presser feet and bobbins in the

accessory tray, plus space for needles and other accessories. Store

the accessories in the tray so they are easily accessible.

45. Space for accessories

46. Removable presser feet and bobbin holder

48 49

50 51

52 53 54

57 58

Included accessories

47. 2 thread nets. Slide on the spool when using synthetic threads

that easily unwind.

48. Screwdriver

49. Ligth bulb remover

50. Seam ripper

51. Brush

52. 2 non-Stick glide plates

53. 2 felt pads

54. 2 spool caps, large (1 attached to the machine upon delivery)

55. Spool cap, small

56. Spool cap, medium (attached to the machine upon delivery)

57. 6 bobbins (one in machine upon delivery)

58. Multipurpose tool/Button reed

59. USB embroidery stitck (1 GB)

60. Hoop Clips (16 with model 30, 10 with model 20)

61. Pictogram Pen

Hoops Included

62. DESIGNER™ Royal Hoop, 360x200mm (Only with model 30)

63. DESIGNER™ Crown Hoop, 260x200mm (Only with model 20)

64. DESIGNER™ Splendid Square Hoop, 120x120mm

Accessories Included - not in picture

• Scissors

• Needles

• Carrying case (attached on the machine upon delivery)

• Foot control

• Foot control cord

• Power cord

• Embroidery thread

• Pieces of fabric and stabilizer

• 5D™ Embroidery Machine Communication CD

• DESIGNER TOPAZ™ Sampler CD

• DESIGNER TOPAZ™ 30 Bonus Sampler CD (Only with

model 30)

• DESIGNER TOPAZ™ Sampler Book

• User´s Guide

• Quick Guide

• Accessory User’s Guide

• Warranty card

Presser feet

7Utility Foot A Attached on the machine upon delivery. This foot is used mainly for

straight stitching and zigzag stitching with a stitch length longer than 1.0.

7Decorative Stitch

Foot B When sewing decorative stitches or short zigzag stitches and other utility

stitches with less than 1.0 mm stitch length, use this foot. The tunnel on

the underside of the foot is designed to feed smoothly over the stitches.

7Buttonhole Foot C This foot is used for sewing buttonholes step by step. Use the guide lines

on the toe of the foot to position the garment edge. The two tunnels

on the bottom of the foot ensures a smooth feed over the buttonhole

columns. The Ànger on the back of the foot holds cording for corded

buttonhole.

Blind Hem Foot D This foot is used for blind hem stitches. The inner edge of this foot

guides the fabric. The right toe of the foot is designed to ride along the

hem edge.

7Zipper Foot E This foot can be snapped on either to the right or to the left of the

needle, making it easy to sew close to both sides of the zipper teeth.

Move needle position to right or left to sew closer to zipper teeth or for

covering large cording.

7Non-Stick Glide

Foot H This foot, with a non-stick coating underneath, is used when sewing

foam, vinyl, plastic or leather to minimize the risk of these materials

sticking to the foot.

Edging Foot J This foot is used for overcasting and seam/overcasting. Stitches form

over the pin which prevents puckering at the edge of the fabric.

Embroidery/

Darning Foot R This foot is used for free motion embroidery/quilting/stitching and hoop

embroidery.

7Decorative Stitch Foot

B Transparent A clear foot for decorative sewing makes it easy to match stitches. Same

tunnel on the underside as Presser Foot B.

Sensor One-Step

Buttonhole Foot When connected to the machine, the buttonhole is sewn in a suitable

length to the button size that has been entered into the machine.

OFF

123

Set Up

1.Set Up

Unpacking

1. Place the machine on a sturdy, Áat surface, remove the

packaging and lift off the cover.

2. Remove the packing material and the foot control.

3. The machine is delivered with an accessory bag, a power cord

and a foot control cord.

4. Wipe the machine, particularly around the needle and stitch

plate to remove any soil before sewing.

Connecting the foot control cord

Among the accessories you will Ànd the foot control cord and

the power cord. Connecting the foot control cord to the foot

control is only necessary the very Àrst time you are going to use

the machine.

1. Take out the foot control cord. Turn the foot control over.

Connect the cord to the socket inside the space of the foot

control.

2. Push Àrmly to make sure it is properly connected.

3. Lay the cord in the slot on the underside of the foot control.

Connect the power cord and foot

control

On the underside of the machine you will Ànd information about

the power supply voltage (V) and the frequency (Hz).

Note: Before plugging in the foot control, check to ensure that it is of type

“FR5” (see underside of foot control).

1. Connect the foot control cord to the front socket on the

bottom right side of the machine (1).

2. Connect the power cord to the rear socket on the bottom

right side of the machine (2).

3. Press the ON/OFF switch to ON to turn on power and light

(3).

For the USA and Canada

This sewing machine has a polarized plug (one blade wider

than the other). To reduce the risk of electric shock, this

plug is intended to Àt in a polarized outlet only one way. If

the plug does not Àt fully in the outlet, reverse the plug. If

it still does not Àt, contact a qualiÀed electrician to install

the proper outlet. Do not modify the plug in any way.

Inhaltsverzeichnis

Andere Viking Nähmaschine Handbücher

Viking

Viking Designer Ruby Bedienungsanleitung

Viking

Viking Turissa Service-Handbuch

Viking

Viking Emerald 203 Bedienungsanleitung

Viking

Viking Huskylock S15 Bedienungsanleitung

Viking

Viking Huskystar 207 Bedienungsanleitung

Viking

Viking Huskystar 215 Bedienungsanleitung

Viking

Viking 3260 Bedienungsanleitung

Viking

Viking Interlude 445 Bedienungsanleitung

Viking

Viking 2780 Bedienungsanleitung

Viking

Viking Huskystar C10 Bedienungsanleitung

Viking

Viking H|Class 500E Bedienungsanleitung

Viking

Viking ER10 Bedienungsanleitung

Viking

Viking Scandinavia 300 Bedienungsanleitung

Viking

Viking Turissa Gebrauchsanweisung

Viking

Viking Designer EPIC Bedienungsanleitung

Viking

Viking Designer I Bedienungsanleitung

Beliebte Nähmaschine Handbücher anderer Marken

Riccar

Riccar RL634DE Bedienungsanleitung

Pfaff

Pfaff 3307-1 SERIES Bedienungsanleitung

Siruba

Siruba C007JP Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer SE Bedienungsanleitung

Singer

Singer 148-5 Bedienungsanleitung

IKEA

IKEA SY Bedienungsanleitung

Pfaff

Pfaff 571 Bedienungsanleitung

Singer

Singer 15-91 Bedienungsanleitung

Brother

Brother BB370 Bedienungsanleitung

Pegasus

Pegasus WT100 Series Bedienungsanleitung

Reliable

Reliable 7100DB Bedienungsanleitung

Pfaff

Pfaff 937 Bedienungsanleitung

Singer

Singer 6038 Bedienungsanleitung

Singer

Singer 413K Bedienungsanleitung

Pfaff

Pfaff 1471 E1 Bedienungsanleitung

Kenmore

Kenmore 16677 - Serger Sewing Machine Bedienungsanleitung

HIGHLEAD

HIGHLEAD GC2008-M Bedienungsanleitung

Singer

Singer 400W4 Bedienungsanleitung