Viking Huskystar 207 Bedienungsanleitung

Huskystar

207/215

Typ B

Service manual

Printed and

MadeinSweden

Feb-2001 104 72 51-26

Huskystar 207, 215

Contence

FACECOVER ............................................................................................................................................. 3

MOTORCOVER ......................................................................................................................................... 3

BASEPLATE.............................................................................................................................................. 4

FRONTCOVER .......................................................................................................................................... 5

REARCOVER............................................................................................................................................. 6

LOWERTHREAD TENSION ....................................................................................................................... 7

UPPERTHREADTENSION ........................................................................................................................ 8

PRESSER BARHEIGHT ANDALIGNMENT ............................................................................................... 9

TURNINGMOVEMENT OFTHE NEEDLE INZIG-ZAGAND THEPLAYOF THEWORM GEAR ............... 10

NEEDLEDROP ..........................................................................................................................................11

CLEARANCEBETWEEN NEEDLE AND HOOK (ADJUSTMENT METHOD NO.1- Sewinghead) ........... 12

CLEARANCEBETWEENNEEDLE ANDHOOK(ADJUSTMENT METHODNO.2-HOOK)......................... 13

FEEDDOGHEIGHT.................................................................................................................................. 14

NEEDLEBARHEIGHT.............................................................................................................................. 15

NEEDLETIMING TO SHUTTLE................................................................................................................ 16

BUTTONHOLEFEEDBALANCE .............................................................................................................. 17

BARTACK FEEDOFBUTTONHOLE ........................................................................................................ 18

FEEDBALANCE ONSTRETCH STITCH .................................................................................................. 19

CAM FOLLOWERS LIFTING HEIGHT (For Model 215 only) ................................................................. 20

CAM FOLLOWERS LIFTING HEIGHT- (For Model 207 only) ................................................................. 21

ZEROINGTHE NEEDLE -(For Model 215 only) ....................................................................................... 22

MOTORBELT TENSION .......................................................................................................................... 23

WIRING .................................................................................................................................................... 24

Huskystar 207, 215

( C )

( B )

( A )

( E )

To remove.

1. Remove the face cover (D) by removing the cap (A) and screw (B).

To attach.

2. Attach the face cover (D) with the set screw (B), then, attach the cap (A).

1. Loosen screw (C).

2. Take the motor cover away.

MOTOR COVER

FACE COVER

Huskystar 207, 215

( A )

BASE PLATE

To remove.

1. Remove 4 screws (A).

2. Remove the base plate.

To attach.

3. Follow the above procedure in reverse.

0DULQDV/LWWOH6KRSSHRQH%D\

Huskystar 207, 215

( A )

( F )

( H )

( C )

( G )

( J )

( E )

( B )

( I )

( D )

FRONT COVER

To remove.

1. Remove the face cover, and motor cover.

2. Loosen set screws (A), (B), (C), (D) and then, remove the front cover (J) by removing set

screws (E), (F) and (G).

Note! Remove the hook (H) first, then hook (I).

To attach.

3. Follow the above procedure in reverse.

Huskystar 207, 215

(A) ( B )

( E )

( I )

( C )

( F )

( D )

( H )

( G )

( J )

( Y )

( X )

( Z )

( K )

REAR COVER

To remove.

1. Remove the face cover and motor cover.

2. Pull up the spool pins (K).

Loosen set screws (A), (B), (C) and (D: 2 pcs.), then remove the rear cover (I) by

removing the set screws (E), (F), (G) and (H).

Note! Remove the rear cover in the order of lower part (X), upper part (Y) and presser

bar lifter part (Z).

Note! Remove the bed cover plate (J) together.

To attach.

3. Follow the above procedure in reverse.

Huskystar 207, 215

(A)

( D )

( C )

LOWER THREAD TENSION

Check.

Set the bobbin in the bobbin case and pass a thread through the tension spring.

The lower thread tension should be between 25 and 35 grams when pulling the thread in the

direction of (A).

Adjustment.

1. If the lower thread tension is too tight, turn the adjusting screw (B) in the direction of (C).

2. If the lower thread tension is too loose, turn the adjusting screw (B) in the direction of (D)

Huskystar 207, 215

( B )

( D )

( C )

UPPER THREAD TENSION

The standard upper thread tension should be between 65 and 95 grams when pulling a cotton

size 50 thread in the direction of (A) with the tension dial at “3”. The presser foot should be

lowered when checking the upper thread tension.

Adjustment

1. Remove the front cover.

2. Turn the adjusting nut (B) in the direction of (C) when the upper thread tension is too tight.

Turn the adjusting nut (B) in the direction of (D) when the upper thread tension is too

loose.

3.Attach the front cover.

Huskystar 207, 215

Set screw (C)

( B )

(A)

( E )

( F )

6,0mm

PRESSER BAR HEIGHT AND ALIGNMENT

Check.

1. Raise the presser bar lifter (A).

2. The distance between the presser foot (D) and the needle plate (E) should be 6.0 mm.

Adjustment.

1. Remove the face cover.

2. Remove the screw (B) and take the lamp socket off.

3. Raise the presser foot lever and loosen the hexagon socket screw (C) on the presser

barholder.

Adjust the distance between the zigzag foot (D) and the needle plate (E) to 6.0 mm.

4. Tighten the screw (C) securely.

5. Tighten the screw (B) to secure the lamp socket.

6.Attach the face cover.

Note! When you tighten the screw (C), make sure that both sides of the presser foot are parallel

to the feed dog slots (F) on the needle plate.

Huskystar 207, 215

2-3mm

(A)

( B )

TURNING MOVEMENT OF THE NEEDLE IN ZIG-ZAG

AND THE PLAY OF THE WORM GEAR

In sewing zigzag zigzag stitch (with maximum zigzag width), if the needle bar starts moving

sideways while the needle is in the fabric, adjust the needle swing according to the following

procedure:

To adjust.

1. Set the stitch selector dial with maximum zigzag width, and remove the front

cover.

2. Loosen the two set screws (A).

3. Adjust the needle swing by turning the hand wheel while holding the worm gear (B) so

there is no rotation until the needle swing starts at 2 to 3 mm above the needle plate

after the needle has come out of the right side of the needle plate hole.

4. Tighten two set screws (A).

5. Mount the front cover.

Note! After adjusting the needle swing, check that the upper shaft worm, and gear rotate

smoothly without any backlash between them.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Viking Nähmaschine Handbücher

Viking

Viking Huskystar C10 Bedienungsanleitung

Viking

Viking Huskylock S15 Bedienungsanleitung

Viking

Viking Designer EPIC Bedienungsanleitung

Viking

Viking Turissa Service-Handbuch

Viking

Viking 3260 Bedienungsanleitung

Viking

Viking Designer Ruby Bedienungsanleitung

Viking

Viking 2780 Bedienungsanleitung

Viking

Viking Turissa Gebrauchsanweisung

Viking

Viking Designer I Bedienungsanleitung

Viking

Viking Interlude 445 Bedienungsanleitung

Viking

Viking Huskystar 215 Bedienungsanleitung

Viking

Viking Scandinavia 300 Bedienungsanleitung

Viking

Viking Emerald 203 Bedienungsanleitung

Viking

Viking ER10 Bedienungsanleitung

Viking

Viking H|Class 500E Bedienungsanleitung

Viking

Viking Designer Topaz Bedienungsanleitung

Beliebte Nähmaschine Handbücher anderer Marken

Riccar

Riccar RL634DE Bedienungsanleitung

Pfaff

Pfaff 3307-1 SERIES Bedienungsanleitung

Siruba

Siruba C007JP Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer SE Bedienungsanleitung

Singer

Singer 148-5 Bedienungsanleitung

IKEA

IKEA SY Bedienungsanleitung

Pfaff

Pfaff 571 Bedienungsanleitung

Singer

Singer 15-91 Bedienungsanleitung

Brother

Brother BB370 Bedienungsanleitung

Pegasus

Pegasus WT100 Series Bedienungsanleitung

Reliable

Reliable 7100DB Bedienungsanleitung

Pfaff

Pfaff 937 Bedienungsanleitung

Singer

Singer 6038 Bedienungsanleitung

Singer

Singer 413K Bedienungsanleitung

Pfaff

Pfaff 1471 E1 Bedienungsanleitung

Kenmore

Kenmore 16677 - Serger Sewing Machine Bedienungsanleitung

HIGHLEAD

HIGHLEAD GC2008-M Bedienungsanleitung

Singer

Singer 400W4 Bedienungsanleitung