Viking H|Class 500E Bedienungsanleitung

USER’S GUIDE

500E_cover.indd 1 2009-11-24 11:01:44

“IMPORTANT SAFETY INSTRUCTIONS”

“When using an electrical appliance, basic safety precautions should always be followed, including the following.”

“Read all instructions before using this sewing machine.”

“DANGER - To reduce the risk of electric shock:”

“This sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the

electric outlet immediately after using and before cleaning.”

“WARNING - To reduce the risk of burns, Àre, electric

shock, or injury to persons: ”

1. “Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children.”

2. “Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by

the manufacturer as contained in this manual.”

3. “Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been

dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or service

center for examination, repair, electrical or mechanical adjustment.”

4. “Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine

and foot control free from the accumulation of lint, dust, and loose cloth.”

5. “Never drop or insert any object into any opening.”

6. “Do not use outdoors.”

7. “Do not operate where aerosol (spray) products are being used or where oxygen is being administered.”

8. “To disconnect, turn switch to the off (“0”) position, then remove plug from outlet.”

9. “Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.”

10. “Keep Àngers away from all moving parts. Special care is required around the sewing machine needle.”

11. “Never sew with a damaged needle plate as this can cause a needle to break.”

12. “Do not use bent needles.”

13. “Do not pull or push fabric while stitching. It may deÁect the needle causing it to break.”

14. “Switch the sewing machine off (“0”) when making any adjustments in the needle area, such as threading needle,

changing needle, threading bobbin, or changing presser foot, etc.”

15. “Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making any other

user servicing adjustments mentioned in the instruction manual.”

16. “If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualiÀed

person in order to avoid a hazard”

17. “Don’t tie up in a bundle while in use. Remove the power cord from the sewing machine after usage and clean it with

dry cloth and keep it a dry place with the sewing machine.”

“CAUTION”

Moving parts-To reduce risk of injury, switch off before servicing. Close cover before operating machine.”

“SAVE THESE INSTRUCTIONS”

“This product is for household use, or equivalent.”

This appliance complies with EEC Directive 2004/108/EC covering the electromagnetic compatibility.

FOOT CONTROL (USA & Canada only)

Use Model YC-485 EC or Model JF-1000 with this sewing machine.

POLARIZED PLUGS CAUTION (USA & Canada only)

This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is

intended to Àt in a polarized outlet only one way. If the plug does not Àt fully in the outlet, reverse the plug. If it still does

not Àt, contact a qualiÀed electrician to install the proper outlet. Do not modify the plug in any way.

500E_cover.indd 2 2009-11-24 11:01:49

CONTENTS

GET TO KNOW YOUR MACHINE

Machine overview.........................................................................................2

Accessories .......................................................................................................3

Stitch overview ...............................................................................................4

SET UP YOUR MACHINE

Unpack the machine....................................................................................8

Connect the power cord and foot control....................................8

Pack away after sewing .............................................................................9

Using the free arm........................................................................................9

Lower/raise the feed teeth.......................................................................9

Presser foot lifter ...........................................................................................9

Spool pins........................................................................................................10

Horizontal spool pin.................................................................................10

Vertical spool pin........................................................................................10

Thread the top thread.............................................................................11

Needle threader..........................................................................................12

Threading for twin needle.....................................................................13

Bobbin winding ............................................................................................14

Insert the bobbin........................................................................................15

Pull up the bobbin thread......................................................................16

Adjust top thread tension......................................................................17

Bobbin tension .....................................................................17

Change presser foot.................................................................................17

Changing the needle.................................................................................18

Needles............................................................................................................18

MACHINE FUNCTIONS

Function buttons.........................................................................................19

Needle Stop Up/Down ......................................................19

Reverse...................................................................................19

Start/Stop..............................................................................19

LED indicator.......................................................................19

Control panel functions .........................................................................20

Direct Selection buttons ....................................................20

Numerical Selection buttons .............................................20

Stitch length and width/needle position controls...........21

Twin needle safety................................................................21

Stitch reference guide..............................................................................21

SEWING

Utility Sewing .........................................................................................22-36

Decorative Sewing..............................................................................37-39

EMBROIDERY

Thread and stabilizer ................................................................................40

Attach the embroidery foot.................................................................41

Thread your machine...............................................................................41

Remove the accessory box..................................................................42

Feed teeth lever..........................................................................................42

Attach the embroidery unit .................................................................42

Remove the embroidery unit..............................................................43

Hoop the fabric...........................................................................................43

Attach and remove the embroidery hoop..................................44

Start embroidering ....................................................................................45

Installation of software.............................................................................45

Function buttons when embroidering............................................47

Start/Stop..............................................................................47

Needle Stop Up/Down .....................................................47

Reverse...................................................................................47

LED indicator.......................................................................47

Thread tension dial .............................................................47

Helpful information when embroidering......................................48

CARE OF YOUR MACHINE

Cleaning and oiling hook area and feed teeth...........................51

Oiling behind the sewing head cover ............................................52

Trouble Shooting ........................................................................................53

Display messages..................................................................53

Sewing....................................................................................55

Embroidery ...........................................................................56

eng manual rev1.indd 1 2009-11-24 11:12:23

~ 2 ~

1. Thread guide

2. Thread take-up lever

3. Thread tension dial

4. Sewing head cover

5. Thread cutter

6. Accessory box (Extension table)

7. Feed teeth lever

8. Bobbin winder

9. Bobbin winding stop

10. Needle stop up/down

11. Reverse Stitch button

12. Start/Stop button (only when

embroidering)

13. Control Panel

14. Stitch reference guide

15. Horizontal spool pin

16. Handle

17. Hand wheel

18. Thread guide

19. Vertical spool pin

20. Power/light switch

21. Cord socket

22. IdentiÀcation plate

23. Presser foot lifter

24. Buttonhole lever

25. Needle threader

26. Thread guide

27. Presser foot screw

28. Needle

29. Bobbin cover plate

30. Needle bar

31. Thread cutter

32. Needle clamp screw

33. Presser foot release button

34. Presser foot

35. Feed teeth

36. Stitch plate

37. Bobbin cover release button

38. Power cord

39. Foot control

40. USB cable

Note: Be sure to use the USB cable included with

your machine when doing embroidery.

MACHINE OVERVIEW

1Get to Know Your Machine

eng manual rev1.indd 2 2009-11-24 11:12:24

~ 3 ~1. Get to Know Your Machine

ACCESSORIES

User’s Guide (not pictured)

For Sewing Machine

1. Needles

2. Bobbins

3. Spool pin cap (small)

4. Spool pin cap (large)

5. Seam ripper (Buttonhole opener)/

Brush

6. Screwdriver for needle plate (large)

7. Screwdriver (large)

8. Screwdriver (small)

9. Zipper foot

10. Button sewing foot

11. Blind stitch foot

12. Buttonhole foot

13. Satin Stitch foot

14. Thread spool net (long)

15. Thread spool net (short)

16. Removable thread guide

For Embroidery

17. Vinyl bag

18. Bobbins

19. Scissors

20. Embroidery presser foot

Embroidery software CD (not pictured)

Note: embroidery system

is a software providing powerful options and

capabilities for embroidery. In order to install the

software, see page 45 or consult the software CD

for further information.

The Foot attached to your Sewing machine

upon delivery is called the Utility Foot. It

will be used for most sewing.

The Satin Stitch Foot (13) is another very

useful foot and should be used for most

decorative sewing.

When purchasing additional bobbins, make

sure they are Class I5 J. INSPIRA™,

#141001012 (4-pack)/#141001013

(12 pack).

Embroidery Unit

41. Embroidery hoop

attachment screws

42. Embroidery arm

43. Handle

44. Hoop bracket

45. Release lever

46. Connector

Hoops

One small and one large hoop

is included with the machine.

47. Embroidery hoop

connector

48. Hoop adjustment screw

49. Outer hoop

50. Inner hoop

414243

1234

567 8

9 10 11 12

14 15 16

17 18 19 20

eng manual rev1.indd 3 2009-11-24 11:12:24

~ 4 ~

STITCH OVERVIEW

Toward rightToward left

¿Adjusting needle position for straight stitch 13 needle positions are available for quilting, top stitching etc.

Width control

Toward rightToward left

STITCH No. LENGTH (mm) NEEDLE POSITION TWIN

NEEDLE

Auto Manual Auto Manual

00 2.5 0.5 - 4.75 CENTER LEFT - RIGHT¿|

01 2.5 1.5 - 3.0 CENTER LEFT - RIGHT¿|

02 2.5 2.0 - 4.0 CENTER -|

STITCH No. LENGTH (mm) WIDTH (mm) TWIN

NEEDLE

STITCH No. LENGTH (mm) WIDTH (mm) TWIN

NEEDLE

Auto Manual Auto Manual Auto Manual Auto Manual

03 2.0 0- 3.0 5.0 0 - 6.0 |07 3.0

5.0 5.0, 6.0 ±

04 2.0 1.0- 3.0 3.0 2.0 - 7.0 |08 2.5 1.5- 3.0 5.5 3.5 - 7.0 |

05 1.5 0- 2.5 6.0 2.5 - 6.0 |09 0.5 0.25 - 1.5 7.0 3.5 - 7.0 |

06 2.0 1.0- 3.0 3.0 1.0 - 6.0 |10 0

3.0 2.0 - 4.5 ±

On the following pages you will Ànd information on the stitches included in your machine. Next to each stitch you can

Ànd information about the stitch number and pre-set values (auto) for stitch width and length. Also provided are the levels

between which you can manually adjust the length and width of a stitch. Whether or not a twin needle can be used is

indicated in the table as well (|= Yes, ±= No).

For details on how to adjust the stitch length and stitch width, see page 21.

eng manual rev1.indd 4 2009-11-24 11:12:26

~ 5 ~1. Get to Know Your Machine

STITCH No. LENGTH (mm) WIDTH (mm) TWIN

NEEDLE

STITCH No. LENGTH (mm) WIDTH (mm) TWIN

NEEDLE

Auto Manual Auto Manual Auto Manual Auto Manual

11 2.0 1.0 - 3.0 6.0 3.0 - 6.0 |26 2.0 0.75 - 3.0 5.0 1.0 - 7.0 |

12 2.5 1.5 - 3.0 5.0 2.0 - 6.0 |27 2.5 1.25 - 3.0 7.0 3.5 - 7.0 |

13 2.5 1.5 - 3.0 5.0 1.0 - 7.0 |28 2.5 1.5 - 2.5 6.5 3.5 - 7.0 |

14 2.5 1.5 - 3.0 7.0 1.0 - 7.0 |29 2.5 1.5 - 2.5 5.5 3.0 - 7.0 |

15 2.0 1.5 - 2.5 7.0 3.5, 7.0 |30 2.5 1.5 - 3.0 5.0 1.0 - 7.0 |

16 1.75 0.75 - 2.5 7.0 3.5, 7.0 |31 2.5 1.5 - 3.0 7.0 1.0 - 7.0 |

17 2.0 1.5 - 3.0 6.0 3.0 - 6.0 |32 2.0

6.0 3.5, 6.0 |

18 2.5 1.5 - 3.0 5.0 2.0 - 7.0 |33 2.0

6.0 3.5, 6.0 |

19 2.5 1.5 - 3.0 5.0 1.0 - 7.0 |34 0.5 0.25 - 1.25 6.0 3.0 - 6.0 |

20 2.5 1.5 - 3.0 5.5 3.5 - 7.0 |35 0.5 0.25 - 2.5 7.0 3.5 - 7.0 |

21 2.0 1.5 - 3.0 6.0 3.0 - 6.0 |36 0.5 0.25 - 1.5 7.0 3.0 - 7.0 |

22 2.5 1.0 - 3.0 6.0 2.0 - 6.0 |37 0.5 0.25 - 1.5 7.0 3.0 - 7.0 |

23 0.5 0.25 - 1.5 7.0 3.5 - 7.0 |38 0.5 0.25 - 1.5 7.0 3.5 - 7.0 |

24 0.5 0.25 - 1.5 7.0 3.5 - 7.0 |39 2.5 0.75 - 2.5 5.0 1.0 - 7.0 |

25 2.0 1.0 - 3.0 5.0 1.0 - 7.0 |40 0.5 0.25 - 1.5 7.0 3.5 - 7.0 |

eng manual rev1.indd 5 2009-11-24 11:12:27

~ 6 ~

STITCH No. LENGTH (mm) WIDTH (mm) TWIN

NEEDLE

STITCH No. LENGTH (mm) WIDTH (mm) TWIN

NEEDLE

Auto Manual Auto Manual Auto Manual Auto Manual

41 2.0 1.0 - 3.0 3.0 1.0 - 6.0 |56 1.25 0.75 - 4.0 7.0 3.5 - 7.0 |

42 2.5 1.5 - 3.0 3.0

|57 0.75 0.5 - 1.5 7.0 3.5 - 7.0 |

43 2.5

7.0

±58 0.75 0.5 - 1.5 7.0 3.5 - 7.0 |

44 2.0

7.0

±59 0.5 0.5 - 1.0 5.0 2.0 - 6.0 |

45 2.5 1.5 - 2.5 7.0 3.5 - 7.0 |60 0.5 0.5, 0.75 5.0 2.0 - 7.0 |

46 2.5 1.5 - 2.5 7.0 3.5 - 7.0 |61 1.25 1.0 - 2.0 6.25 3.75 - 6.25 ±

47 2.5 1.5 - 2.5 6.0 3.0 - 6.0 |62 2.5 1.5 - 2.5 7.0 3.5 - 7.0 |

48 0.5 0.25 - 1.5 7.0 3.5 - 7.0 |63 1.75 1.5 - 2.5 7.0 3.0 - 7.0 |

49 0.5 0.25 - 1.5 7.0 3.5 - 7.0 |64 2.5 1.5 - 2.5 7.0 4.0 - 7.0 ±

50 0.5 0.25 - 1.5 7.0 3.5 - 7.0 |65 0.5 0.25 - 1.5 7.0 3.0 - 7.0 |

51 0.5 0.25 - 3.0 7.0 3.0 - 7.0 |66 0.5 0.25 - 1.5 7.0 3.0 - 7.0 |

52 0.5 0.25 - 3.0 7.0 3.0 - 7.0 |67 1.75 1.0 - 4.0 7.0 3.5 - 7.0 |

53 2.5 1.5 - 2.5 7.0 3.5 - 7.0 |68 1.75 1.0 - 4.0 7.0 3.5 - 7.0 |

54 2.5 1.5 - 2.5 7.0 3.5 - 7.0 |69 2.5 1.5 - 2.5 5.0 3.0 - 7.0 |

55 1.25 0.75 - 4.0 7.0 3.5 - 7.0 |70 2.5 1.5 - 2.5 5.0 3.0 - 7.0 |

eng manual rev1.indd 6 2009-11-24 11:12:27

~ 7 ~1. Get to Know Your Machine

STITCH No. LENGTH (mm) WIDTH (mm) TWIN

NEEDLE

STITCH No. LENGTH (mm) WIDTH (mm) TWIN

NEEDLE

Auto Manual Auto Manual Auto Manual Auto Manual

71 2.5 1.0 - 2.5 7.0 3.0 - 7.0 |86 2.5 1.5 - 2.5 6.0 3.5 - 7.0 |

72 2.5 1.0 - 2.5 7.0 3.0 - 7.0 |87 2.5 1.0 - 2.5 6.0 2.0 - 7.0 |

73 2.5 1.5 - 2.5 6.0 3.0 - 6.0 |88 1.5 0.5- 2.0 6.0 2.0 - 7.0 |

74 2.5 1.5 - 2.5 6.0 3.0 - 6.0 |89 1.5

6.0

75 0.5 0.25 - 1.5 7.0 3.0 - 7.0 |90 2.0 2.0 - 4.0 3.5

76 0.5 0.25 - 1.5 7.0 3.5 - 7.0 |91 0.5 0.5, 0.75 6.0

77 2.5 1.5 - 2.5 7.0 3.5 - 7.0 |92

----

78 2.0 0.75 - 3.0 5.0 1.0 - 7.0 |93 0.5 0.5, 0.75 6.0

79 2.0 1.0 - 2.5 6.0 3.0 - 7.0 |94 0.5 0.5, 0.75 3.5

80 2.5 1.5 - 2.5 6.0 3.0 - 6.0 |95 0.5 0.5, 0.75 3.5

81 2.5 1.5 - 2.5 6.0 3.0 - 6.0 |96 0.5 0.5, 0.75 3.5

82 2.5 1.5 - 2.5 7.0 3.0 - 7.0 |97 0.5 0.5, 0.75 3.5

83 1.5 0.5 - 1.5 7.0 3.0 - 7.0 |98 0.5 0.5, 0.75 3.5

84 2.5 1.5 - 2.5 5.0 3.5 - 7.0 |99 0.5 0.5, 0.75 3.5

85 2.5 1.5 - 2.5 7.0 3.5 - 7.0 |

eng manual rev1.indd 7 2009-11-24 11:12:28

~ 8 ~

UNPACK THE MACHINE

Unpack the machine and place it on a Áat table. Check

the balance of the machine. If the machine does not

stand sturdy on the table, adjust the level of the machine

following these steps:.

Lay machine on its back gently and carefully with both

hands. Be careful not to make scratches on machine and/

or table. Be careful not to drop the machine or to have

your Àngers caught between the machine and table.

Insert the small screwdriver into the hole (1) and adjust the

level of the machine by turning it. After the adjustment,

check that the machine stands sturdy on the table.

Note: Be sure to wipe off any surplus oil from needle plate area

before using your machine the Àrst time.

CONNECT THE POWER CORD

AND FOOT CONTROL

Among the accessories you will Ànd the power cord and

the foot control.

Note: Before plugging in the foot control, check to ensure that it

is type “YC-485 EC or Model JF-1000” (see underside of foot

control).

1. Connect the foot control cord to the rear socket on

the bottom right side of the machine (1).

2. Connect the power cord to the front socket on the

bottom right side of the machine (2) and your wall

outlet (3) as illustrated.

3. Press the ON/OFF switch to ON (|) to turn on

power and light (4).

2Set Up Your Machine

eng manual rev1.indd 8 2009-11-24 11:12:29

Inhaltsverzeichnis

Andere Viking Nähmaschine Handbücher

Viking

Viking Turissa Gebrauchsanweisung

Viking

Viking 2780 Bedienungsanleitung

Viking

Viking Huskylock S15 Bedienungsanleitung

Viking

Viking Designer Topaz Bedienungsanleitung

Viking

Viking Turissa Service-Handbuch

Viking

Viking ER10 Bedienungsanleitung

Viking

Viking Designer Ruby Bedienungsanleitung

Viking

Viking 3260 Bedienungsanleitung

Viking

Viking Emerald 203 Bedienungsanleitung

Viking

Viking Designer I Bedienungsanleitung

Viking

Viking Huskystar C10 Bedienungsanleitung

Viking

Viking Huskystar 215 Bedienungsanleitung

Viking

Viking Scandinavia 300 Bedienungsanleitung

Viking

Viking Huskystar 207 Bedienungsanleitung

Viking

Viking Designer EPIC Bedienungsanleitung

Viking

Viking Interlude 445 Bedienungsanleitung

Beliebte Nähmaschine Handbücher anderer Marken

Riccar

Riccar RL634DE Bedienungsanleitung

Pfaff

Pfaff 3307-1 SERIES Bedienungsanleitung

Siruba

Siruba C007JP Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer SE Bedienungsanleitung

Singer

Singer 148-5 Bedienungsanleitung

IKEA

IKEA SY Bedienungsanleitung

Pfaff

Pfaff 571 Bedienungsanleitung

Singer

Singer 15-91 Bedienungsanleitung

Brother

Brother BB370 Bedienungsanleitung

Pegasus

Pegasus WT100 Series Bedienungsanleitung

Reliable

Reliable 7100DB Bedienungsanleitung

Pfaff

Pfaff 937 Bedienungsanleitung

Singer

Singer 6038 Bedienungsanleitung

Singer

Singer 413K Bedienungsanleitung

Pfaff

Pfaff 1471 E1 Bedienungsanleitung

Kenmore

Kenmore 16677 - Serger Sewing Machine Bedienungsanleitung

HIGHLEAD

HIGHLEAD GC2008-M Bedienungsanleitung

Singer

Singer 400W4 Bedienungsanleitung