Viotek GFV22CB Bedienungsanleitung

GFV22CB

21.5" GAMING MONITOR

USER MANUAL

In order to continue serving our customers and providing the best products, our product information

including our user manuals may receive updates from time to time. Please check our website for the

latest user manuals and product materials.

Table of Contents

Section 1: Safety Precautions............................................ 4

Section 2: Box Contents..................................................... 5

Section 3: Product Overview.............................................. 6

3.1 – Monitor Buttons....................................................... 6

3.2 – Monitor Ports .......................................................... 6

Section 4: Stand Installation .............................................. 7

Section 5: Wall Mounting.................................................... 8

Section 6: Basic Operation................................................. 9

Section 7: Indicator Light.................................................... 10

Section 8: OSD Setup.......................................................... 10

8.1 – OSD Menu Functions.............................................. 12

Section 9: ECO Modes and Gameplus............................... 13

Section 10: Troubleshooting............................................... 14

Section 11: Speciﬁcations .................................................. 16

Section 12: One-Year Limited Hardware Warranty ........... 17

Section 1: Safety Precautions

Read and observe the following warnings and information below.

1. Before cleaning, always unplug your monitor. It is recommended that you use

dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however,

the safest. If using damp cloth, wait for your monitor to completely dry before

plugging it in again.

2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your

monitor.

3. This monitor features ventilation openings on the back of the unit. Avoid blocking

these openings to prevent the monitor from overheating.

4. Avoid placing this monitor near any heat sources, e.g., portable heaters or

heating vents, as this may cause damage to your monitor.

5. Do not spray cleaner and or any kind of liquid directly onto the monitor’s screen

or any part of the monitor.

6. Do not insert anything into any part of the monitor especially the ventilation

openings.

7. Always make sure your monitor is placed on a secure, level surface to prevent it

from falling and sustaining damage.

8. Unplug your monitor during any extended periods of non-use.

9. Do not place heavy items on the monitor or monitor cables.

10. Do not attempt to disassemble or remove parts from the monitor. Any

disassembly or modication not performed by an authorized technician can

result in damage to the monitor and/or possible exposure to high voltage

electricity which may lead to serious injury or death.

VIOTEK®shall not be held responsible for injury or damage of products or persons

due to failure to adhere to the aforementioned precautions or any others noted

hereafter.

Section 2: Box Contents

Monitor x 1 Stand Stem x 1 Stand Base x 1

DP 1.2 Cable x 1 User Manual x 1

Power Cable x 1Decorative Cover x 1

NO. 1 Screws x 5

(for Stand Installation)

Screw driver

NO. 2 Screws x 2

(for Stand Installation)

Extra screws may be included as backup.

NO. 3 Screws x 4

(for Wall Mounting)

17mm

Section 3: Product Overview

3.1 – Monitor Buttons

7 DC IN Power Connector: Insert the power cable to supply power to the monitor.

8 DisplayPort (DP) 1.2 Connector: Insert one end of the DP cable into the

computer’s DP output and connect the other end to the monitor’s DP port.

9 HDMI 1.4 Connectors: Insert one end of the HDMI cable into the

computer’s HDMI output and connect the other end to the monitor’s HDMI port.

10 Audio Output: Insert one end of the audio cable into an external audio

source, e.g., speakers or headphones, to pass audio signals through the

monitor.

97 108

2 3 4 5 61

1 M Menu Button: Press to display the OSD menu or enter sub-menus.

2 Down Button: Press to move down in the menus.

3 Up Button: Press to move up in the menus.

4 E Exit Button:Press to exit.

5 Power Button: Press to turn the monitor on/off.

6 LED Indicator: Changes colors to indicate status. Refer to Section 8.

3.2 – Monitor Ports

HDMI 1HDMI 2

Section 4: Stand Installation

1. Open the package and take out the product with foam still attached. Gently place

it on a desktop or table.

2. Take out the stand and base. Connect the stand into the base hole and use the

included screwdriver and four NO.1 screws to fasten base to the stand.

Base Stand

Hole

NO. 1 Screws x 4

3. Attach the stand to monitor via the opening on the back and use one NO.2 screw

to x the stand onto the monitor. Make sure the stand is securely attached to the

back of the monitor. Remove face-down the monitor from the remaining foam

section and stand it up on the desired surface.

NO. 2 Screw x 1

Decorative Cover

If needed, the stand can easily be detached from the monitor by loosen the NO.

2 screw on the top of stand. Gently place monitor face-down on a at surface,

then unscrew the stand to remove it.

Section 5: Wall Mounting

VESA and/or mounting accessories not included.

1. Open the package and take out the monitor with the foam still attached. Gently

place it on a desktop or table. If the monitor is attached to the stand, remove the

stand by removing the screw on the back of the monitor just above the stand.

2. Attach the four NO. 3 screws into the mounting holes at the back of the monitor.

NO. 3 Screws x 4

3. Follow the directions that came with your mounting kit (not included) to mount

the monitor on the wall or monitor stand.

Wall

Mounting Base

(Not included)

Section 6: Basic Operation

1. Insert one end of the DP cable into your PC’s graphics card. An HDMI cable may

also be used. HDMI cable not included.

For optimal refresh rate (or “performance”), it is recommended to use an DP

cable with the monitor’s corresponding connector.

2. Connect the other end of the cable to the corresponding connector on your

monitor. See the image below.

HDMI 1HDMI 2DP 1.2

3. Connect the power cable to your monitor then connect the other end to your

power source. It is recommended that you use a surge protector with adequate

voltage if a wall outlet cannot be reached directly.

4. Locate the power button on the monitor and press it to turn the monitor on.

Overclocking — DisplayPort (DP) Only

Depending on your graphics card, it may be possible to overclock the monitor’s

refresh rate up to 144Hz. Doing so may limit max. resolution as determined by your

graphics card.

Overclocking can result in image distortion based on the conguration of the

connected device. It may be possible to reduce distortion by lowering monitor

resolution.

Overclocking has the potential to damage the monitor. Damage caused by

overclocking is not covered by the warranty.

AMD FreeSync

This feature is off by default. To activate, you must have hardware with FreeSync

capability, a DP or HDMI cable, and the latest graphic drivers. After connecting your

computer and monitor with a DP or HDMI cable, you may receive a prompt to enable

the feature on your computer. If you do not, you may need to enable the function in

your graphics card menu. See your graphics card manufacturer’s documentation for

instructions.

Section 7: Indicator Light

Solid blue light indicates power is on and the monitor is operating normally. Flashing

blue light indicates no video source, no horizontal or vertical signal has been

detected or voltage is low. Please ensure your computer is on and all video cables

are fully inserted and/or connected.

LED Indicator

Section 8: OSD Setup

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings

and appears on screen after turning on the monitor and pressing the Mbutton.

When using the monitor for the rst time, settings will automatically adjust to

optimal settings according to your computer’s conguration.

1. Press any one of the buttons (M, , , E, ) to activate the navigation window.

eco

Inhaltsverzeichnis

Andere Viotek Monitor Handbücher

Viotek

Viotek GN32DB Bedienungsanleitung

Viotek

Viotek GN27C2 Bedienungsanleitung

Viotek

Viotek NB32CW Bedienungsanleitung

Viotek

Viotek GFT27CXB2 Bedienungsanleitung

Viotek

Viotek GNV32DB Bedienungsanleitung

Viotek

Viotek NB24CW Bedienungsanleitung

Viotek

Viotek GN35DA Bedienungsanleitung

Viotek

Viotek FI24D Bedienungsanleitung

Viotek

Viotek LinQ Bedienungsanleitung

Viotek

Viotek LinQ Touch Bedienungsanleitung

Viotek

Viotek GFT27DB Bedienungsanleitung

Viotek

Viotek GN24CW Bedienungsanleitung

Viotek

Viotek GNV27CB Bedienungsanleitung

Viotek

Viotek RFI25CBA Bedienungsanleitung

Viotek

Viotek GFV24CB Bedienungsanleitung

Viotek

Viotek H270 Bedienungsanleitung

Viotek

Viotek GNV34DBE2 Bedienungsanleitung

Viotek

Viotek GNV34DB Bedienungsanleitung

Viotek

Viotek GN27CB Bedienungsanleitung

Viotek

Viotek GFV24C Bedienungsanleitung

Viotek

Viotek NFI24DBA Bedienungsanleitung

Viotek

Viotek GN35LD Bedienungsanleitung

Viotek

Viotek NB27C Bedienungsanleitung

Viotek

Viotek GNV34CB Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung