Vipro MVR-200 Bedienungsanleitung
ViPRO Corporation
User’s Manual
MVR-200-GUI l v1.1 l 2014.07
MVR-200 4ch Mobile DVR
User’s Manual
This manual was complete and correct at the time of printing. The ongoing development of the products may
mean that the content of the user guide can change without notice.
The manual will be kept updating periodically, and software referred as well.
© 2014 ViPRO Corporation
ViPRO Corporation
User’s Manual
MVR-200-GUI l v1.1 l 2014.07
Mobile DVR MVR-200
NOTICE
2
NOTICE
The information in this manual was current when published. The contents of this manual are subject to change without prior
notice and will be updated accompanying with the release of new version.
The purpose of this manual is to kindly aid the user for the operation for our MDVR (especially for GUI setting). The user
should have a basic understanding of computer operation and basic knowledge of how to connect peripherals and make
some settings.
Guarantee & Warnings
1) Electrical Apparatus Safety
All installation and operation should comply with local electrical safety norms.
2) Transportation
In the process of transportation, storage and installation, please avoid heavy stress, violent vibration, impact and
water splashing.
3) Installation
Install the equipment in accordance with the requirements, handle carefully. Do not heavily press the equipment
before the MDVR installation is finished.
4) Requirements on Engineers & Technicians
All the work of checking and maintenanceshould be done byqualified engineers. We do not undertake any problems
caused by unauthorized modifications.
5) Requirements on Environment
The equipment should be installed and stored in a cool and dry place, away from direct sunlight, flammable or
explosive substances, etc. Keep gaps not less than 3cm around the device to facilitate ventilation for cooling.
6) Accessories
Make sure to use accessories from the manufacturer suggested in the attachment.
Insulate circuit ground and metal shell for all the peripherals.
Before installation, please open the package and ensure that all parts are included.
MVR-200 supports dual SD card recording, but you must ensure the consistency of the two SD card (same capacity,
brand and production batch).
If there are any problems, please contact us as soon as possible.
ViPRO Corporation
User’s Manual
MVR-200-GUI l v1.1 l 2014.07
Mobile DVR MVR-200
PRODUCT OVERVIEW
3
Product Overview
MVR-200 is a cost-effective Mobile Digital Video Recorder specially designed for mobile surveillance. It adopts
high-speed processor and embedded operating system, combined with H.264 video compression &
decompression technology and GPS locating technology. It can realize CIF, HD1 and D1 video recording and
vehicle driving information recording, with the data recorded down to be used for data query and accident
analysis. MVR-200 is designed exquisitely with advantages of flexible installation, easy maintenance, etc.
Features
1) Total resources: 4 CH D1 100/120fps
2) Dual cards recording: support cycle recording (two SD cards record one by one circularly) and mirror
recording (one is for main recording and another is for backup) with dual 32GB/64GB/128GB SD cards,
up to total 256GB storage capacity.
3) Waterproof level up to IP54: protect device from the damage of dust and water spray from different
direction.
4) Support GPS for location tracking
5) Support 360 degree installation;
6) Support CIF, HD1 and D1 resolution;
7) Provide protection for abnormal power-off, which reduces video loss;
8) Support DC8~36V wide voltage input, suitable for 12V and 24V vehicle;
9) Watermark technology: prevent data tempering and guarantee the video authenticity and legal efficiency;
Functions
1) Local recording and video playback: D1/HD1/CIF resolution optional;
2) Driving recording: provide statistics on speed, turning, brake, reverse, opening door, etc.
3) User log: on-off status of the device, video loss, recording start time / end time, user log in / log out,
modification of the device parameters, checking the time, GPS status.
4) Import and export of the configuration file: U disk import/export device parameters.
5) Device upgrade: support local upgrade.
6) Alarm linkage: support linkage switch value output, image display, etc.
7) Storage formatting: formatting SD cards and external USB devices.
ViPRO Corporation
User’s Manual
MVR-200-GUI l v1.1 l 2014.07
Mobile DVR MVR-200
SPECIFICATIONS
4
Specifications
Product series
MVR-200
Function Overview
Preview, Recording, Playback, Locating
System
OS
Linux 2.6.24
Control Mode
IR remote control
Video
Input
4 channels
Output
1 channel
Total Resource
4CH D1 100/120fps
Video Signal Standard
Electrical level: 1Vpp; Impedance: 75Ω NTSC/PAL Optional
Audio
Input
4 channels
Output
1 channel
Audio Signal Standard
Electrical level: 2Vpp; Input impedance: 9.4Ω
Display
Split mode
1/4 channels
OSD
GPS information, alarm, temperature, voltage, device information,
firmware version, MCU version
Operation Interface
Semi-transparent GUI
Recording
Video/Audio Compression
H.264/ADPCM
Image Resolution
PAL: D1 (704x576), HD1 (704x288), CIF (352x288)
NTSC: D1 (704x480), HD1 (704x240), CIF (352x240)
Image Quality
1-8 levels adjustable (1 is the best)
Recording Mode
Manual/schedule/Alarm (sensor trigger, speed, acceleration, video
loss, temperature)
Post-recording
0 ~ 30 minutes
Playback
Playback Channel
1 channel by local playback, 1/4 channel by software playback
Search Mode
Date/time, channel, event
Locating
GPS
Location tracking, speed detection and time synchronization
Storage
SD Card
32GB/64GB/128GB Class 10 SDXC card (optional)
Interface
USB
USB2.0 x 1
SD
SD x 2
Sensor / Alarm
4 inputs, 2 outputs
Speed
1 channel pulse speed detection
Power
Input
DC 8 ~ 36V
Output
12V @500mA
Current
Impulse current: input 13.5V@1.3A
Working current: input 13.5V@1.2A, 27V@0.5A
Standby current: 0A
Physical
Characteristic
Dimension (L x W x H)
142 x 144.8 x 54.2mm
Weight
0.7Kg
Operating
Environment
Temperature
-25℃- +60℃
Relative Humidity
8%-90%
Certificates
CE, FCC, MIL-STD-810F
ViPRO Corporation
User’s Manual
MVR-200-GUI l v1.1 l 2014.07
Mobile DVR MVR-200
SYSTEM DIAGRAM
5
System Diagram
ViPRO Corporation
User’s Manual
MVR-200-GUI l v1.1 l 2014.07
Mobile DVR MVR-200
EXTERNAL INTERFACE
6
External Interface
ViPRO Corporation
User’s Manual
MVR-200-GUI l v1.1 l 2014.07
Mobile DVR MVR-200
FRONT PANEL
7
Front panel
Serial No.
Print
Description
1
IR
Remote control receiving
2
LED
LED status indicator
3
USB
USB interface
4
SD
SD card interface
ViPRO Corporation
User’s Manual
MVR-200-GUI l v1.1 l 2014.07
Mobile DVR MVR-200
REAR PANEL
8
Rear Panel
Serial No.
Print
Description
1
DC8-36V
DC IN Jack
2
AV IN1
Audio & Video Input 1
3
AV IN3
Audio & Video Input 3
4
A/V OUT
For Monitor
5
For GPS Antenna
6
SENSOR
Alarm I/O
7
AV IN4
Audio & Video Input 4
8
AV IN2
Audio & Video Input 2
ViPRO Corporation
User’s Manual
MVR-200-GUI l v1.1 l 2014.07
Mobile DVR MVR-200
OPERATION
9
Operation Instructions
User Login
1) Login: when the device is started, press the button Startup/Shutdown or Settings on the control panel,
then you enter the following Login page.
2) Input the device No.: Enter the number in the bracket.
3) Input password: Enter the user password or admin password. You can only search video and review
information menu; if you enter with the admin password, you can set the device parameters as well.
Tips: User default password is 22222222, and Admin password is 88888888.
Local Rec. Search, Playback and Backup
1) Rec. Search: can search records according to file types, recording channels, date, start/end time;
includes two types of file (green block means normal video, red block means records of that day contains
alarm video.)
The search result is displayed as follows.
ViPRO Corporation
User’s Manual
MVR-200-GUI l v1.1 l 2014.07
Mobile DVR MVR-200
FORMAT
10
2) Rec. Backup: select the channel and time of the file for playback, press the key “Enter” to start playback.
3) Rec. Data Export: if there is record file in the channel you choose, press the button “Export” to export all
the files in the effective period to the storage device which is connected to the USB interface.
Format
Click “System” in the main menu, choose “Format”. You can separately format the internal SD card and the
external U disk.
Note: both new hard disk and SD card should be formatted when it is used for the first time.
Inhaltsverzeichnis
Andere Vipro DVR Handbücher
