Vitek VT-DVR04 Bedienungsanleitung

DVR04

4 CHANNEL DIGITAL

VIDEO RECORDER

User’s Manual

Version 2.1

TABLE OF CONTENTS

Forward

Safety and Precautions

Getting Started

Front Panel

Power

Audio Selector

Video Selector

Playing Back Recorded Images

System Status LED

Remote Control Sensor

USB Port

Rear Panel

AC Power Socket (100V-260V)

Video Output Terminal (BNC Connector)

Audio In Terminal

Video Export (RCA Connector)

Network Terminal (RJ 45)

External Remote Control Sensor Terminal

External Alarm Out

External Sensor In

RS 485 Terminal (P/T/Z/F)

Remote Control

Using the Remote Control

Remote Control Functions

Power On/Off

Event Log Display

OSD (On Screen Display) On/Off

M/D (motion detection) Area Display On/Off

Network Status

Sensor Off

Alarm On /Off

Video Screen Selector

Audio Selector

Playback Controls

Directional and Enter Keys

Exit/Live

P/T and Z/F

VISS Find/Set

R/C (remote control) SET

Help

Menu – System Configuration

Recording Schedule

Compress Ratio

Alarm Link

Password Change

Disk Info

Recording Speed

Spot Monitor

Motion Detection

P/T/Z/F Setup

Misc. Menu

12-13

Trouble Shooting

FORWARD

Thank you for purchasing your VT-DVR04, a state of the art Digital Video Recorder

(DVR) utilizing the latest available video processing technology.

This version of the User’s Manual was written in March 2003. The contents of this

manual, the DVR’s capability, and other information may be changed or revised

without prior notice.

Please read the User’s Manual in its entirety before installing and operating the DVR.

Please keep this guide in a safe place for future reference.

We, at Vitek, have developed a Digital Surveillance System Chip, a central processing

unit, that achieves real-time outputs to each of 4-channels of video. We have increased

the compression rate by employing MPEG-2 technology that enhances the core function

of image preservation--the essence of a security system. For your convenience, we have

included a patented front panel and a remote control with the system. This unique

feature allows the user to use this technologically complex system without prior

knowledge of operating a computer system. VT-DVR04 is a state of the art DVR security

system that can be monitored from anywhere in the world through a Network Interface

Card (NIC) and a DSL or secured line.

Safety and Precautions

1. Only use the power source provided with the product.

2. Do not block the vent as the system may over heat, malfunction, or catch fire.

3. Keep away from direct sunlight and place the product where there is adequate

ventilation.

4. Keep this product away from moisture and do not touch the product with wet

hands.

5. Do not place any items on top of the VT-DVR04.

6. Do not drop or mishandle during transport.

7. Only use accessories that have been approved by Vitek. Keep the product level

during operation.

8. All hard disks and backup disks used with the system must be provided by Vitek.

9. In the case of a malfunction, please contact your local dealer or an authorized

service person. Warranty will be null and void if the product is disassembled or

manipulated by the user.

The following items are included with the VT-DVR04. Please be certain that all

items are included upon opening the carton:

1. Components

oVT-DVR04 (main component)

oRemote Control (batteries included)

oPower Cable

oUser’s Manual

oWarranty Card

oSoftware Diskettes (Set of 2)

Rack Mount Bracket

Getting Started

1. Remote control uses two AAA batteries.

2. Battery life depends on usage.

3. Please keep extra batteries handy for future use.

NOTE

Product Information

1. Front Panel

The Audio button is used to select the desired audio channel. By

pressing this button, the user will scroll through CH1, CH2, and MUTE.

Select the desired audio channel for playing back recorded audio.

1. Power

2. Audio Selector

Power On/Off Button. Power Off is indicated by RED and Power On

status is indicated by GREEN. To turn the system on, press the Power

key. The key should turn amber. Enter the password (default is 1111)

using the remote control and press the power key again. The key should

The key should turn green and the system should become active. To turn

the system off, repeat the above step.

The Green light Indicates the selected audio channel. When both

indicators are not illuminated, this signifies MUTE status.

3. Video Selector

The Green LIVE button indicates that the system is in the live viewing

mode. This button is also used to return the system to live viewing

mode from the playback mode.

When in live mode, the user can select a screen to be viewed as a

single, full screen. A channel can be selected by using the directional

key *(the channel number will be illuminated in yellow). Once selected,

the user can view the channel full screen by pressing the ENTER key.

To return to the quad mode, press the ENTER key again.

4 & 5. Playing Back Recorded Images

6. System Status LED

When lit, the light indicates that there is a remote user connected to the

system.

8. Remote Control Sensor

The Playback buttons consist of Frame Advance, Fast Forward, Forward

Play, Stop, Reverse Play, and Fast Reverse.

To get to the playback mode, simply press any one of the playback

buttons. Then press the STOP button. This will take the user to the time

selector mode. Note: The first digit in the time will begin to blink. Select

the desired time by pressing the up or down cursor. Press the right

or left cursor to skip to the next digit, then press the PLAY button.

When lit, the light indicates that system is currently recording.

7. P/T/Z

/F Control

If the system is connected to a P/T/Z camera, the camera can be controlled

from the system. From the live, single screen mode, press the P/T or the

Z/F button. Camera can be controlled with the cursor keys.

9. USB Port

To capture a footage (approximately 2.5 seconds), insert a USB Memory Stick and

press enter. Video may also be recorded to an external VCR by use of the video

export connector located at the rear of the unit.

2. Rear Panel

1. AC Power Socket (100V

260V)

Insert the provided accessory power cord here.

2. Video Input Terminal (BNC Connector)

There are total of four camera inputs.

3. Video Output Terminal

(BNC Connector)

Switch Monitor. Up to Four cameras can be programmed to

switch sequentially.

Main Monitor. Live and Playback is shown with the On Screen Display

(OSD). CANNOT BE USED SIMULTANEOUSLY WITH OPTIONAL

COMPUTER MONITOR CRT OUTPUT.

Multiplex Output. Four screens are shown without

OSD.

Main Monitor-

Secondary Option. User can view the Live and Playback

screens through a computer monitor. CANNOT BE USED

SIMULTANEOUSLY WITH THE MAIN MONITOR.

4. Audio In Termin

System can record up to two audio inputs.

5. Video Export (RCA Connector)

System will export recorded images to a VCR or to TV. This

allows The user to record desired footage in VTR analog format.

6. Audio Output

Will playback a single, selected audio channel.

7. Network Terminal (RJ 45)

Network port for remote access.

8. External Remote Control Sensor Terminal

9. External Alarm Out

12V and 5V output can be selected and can be connected to an external

alarm system. (Normal : Low)

10. External Se

nsor In

Up to four Open/Close Relay type Sensors can be connected to the system.

11. RS 485 Terminal (P/T/Z/F)

For use with IR repeater if unit is located in a remote area (equipment

closet, ETC.).

Direct connection to supported PTZ with RS485 operation. Converter will

be necessary for other data formats (i.e. RS422, ETC.).

Power On/Off

2. Event Log

3. OSD On/Off

4. M/D (motion detection)

Area indicator On/Off

5. Network Status Indicator

6. Sensor Off (S1-S2)

7. Alarm On/Off

8. Video Selector

9. Audio Selector

10. Playback Controls

11. Directional keys and Enter

12. Menu

13. Exit

14. P/T/Z/F

15. VISS Set/Find

16.

Remote Control ID Selector

17. HELP –

software / firmware

version

3. Remote Control

There are two methods of configuring the VT-DVR04: from the site where VT-DVR04 Is

installed and through the Network Connection.

Following are the description for configuring the VT-DVR04 at the site. For Remote

Access Configuration, please refer to the

REMOTE software User’s Guide.

1. Remote Control

The remote control uses infrared (IR) and can be used up

to 16 feet away (at angles not

exceeding 60 degrees) from the VT-DVR04. IR transmitter is located at the center of

the remote control and should face the VT-DVR04.

2. VISS SET-FIND

The VISS SET-FIND Button on the remote control allows the user to bookmark a given

incident during playback and automatically return to that incident

3. Keypad

Another

prominent feature of the VT-DVR04 is the keypad located on the front panel.

Unlike it’s PC based competitors, this allows for complete operation of the VT-DVR04

without using

a computer keyboard.

Using the R

emote Control

Andere Handbücher für VT-DVR04

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Vitek DVR Handbücher

Vitek

Vitek VT-TTAR810 Bedienungsanleitung

Vitek

Vitek SAGA "XL" Series Bedienungsanleitung

Vitek

Vitek CHRONO - Bedienungsanleitung

Vitek

Vitek VT-TR5HA1620 Bedienungsanleitung

Vitek

Vitek SAGA "ST" Series Bedienungsanleitung

Vitek

Vitek OnCue Bridge Bedienungsanleitung

Vitek

Vitek VT-TNR818P Bedienungsanleitung

Vitek

Vitek TRANSCENDENT VT-TR8HA Series Bedienungsanleitung

Vitek

Vitek VT-EH Series Bedienungsanleitung

Vitek

Vitek Transcendent VT-TR8NHA Series Bedienungsanleitung

Vitek

Vitek VT-HDOC4 Bedienungsanleitung

Vitek

Vitek VT-HDOC Series Bedienungsanleitung

Vitek

Vitek VT-NV1600P Bedienungsanleitung

Vitek

Vitek VT-TNR414P Bedienungsanleitung

Vitek

Vitek TRANSCENDENT VT-TNR1626PL Bedienungsanleitung

Vitek

Vitek CHRONO - Bedienungsanleitung

Vitek

Vitek VT-EH Series Bedienungsanleitung

Vitek

Vitek VT-SRE Spire Elite Bedienungsanleitung

Vitek

Vitek VT-TR2HA3281 Bedienungsanleitung

Vitek

Vitek TRANSCENDENT VT-TNR1626PN Bedienungsanleitung

Vitek

Vitek SAGA VT-ST440H Bedienungsanleitung

Vitek

Vitek Transcendent Series Bedienungsanleitung

Vitek

Vitek VT-DVR16000 Bedienungsanleitung

Vitek

Vitek Transcedent VT-TNR Series Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

FSM

FSM Colibri Grande PRO Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung