Vivo DESK-E-200W Bedienungsanleitung

Instruction ManualInstruction Manual

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

White Electric Dual Motor Desk Frame

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

SKU: DESK-E-200W

https://vivo-us.com/products/desk-e-200w

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or

inappropriate use.

WARNING!

ELECTRICAL SAFETY INSTRUCTIONS

THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC

SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.

• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.

• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.

• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR

SELLER TO REPLACE DAMAGED PARTS.

• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE

MADE CONTACT WITH LIQUIDS.

• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.

• OUTDOOR USE IS PROHIBITED.

OPERATING INSTRUCTIONS: When the system is powered on, you will hear a beep and the existing desktop

height will be displayed on the control panel.

Upward and Downward Movement

Press and hold the up or down arrow until the desk reaches the desired height.

Memory Mode

To store a certain height in the controller’s memory, first press “M”. The letter “S-” will be displayed. Now

press “1”, “2” or “3” to store the current height in memory. Each number can store a dierent height. Once in

memory, you can recall any of the three height settings by pressing the corresponding button.

Reset Mode

While the unit is powered on, press the down arrow until the desk moves to the fully lowered position.

Restart the system by unplugging for at least 5 seconds and plug back in, then hold the down arrow until

RST is displayed. Continue holding the down arrow and the desk will move to the lowest position, then raise

slightly and stop to complete the reset process.

Anti-Collision Sensitivity Adjustment

Press and hold the up and down arrows together for 5 seconds to switch to the anti-collision sensitivity

adjustment. Sensitivity is set to A-3 (high) by default. Use the up and down arrows to scroll through A-0 (o),

A-1 (low), A-2 (medium) and A-3 (high). Wait 5 seconds, and the setting will be saved. With anti-collision on,

the desk will stop and reverse slightly to avoid damage.

OPERATING CONTROL PANEL

NOTES

• Self-protection function: The unit will enter a protective mode should the system operate

in excess of 2 minutes. The system will return to normal operation aer approximately 18

minutes.

• Over-current protection mode: While operating, should the load on the desk exceed rated

specifications, the system will enter into over-current protection mode to protect the system

from damage. When this happens, the desk will move downward slightly and come to a stop

with the current height displayed.

• Do NOT remove or reconnect power to reset the unit when in a protective “E01” or “E02” state,

as this may damage the electronics.

TROUBLESHOOTING

Raise desktop

slowly to keep

items stable.

Keep monitor and

laptop base fully on

the desktop.

Leave enough slack

in cable to allow for

full range of vertical

motion (15” / 38 cm).

Follow the cable

routing instructions to

avoid the potential to

pinch cables.

CAUTION!

Failure to follow these instructions may result in property damage and/or personal injury.

If the displayed height no longer matches the actual height, reset the desk by following the “Reset

Mode” directions.

If the desk stops moving and the display shows “E01” or “E02”, allow the desk to rest for at least 18

minutes before attempting to operate again.

If the desk is not operational, disconnect the power, motor and control panel from the control unit.

Aer waiting for at least 10 seconds, reconnect the motor and panel to the control unit, then reconnect

power.

If RSR/RST appears, an error has occurred and entered reset mode for protection; complete reset

process to clear error.

LAST UPDATED: 04/19/2021

REV3.1

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Andere Vivo Rack & Stand Handbücher

Vivo

Vivo MOUNT-KB08SW Bedienungsanleitung

Vivo

Vivo DESK-V133E Bedienungsanleitung

Vivo

Vivo STAND-TV22B Bedienungsanleitung

Vivo

Vivo STAND-SIT1BW Bedienungsanleitung

Vivo

Vivo MOUNT-KB05W Bedienungsanleitung

Vivo

Vivo STAND-V001V Bedienungsanleitung

Vivo

Vivo MOUNT-HP32Q Bedienungsanleitung

Vivo

Vivo STAND-V003D Bedienungsanleitung

Vivo

Vivo DESK-V100EB Bedienungsanleitung

Vivo

Vivo DESK-V000VE Bedienungsanleitung

Vivo

Vivo MOUNT-M-FD37B Bedienungsanleitung

Vivo

Vivo STAND-VRH1B Bedienungsanleitung

Vivo

Vivo STAND-V001F Bedienungsanleitung

Vivo

Vivo STAND-TV55S Bedienungsanleitung

Vivo

Vivo STAND-V104B Bedienungsanleitung

Vivo

Vivo STAND-V011H Bedienungsanleitung

Vivo

Vivo MOUNT-POLE05O Bedienungsanleitung

Vivo

Vivo STAND-SHELF60B Bedienungsanleitung

Vivo

Vivo STAND V001B Bedienungsanleitung

Vivo

Vivo STAND-V002JW Bedienungsanleitung

Vivo

Vivo STAND-V003V Bedienungsanleitung

Vivo

Vivo STAND-V012T Bedienungsanleitung

Vivo

Vivo DESK-M051MB Bedienungsanleitung

Vivo

Vivo MOUNT-SPSB1 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung