Volt VPL-1002 Bedienungsanleitung

VOLT®Low Voltage Landscape Lighting

VOLT® Elegant Harp Path & Area Light

VPL-1002

INSTALLATION INSTRUCTIONS

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

- 1 -

VOLT®Elegant Harp Path & Area Light

VPL-1002

Package Contents

Product Dimensions

INSTALLATION INSTRUCTIONS

A. (1) Fixture Body

B. (1) Shade

C. (1) Stake

www.voltlighting.com [email protected] • 813.978.3700

10” 8”

2”

26”

D. (1) LED Lamp

E. (1) Diffuser

- 2 - - 3 -

Important: Please Read Before Installation

IMPORTANT SAFETY INSTRUCTIONS

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or

more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL Listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

INSTALLATION INSTRUCTIONS

www.voltlighting.com

VOLT® Elegant Harp LED Path & Area Light

VPL-1002

[email protected] • 813.978.3700

Install Fixture Body to Stake

Clear away an area in the ground at

the wireway slot on top of the stake.

Lay the luminaire pigtail into the

wireway slot and thread the coupler

at the bottom end of the xture body

onto the stake. Tighten until snug to

secure the base.

Wire Connection

Pigtail

Main Supply Cable

Wire Connectors

Install Stake

Board

Stake

Soil

Ground

- 4 - - 5 -

Determine the desired location for mounting

the luminaire. Hammer the stake into the

ground until ange of stake is ush to grade.

To avoid damage to the stake, place a board on

top of the stake while hammering.

NOTE: If the ground is hard and the stake

is difcult to install, make a crosscut in the

ground using a at shovel.

Strip both leads from the luminaire pigtail. Using two wire connectors

(sold separately), connect the leads from the luminaire to the main low

voltage supply cable leads.

Fixture Body

Base

Stake

Pigtail

Wireway Slot

Remove Dome Lens

Install Bulb

Loosen the dome lens from the

holder to expose the socket.

Insert bulb with the correct wattage

and type marked on the xture label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch bulb with bare

hands. Use soft cloth to handle bulb.

Holder

Socket

Dome Lens

Bulb

INSTALLATION INSTRUCTIONS

www.voltlighting.com

VOLT® Elegant Harp LED Path & Area Light

VPL-1002

[email protected] • 813.978.3700

- 7 -- 6 -

Install Dome Lens

Thread the dome lens back onto the

holder and hand tighten.

Dome Lens

Holder

Install/Replace Bulb

Please reference Step 4 - Step 6 to expose the Bulb and replace it with the

correct wattage and type marked on the xture label. Reinstall Shield.

IMPORTANT: LED Bulb must be protected from moisture and dust at all

times. Always reinstall shield when removed.

- 8 -

IS-VPL-1002-VERN.1.pdf

Specications and product details subject to change without notice.

reserved. [email protected] • 813.978.3700

www.voltlighting.com

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Inhaltsverzeichnis

Andere Volt Landschaftsbeleuchtung Handbücher

Volt

Volt VFL-4501-4-BBZ Bedienungsanleitung

Volt

Volt VFL-450X-BBZ Bedienungsanleitung

Volt

Volt VHS-6719-BBZ Bedienungsanleitung

Volt

Volt VAL-1811-40-BBZ Bedienungsanleitung

Volt

Volt VSSI-2005-50-BK Bedienungsanleitung

Volt

Volt VPL-1054 Bedienungsanleitung

Volt

Volt VDL-6000 Bedienungsanleitung

Volt

Volt VHS-605-4-FPG Bedienungsanleitung

Volt

Volt VAL-1052-BBZ Bedienungsanleitung

Volt

Volt VAL-1810-40-BBZ Bedienungsanleitung

Volt

Volt VHS-650-4-BBK Bedienungsanleitung

Volt

Volt VSPL-9001-25-BBZ Bedienungsanleitung

Volt

Volt VDL-6008-4-BBZ Bedienungsanleitung

Volt

Volt Belladonna LED Path/Area Bedienungsanleitung

Volt

Volt All-Star VAL-1814-40-BBZ Bedienungsanleitung

Volt

Volt VFL-4002-ABZ Bedienungsanleitung

Volt

Volt VAL-2044-L-ABK Bedienungsanleitung

Volt

Volt All-Star VAL-2000 Series Bedienungsanleitung

Volt

Volt VWL-500-4-PBK Bedienungsanleitung

Volt

Volt VFL-4027 Bedienungsanleitung

Volt

Volt VFL-4001-LI-ABZ Bedienungsanleitung

Volt

Volt VPL-1006 Bedienungsanleitung

Volt

Volt 510 Series Bedienungsanleitung

Volt

Volt Guardsman VPL-1011 Bedienungsanleitung

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

U.S.T.E.

U.S.T.E. VISTA 8202 Bedienungsanleitung