VS Sassoon VSM189RA Montageanleitung

TOOL TIPS

for the rechargeable facial trimmer

+ detailer with full accessories.

VSM189RA

the

BEARD

\\ SHAPER

HEY YOU!

TAKE A BOW FINE SIR.

THINGS ARE LOOKING UP

& YOU’VE JUST MADE A

QUALITY PURCHASE

WITH THIS NEW GROOMING TOOL.

WE KNOW YOU’VE GOT THIS, BUT BEFORE YOU JUMP INTO

USING YOUR NEW SIDE KICK, HERE’S A FEW TIPS & TRICKS

TO KNOW BEFORE LETTING YOUR CREATIVITY RUN LOOSE.

HIT UP VSFORMEN.COM.AU FOR MORE GROOMING & INSPIRATION.

THE BEARD SHAPER / TOOL TIPS

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially when children are present, basic

safety instructions should always be followed, including the following:

Polythene bags over product or package may be dangerous. To avoid danger of

suffocation, keep this wrapper away from babies and children. This bag is not

a toy.

DANGER: When the unit is used in a bathroom, unplug it after use

since the proximity of water presents a hazard even when the

appliance is switched off

WARNING: Do not use or leave the AC power adaptor in a position where it

can become wet or there is a danger of it falling into a basin or other vessels

containing water. Keep the appliance dry, unless it otherwise specified. Do

not use this appliance in or near bathtubs, showers, basins or other vessels

containing water.

- Do not immerse appliance in water or other liquids.

- Do not reach for an appliance that has fallen into water. Unplug immediately.

- Take care to avoid contact between the moving blades of the unit and the

skin, paying particular attention to the face, neck and hands.

- This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the

appliance.

WARNING: For purposes of recharging battery, only use detachable supply unit

CA51 provided with this appliance.

THE BEARD SHAPER / TOOL TIPS

IMPORTANT: Always unplug the appliance when not in use or before cleaning.

Do not leave unattended when plugged in or switched on. Do not place on any

heat sensitive surface.

- Do not use any attachments other than those supplied by Conair Australia

Pty Ltd.

- Use this appliance only for its intended use as described within this

instruction booklet.

- Always unplug the appliance when fully charged.

- This appliance is not intended for commercial use.

- Never drop or insert any object into an opening.

- Do not use the appliance with damaged or broken attachment combs or with

any teeth missing from the blades, as injury may occur.

- Do not place on any surface while it is operating.

- Keep the cord away from heated surfaces

- Never twist or pull on the power cord.

- Do not use an extension cord with this appliance.

- After use do not wrap the cord around the appliance as in time this may cause

the cord to fracture. Coil cord loosely by the side of the appliance in storage.

- Do not use outdoors or operate where aerosol (spray) products are being

used or where oxygen is being administered.

- Do not use the appliance if it is damaged. In the event of damage, discontinue

use immediately and contact your dealer for instructions on returning it for

examination or exchange. If the supply cord is damaged, it must be replaced

by the manufacturer, its service agent or similarly qualified person in order

to avoid a hazard.

- Always ensure that the voltage to be used corresponds to the voltage marked

on the unit.

- For additional protection, the installation of a residual current device

(RCD) with a rated operating current not exceeding 30mA is advisable in

the electrical current circuit supplying the bathroom. Ask your installer for

advice.

1. Cordless use

2. TRIMMING BLADE - 30mm

wide blade for beard, stubble,

moustache & goatee trimming

3. DETAILING BLADE - 7mm

precision blade for detailing

& the finishing touches on

your beard, stubble, sideburns

& eyebrows

4. 0.4mm stubble comb guide

5. 0.8mm stubble comb guide

6. 5 position comb guide (2mm

to 10mm) for tackling short or

longer length beards & goatee

7. Beard shaping guide

8. Drawstring storage pouch

9. Cleaning brush

10. Oil

11. Adapter

THE BEARD SHAPER

BRAVO. YOU’VE MADE A QUALITY PURCHASE.

The Beard Shaper is the rechargeable facial trimmer

+ detailer with full accessories.

THE BEARD SHAPER / TOOL TIPS

6 732

THE BEARD SHAPER / TOOL TIPS

PREPPING YOUR

NEW TOOL

CHARGING

The Beard Shaper is so easy to use. But before you start using your new tool, you

must take the time to charge it overnight for 16 hours before its first use. Your

new tool comes with a small amount of charge, but the initial charge will ensure

your new tool will have optimum power performance to give you smooth fast

cutting, every time.

- Before using for the first time, fully charge your new tool continuously for16

hours.

- Maximum battery capacity will only be reached after 3 charging &

discharging cycles.

- Ensure your new tool is switched off.

- Insert the small plug on the charging adaptor into the socket on the bottom

of your new tool.

- Plug the charging adaptor into a suitable mains power socket and switch on.

If the battery is very weak, wait about 1 minute.

- The red charging LED indictor light on your new tool will light up when

correctly connected to the mains power. When it is fully charged, the red

charging LED indicator light will remain on.

- A full charge will supply 30 minutes cordless runtime.

- To maintain optimum capacity of the rechargeable battery, it is highly

recommended to fully discharge & then recharge your tool for 16 hours every

3 months.

THE BEARD SHAPER / TOOL TIPS

HOW TO USE THE

BEARD SHAPER

BEFORE USING

• Always inspect the trimmer blades for noticeable signs of damage.

• Always inspect the trimmer blades before use to ensure they are free from

hair, debris etc.

• Ensure the trimmer is sufficiently charged before use.

• For best performance use on clean, dry hair that has been combed until

tangle-free.

OILING THE BLADES

To get the sharpest, most precise cut, it is highly recommended to oil the blades

about once a month.

Using the oil supplied with your new tool, unscrew the cap & cut off the very end

of the plastic tube with a pair of scissors to release the oil.

Switch your tool on, gently squeeze the oil tube & apply 2 drops of oil onto the

blades. Leave the tool on for a further few seconds to allow the oil to thoroughly

spread across each of the blades. Switch off the tool & remove any excess oil by

gently dabbing with a cloth.

THE BEARD SHAPER / TOOL TIPS

CHANGING THE ATTACHMENT HEADS

• Before changing the heads, ensure the appliance is switched off.

• To remove a head, hold the handle of the appliance with one hand, hold the

head with the other hand and pull the head back and away from the front of

the handle.

• To attach a head, the driving pin needs to be in a central position. If it is not

in the centre, manually move the pin into position. Then, making sure that the

base of the head is seated in the handle, click the head into position.

THE BEARD SHAPER / TOOL TIPS

TRIMMING TIPS

Hit up www.vsformen.com.au for more grooming tips & inspiration.

USING THE 30MM TRIMMING BLADE

The 30mm wide trimming blade has been designed for stubble, beard & moustache

trimming + shaping.

The following comb guides are for use with the 30mm trimming blade:

• 2 stubble comb guides (0.4mm + 0.8mm) for trimming stubble & moustache, and the;

• 5 position comb guide (2mm to 10mm) for tackling short or longer length beards &

goatee.

The 30mm trimming blade can also be used without any comb guide attached to outline,

and for an even closer finish.

USING THE 30MM TRIMMING BLADE TO OUTLINE

The 30mm trimming blade without a comb guide attached will cut roughly to a length of

0.5 mm.

1. Do not attach a comb guide.

2. Hold the trimmer upside down with the blade facing downwards, yet flat against the

skin.

3. Move the trimmer gently downwards in small strokes around the edge of the area you

wish to outline.

4. Having defined the outline, hold the trimmer with the blades pointing upwards, yet

flat against the skin and move the trimmer upwards against the direction of hair

growth. This will trim the unwanted hair adjacent to the outline.

BE CAREFUL NOT TO APPLY EXCESS PRESSURE

TO THE BLADE, AS THIS MAY DAMAGE THE BLADE

AND CAN RESULT IN INJURY TO THE SKIN DURING

TRIMMING

Inhaltsverzeichnis

Andere VS Sassoon Elektrorasierer Handbücher

VS Sassoon

VS Sassoon VSM7472A Bedienungsanleitung

VS Sassoon

VS Sassoon Metro Groom Bedienungsanleitung

VS Sassoon

VS Sassoon The Crafted Trim VSM7847A Montageanleitung

VS Sassoon

VS Sassoon THE GROOM CAPTAIN Montageanleitung

VS Sassoon

VS Sassoon I-TRIM STUBBLE+ VS7855A Bedienungsanleitung

VS Sassoon

VS Sassoon VSM890A Bedienungsanleitung

VS Sassoon

VS Sassoon Trim & Groom VSM856A Montageanleitung

VS Sassoon

VS Sassoon Xpert Groom Bedienungsanleitung

VS Sassoon

VS Sassoon THETRIMBUDDY VSM702A Montageanleitung

VS Sassoon

VS Sassoon The All-Rounder VSM837A Montageanleitung

VS Sassoon

VS Sassoon VS7053A Bedienungsanleitung

VS Sassoon

VS Sassoon The Rugged Commander Lithium All-In-One Bedienungsanleitung

VS Sassoon

VS Sassoon Xpert Beard VSM7865A Montageanleitung

VS Sassoon

VS Sassoon ELITE CLIP VSM6000A Montageanleitung

VS Sassoon

VS Sassoon VSM2330A Montageanleitung

VS Sassoon

VS Sassoon Metro Cordless HairCut VS704A Bedienungsanleitung

VS Sassoon

VS Sassoon VSM7318A Montageanleitung

VS Sassoon

VS Sassoon The Beard Designer Bedienungsanleitung

VS Sassoon

VS Sassoon LITHIUM-PRO GROOM BUDDY VSM7420A Montageanleitung

VS Sassoon

VS Sassoon THE BEARD BUDDY VSM703A Montageanleitung

VS Sassoon

VS Sassoon PRO METAL Series Bedienungsanleitung

VS Sassoon

VS Sassoon VS7050A Bedienungsanleitung

VS Sassoon

VS Sassoon Twin Trim VSM1A Montageanleitung

VS Sassoon

VS Sassoon VS7863A Bedienungsanleitung

Beliebte Elektrorasierer Handbücher anderer Marken

Philips

Philips MicroAction 4402LC Bedienungsanleitung

Philips

Philips HQ7740 Bedienungsanleitung

Philips

Philips Norelco BG2022 Bodygroom Bedienungsanleitung

Norelco

Norelco Quadra 7610X Bedienungsanleitung

Philips

Philips 7616X Bedienungsanleitung

Philips

Philips HQ802 Bedienungsanleitung

Philips

Philips HQ7363/17 Bedienungsanleitung

Braun

Braun WaterFlex WF2s Bedienungsanleitung

Philips

Philips NORELCO S7371 Bedienungsanleitung

Daga

Daga MT-400 Handbuch

Remington

Remington BHT100 Bedienungsanleitung

Philips

Philips Bodygroom BG2000 Bedienungsanleitung

Kompernass

Kompernass KH 5537 Bedienungsanleitung

Remington

Remington BHT6100 Bedienungsanleitung

Philips

Philips qc5365 Bedienungsanleitung

MIA

MIA Aqua Body Bedienungsanleitung

Philips

Philips NORELCO AT880 Bedienungsanleitung

Matheo

Matheo MLR 15 Bedienungsanleitung