Wasp 2D Bedienungsanleitung

Product Reference Guide

Wasp DuraLine

2D Imager

Dura

tion or the procedures described therein may be reproduced or transmitted in any

form or by any means without prior written permission of WASP Technologies or its

wholly owned subsidiaries. Owners of WASP products are hereby granted a non-

exclusive, revocable license pursuant to the respective End-User License Agreement

(EULA) included with the product, to reproduce and transmit this documentation for

the purchaser's own internal business purposes. Purchaser shall not remove or alter

any proprietary notices, including copyright notices, contained in this documentation

and shall ensure that all notices appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions

by contacting the sales representative from whom the product was obtained.

Disclaimer

WASP has taken reasonable measures to provide information in this manual that is

complete and accurate, however, WASP and its licensors reserve the right to change

any specification at any time without prior notice.

WASP is a registered trademark of WASP Technologies. All other trademarks and

trade names referred to herein are property of their respective owners.

The following patents may apply: 3,991,299 • 4,570,057 •5,021,642 • 5,038,024 • 5,081,343 • 5,095,197 •

5,144,119 • 5,144,119 • 5,144,121 • 5,182,441 • 5,187,355 • 5,187,356 • 5,218,191 • 5,233,172 • 5,258,606

• 5,286,960 • 5,288,985 • 5,420,409 • 5,463,214 • 5,541,419 • 5,569,902 • 5,591,956 • 5,723,853 •

5,723,868 • 5,773,806 • 5,773,810 • 5,780,834 • 5,784,102 • 5,786,586 • 5,825,006 • 5,831,254 • 5,837,985

• 5,838,495 • 5,900,613 • 5,914,476 • 5,929,418 • 5,932,862 • 5,942,741 • 5,949,052 • 5,965,863 •

5,992,744 • 6,045,047 • 6,060,722 • 6,119,939 • 6,164,544 • 6,491,223 • 6,254,003 B1 6,264,105 B1 •

6,275,388 B1 • 6,298,176 B2 • 6,370,003 B1 • 6,371,374 B1 • 6,651,428 B2 • D 459,728 • D400,199 •

6,491,223 • 6,585,159 B1 • 6,561,428 B2 • Additional Patents Pending.

Product Reference Guide 1

Table of Contents

Chapter 1 Getting Started .........................................................1-1

About This Manual ............................................................................ 1-1

Manual Conventions .................................................................... 1-2

Resetting the Standard Product Defaults .............................................. 1-2

Plug and Play ................................................................................... 1-3

Connecting the Imager with an RS-232 Serial Port ................................ 1-3

Connecting the Imager with USB ........................................................ 1-4

IBM SurePos .............................................................................. 1-5

USB PC or Macintosh®Keyboard .................................................. 1-6

USB HID ................................................................................... 1-6

Chapter 2 Terminal Interfaces ..................................................2-1

Terminal ID ..................................................................................... 2-1

Supported Terminals ......................................................................... 2-2

Keyboard Country ............................................................................. 2-3

Keyboard Style ................................................................................. 2-5

Keyboard Modifiers ........................................................................... 2-7

RS-232 Modifiers .............................................................................. 2-8

RS-232 Baud Rate ...................................................................... 2-8

RS-232 Word Length: Data Bits, Stop Bits, and Parity ..................... 2-9

RS-232 Receiver Time-Out ........................................................ 2-10

RS-232 Handshaking ................................................................ 2-11

Chapter 3 Output ......................................................................3-1

Good Read Indicators ........................................................................ 3-1

Beeper – Good Read ................................................................... 3-1

Beeper Volume – Good Read ........................................................ 3-1

Beeper Pitch – Good Read ........................................................... 3-2

Beeper Duration – Good Read ...................................................... 3-2

LED – Good Read ....................................................................... 3-2

Number of Beeps – Good Read ..................................................... 3-3

Good Read Delay .............................................................................. 3-3

2DuraLine™ 2D Imagers

User-Specified Good Read Delay .........................................................3-4

Trigger Modes ...................................................................................3-4

Manual/Serial Trigger ..................................................................3-4

Scan Stand Mode ..............................................................................3-6

Scan Stand Symbol .....................................................................3-6

Presentation Mode .............................................................................3-6

Presentation LED Timer ................................................................3-7

Presentation Sensitivity ...............................................................3-7

Hands Free Time-Out .........................................................................3-7

Double Read Timeout .........................................................................3-8

User-Specified Double Read Timeout ....................................................3-8

LED Power Level ...............................................................................3-9

Illumination Lights ........................................................................... 3-10

Imager Time-Out ............................................................................3-10

Aimer Delay ................................................................................... 3-11

User-Specified Aimer Delay ........................................................ 3-11

Aimer Mode ....................................................................................3-12

Centering .......................................................................................3-12

Decode Search Mode ....................................................................... 3-14

Output Sequence Overview ...............................................................3-15

Require Output Sequence ...........................................................3-15

Output Sequence Editor .............................................................3-16

Output Sequence Examples ........................................................ 3-17

Output Sequence Editor .............................................................3-19

Require Output Sequence ...........................................................3-19

Multiple Symbols .............................................................................3-20

No Read .........................................................................................3-20

Print Weight ................................................................................... 3-21

Video Reverse ................................................................................. 3-21

Working Orientation ........................................................................3-22

Chapter 4 Data Editing ............................................................. 4-1

Prefix/Suffix Overview .......................................................................4-1

Points to Keep In Mind .................................................................4-1

To Add a Prefix or Suffix: .............................................................4-2

To Clear One or All Prefixes or Suffixes: .........................................4-3

To Add a Carriage Return Suffix to all Symbologies ..........................4-3

Prefix Selections .........................................................................4-4

Suffix Selections .........................................................................4-4

Function Code Transmit ...............................................................4-4

Intercharacter, Interfunction, and Intermessage Delays .........................4-5

Intercharacter Delay ....................................................................4-5

User Specified Intercharacter Delay ...............................................4-6

Interfunction Delay .....................................................................4-6

Intermessage Delay ....................................................................4-7

Chapter 5 Data Formatting....................................................... 5-1

Data Format Editor Introduction ..........................................................5-1

To Add a Data Format ..................................................................5-2

Other Programming Selections ......................................................5-3

Data Format Editor Commands .....................................................5-3

Product Reference Guide 3

Data Format Editor ..................................................................... 5-5

Data Formatter .......................................................................... 5-5

Alternate Data Formats ............................................................... 5-6

Chapter 6 Symbologies .............................................................6-1

Linear Symbologies ........................................................................... 6-2

All Symbologies .......................................................................... 6-2

Stacked Symbologies ...................................................................... 6-33

Postal Codes .................................................................................. 6-40

Chapter 7 Imaging Commands..................................................7-1

Image Snap - IMGSNP ....................................................................... 7-1

IMGSNP Modifiers ....................................................................... 7-2

Image Ship - IMGSHP ....................................................................... 7-4

IMGSHP Modifiers ....................................................................... 7-4

Intelligent Signature Capture - IMGBOX ............................................... 7-9

IMGBOX Modifiers ..................................................................... 7-10

Chapter 8 OCR Programming ....................................................8-1

OCR Fonts ....................................................................................... 8-2

OCR ......................................................................................... 8-2

U.S. Currency Font ..................................................................... 8-3

MICR E13 B Font ........................................................................ 8-4

SEMI Font ................................................................................. 8-4

OCR Templates ................................................................................ 8-5

Creating an OCR Template ........................................................... 8-5

Template Characters ................................................................... 8-6

OCR User-Defined Variables ............................................................... 8-9

Reading Multi-Row OCR ............................................................... 8-9

OCR Check Character ...................................................................... 8-10

OCR Modulo 10 Check Character ................................................ 8-11

OCR Modulo 36 Check Character ................................................ 8-11

OCR User-Defined Check Character ................................................... 8-12

Programming a User-Defined Check Character ............................. 8-12

OCR ISBN Application Example ......................................................... 8-15

OCR Template Codes ....................................................................... 8-16

Exit Selections ......................................................................... 8-17

Chapter 9 Interface Keys ..........................................................9-1

Keyboard Function Relationships ......................................................... 9-1

Supported Interface Keys .................................................................. 9-3

Chapter 10 Utilities.................................................................10-1

To Add a Test Code I.D. Prefix to All Symbologies ............................... 10-1

Show Software Revision .................................................................. 10-1

Show Data Format .......................................................................... 10-1

Resetting the Standard Product Defaults ............................................ 10-2

Test Menu ..................................................................................... 10-2

2D PQA (Print Quality Assessment) ................................................... 10-2

Power Image Configurator ............................................................... 10-3

4DuraLine™ 2D Imagers

Power Image Configurator Operations ..........................................10-3

Temporary Configuration Using Configurator .................................10-4

Installing Power Image Configurator from the Web ........................10-4

Chapter 11 Serial Programming Commands ........................... 11-1

Conventions ...................................................................................11-1

Menu Command Syntax ................................................................... 11-2

Query Commands .....................................................................11-2

Tag Field Usage ........................................................................11-3

SubTag Field Usage ................................................................... 11-3

Concatenation of Multiple Commands ........................................... 11-3

Responses ...............................................................................11-3

Examples of Query Commands ...................................................11-4

Trigger Commands .......................................................................... 11-5

Menu Commands ............................................................................ 11-6

Chapter 12 Product Specifications ......................................... 12-1

Imager Product Specifications ........................................................... 12-1

Standard Cable Pinouts (Primary Interface Cables) ..............................12-3

Serial Output ...........................................................................12-3

USB ........................................................................................12-4

Appendix A Symbologies .......................................................... A-1

Symbology Chart ............................................................................. A-1

ASCII Conversion Chart (Code Page 1252) .......................................... A-4

Code Page Mapping of Printed Bar Codes ............................................. A-7

Appendix B Sample Symbols .................................................... B-1

OCR Programming Chart ................................................................... B-4

Programming Chart .......................................................................... B-5

Product Reference Guide 1-1

Chapter 1

Getting Started

The DuraLine™ 2D Imager marks a new performance level for hand-

held area imagers. They deliver aggressive read rates and depths of field

on 1D, stacked linear, and matrix codes. This aggressiveness applies even

in challenging reading environments where low lighting conditions and

poor quality might make it difficult to read bar codes. You can rest

assured your investment will continue to supply years of use by reading

any bar codes you require, now or in the future.

Designed for today’s demanding commercial and industrial environ-

ments, the scanner offers superior image quality, speed, durability, and

the ability to read poor quality bar codes. The unit is comfortable to

hold, easy to use, rugged, and excellent for the most demanding applica-

tions.

About This Manual

This Product Reference Guide (PRG) provides programming instruc-

tions for the imager, plus product specifications and dimensions. For

installation, maintenance, troubleshooting and warranty information,

see the Quick Reference Guide (QRG). Copies of other publications for

this product are available on the CD included with the product, or

downloadable free of charge from the WASP website listed on the back

cover of this manual.

The imager is factory programmed for the most common terminal and

communications settings. If you need to change these settings, program-

ming is accomplished by scanning the bar codes in this guide.

An asterisk (*) next to an option indicates the default setting.

Getting Started

1-2 DuraLine™ 2D Imagers

Manual Conventions

The symbols listed below are used in this manual to notify the reader of

key issues or procedures that must be observed when using the PDA:

Resetting the Standard Product

Defaults

If you aren’t sure what programming options are in your imager, or

you’ve changed some options and want the factory settings restored, scan

the Standard Product Default Settings bar code below.

The chart Menu Commands, starting on page 11-6 lists the factory default

settings for each of the menu commands (indicated by an asterisk (*) on

the following programming pages).

NOTE

Notes contain information necessary for prop-

erly diagnosing, repairing and operating the

PDA.

CAUTION

The CAUTION symbol advises you of actions

that could damage equipment or property.

Standard Product Default Settings

Plug and Play

Product Reference Guide 1-3

Plug and Play

Plug and Play bar codes provide instant Imager set up for commonly

used interfaces.

Connecting the Imager with an RS-

232 Serial Port

1. Turn off power to the terminal/computer.

2. Connect the appropriate interface cable to the imager.

NOTE

After you scan one of the codes, power cycle

the host terminal to have the interface in effect.

NOTE

These instructions are for use with the RS-232

cable. This includes both Power Off the Termi-

nal (P.O.T.) and external power.

NOTE

For the imager to work properly, you must have

the correct cable for your type of terminal/com-

puter.

Getting Started

1-4 DuraLine™ 2D Imagers

3. Plug the serial connector into the serial port on your computer.

Tighten the two screws to secure the connector to the port.

4. If the terminal does not support Power Off the Terminal (P.O.T.)

connections plug the power supply into the host connector and the

AC outlet.

5. Once the imager has been fully connected, power up the com-

puter.

All communication parameters between the imager and terminal must

match for correct data transfer through the serial port using RS-232 pro-

tocol. Scanning the RS-232 interface bar code, programs the imager for

an RS-232 interface at 38,400 baud, parity–none, 8 data bits, 1 stop bit,

and adds a suffix of a CR LF.

Connecting the Imager with USB

An Imager can be connected to the USB port of a computer.

1. Connect the appropriate interface cable to the Imager and to the

computer.

NOTE

This interface applies to USB compatible mod-

els only.

RS-232 Interface

Andere Handbücher für 2D

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Wasp Barcode-Lesegerät Handbücher

Wasp

Wasp WPL304 Bedienungsanleitung

Wasp

Wasp WWS450 Bedienungsanleitung

Wasp

Wasp 2D Bedienungsanleitung

Wasp

Wasp WLS9600 Bedienungsanleitung

Wasp

Wasp WDI4600 Bedienungsanleitung

Wasp

Wasp CCD - 80SIR Bedienungsanleitung

Wasp

Wasp WWS110i Bedienungsanleitung

Wasp

Wasp WLR8950 Bedienungsanleitung

Wasp

Wasp WPL205 Bedienungsanleitung

Wasp

Wasp WPS1500 Bedienungsanleitung

Wasp

Wasp WPL308 Bedienungsanleitung

Wasp

Wasp WWS650 Administratorhandbuch

Wasp

Wasp WPL618 Series Bedienungsanleitung

Wasp

Wasp WWS550SBR Bedienungsanleitung

Wasp

Wasp WPL25 Bedienungsanleitung

Wasp

Wasp WPL608 Bedienungsanleitung

Wasp

Wasp WDI4500 Bedienungsanleitung

Wasp

Wasp CCD Scanner Betriebsanleitung

Wasp

Wasp WWS110i Bedienungsanleitung

Wasp

Wasp WWS800 Bedienungsanleitung

Wasp

Wasp WDI4500 Bedienungsanleitung

Wasp

Wasp WWS800 Bedienungsanleitung

Wasp

Wasp Wasp WDI7500 Bedienungsanleitung

Wasp

Wasp WPL610 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung