9
Consigne d’utilisation / Directions for use / Maintenance advices
Aquajogg Air AISI 316L,
2001/95/EC .
, .
pH (6,7/7,6).
The Aquajogg Air treadmill is made of anodized aluminium and marine quality AISI 316L stainless steel
conforming to standard 2001/95/EC on the general safety of products. Its anti-corrosion treatment makes it
suitable for chlorinated water, seawater and thermal waters. It does not require any special care in pH-
controlled water (6.7 / 7.6).
1. Aquajogg Air ,
.
Remove the Aquajogg air after every use, rinse it with soft water, and wipe it.
2. pH ( pH 7,2).
Regularly check the pH of your swimming pool (pH 7.2 advisable).
3. Aquajogg Air
. Aquajogg Air , ,
(- ).
Remove the Aquajogg Air during manual dosages of chemical products or impact treatments. Keep the bike
away to avoid any splashes that can stain or any deposits (due to the concentration of chemical products).
4. , .
Deposits of powder, salt, corrosive products that encourage the corrosion process.
5. ( ),
Aquajogg Air ,
.
When rst cleaning the surfaces of the swimming pool (before lling it) as well as subsequent maintenance
cleaning, it is advised that you remove the Aquajogg Air from the pool so as to avoid any risk of stains or
deposits.
6. Aquajogg Air, ,
, , ,
.
When you are not using the Aquajogg Air, it must be rinsed thoroughly with soft water, then dried and stored
in a location away from chemical products, as well as equipment used for dosing chemical products for pool
maintenance.
7. ,
.
.
If there are lime-scale deposits or stains, these can be removed with a cleaner for anodized aluminum and a
non-abrasive soft cloth. Then wash with clean water and dry it completely.
8. Aquajogg Air , ,
.
When you put the Aquajogg Air on the water, hold back the bike for prevent impact and damage to your pool
or your treadmill.
pH . pH 6,7 7,6.
, pH,.
( , inox )
WARNING
Check the pH of the water on each utilisations. The pH water should be between 6.7 and 7.6. Any
damages caused by a wrong pH balance cancel the warranty.
(For anodized aluminum, inox parts, and silicone parts)
